Why does my iMac not recognize my iPod nano?

I recently purchased an iPod nano, with the touch screen, for my wife. Obviously she wanted to immediately connect it to our iMac 27" and transfer her music files. But the iMac does not recognize the iPod, whatever we try. It does not turn up in iTunes, the Finder or System report, and it does not charge. The really strange thing is that the computer has no problems with my HTC Wildfire, running Android. It also has no problems with flashdrives, our portable hard drive or printer. Only the iPod. So much for the "Im a mac and I always work.. diddely."
I have tried the following:
Reset the iPod nano by holding the power button until the grey apple appeares
Restore the iPod nano from a PC running Windows XP (Which had no problems recognizing the device by the way)
Tried to connect with two different cables (Wich again both worked well with on the PC)
Updated iTunes to the newest version
Ugraded from Snow to Lion
Reset PRAM, NVRAM and SMC
Shouting
None of those has made any difference. What should I do next?
My Mac is a iMac 27", produced in 2009, 3,06 GHz Intel core 2 Duo, 4 GB 1067 MHz DDR3 Ram S/N: W80031TH5PE. Running MacOS X 10.7.2
The iPod is a nano, latest generation with the touch screen, Model no: A1366 EMC No: 2385. S/N: DCYFX08WDDW2

Reformatting will wipe out everything you synced to it.  Check out the iPod nano (6th generation) - User Guide  for reformatting instructions and other troubleshooting suggestions if you have not already done so.
Suggest that you do a search through  Knowledge Base
Read the postings listed in the "More Like This" column over here:  ---------------->
If you are still having problems after doing the above and in view of Apple Stores not replacing and/or charging you for repairs, strongly suggest that you call Apple Customer Relations @ 1-800-767-2775.  Explain to them exactly what you stated in your postings.
Good luck!

Similar Messages

  • Why does my iMac not show in Find My iPhone?

    Why does my iMac not show in Find My iPhone? Is there something I should switch on?

    System Preferences - iCloud - check mark Find my Mac.

  • Why does elements 11 not recognize nikon nef files

    I have been using Elements 11 for quite a while for Canon Raw files with great success. It really works fine for me.
    I recently bought a Nikon D300. For some reason Elements 11 will not recognize the Nikon NEF raw files.
    W H Y ? ? ?

    Thank you for your reply.
    Answers to your questions:
    I am using Win7 64 bit. Elements 11 has worked just fine until I attempted to process NEF files.
    I always copy files to my HD before trying to process any.
    How do I check to see if my Camera Raw module is current? EVERY time, regardless of day of the week or time of day, when do the Help/Update thing I ALWAYS  get that message block about website is busy, try again. I'll bet I've tried it over a hundred times over the past two weeks or so. I have a feeling that it can't be that busy for that long. Or, maybe I'm just unlucky, or maybe your server is too small to handle the load.
    Needless to say, I am really frustrated with Adobe.
    Again, thank you for your reply, and hopefully my answers will provide a solution.
    Regards,
    ChuckWagner
    R_Kelly <[email protected]> wrote:
    R_Kelly  created the discussion
    "Why does elements 11 not recognize nikon nef files"
    To view the discussion, visit: https://forums.adobe.com/message/6643873#6643873
    >

  • Why won't my laptop recognize my iPod nano second generation when I plug it in via USB? It does recognize my ipad mini. I was hoping to transfer music from my iPod to my ad mini

    Why won't my laptop recognize my iPod nano second generation when I plug it in via USB? It does recognize my ipad mini. I was hoping to transfer music from my iPod to my ipad mini

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4. Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. You can use some third party software like this iPod file transfer, it can help you copy files from iPod to computer, and then you can use iTunes to sync the music to your iPad mini.
    7. Check for third-party software conflicts.

  • Itunes does not recognize my ipod nano

    itunes does not recognize my ipod nano 6, it is a used one and has 1600 plus songs, it shows the songs, but won't let me do anything with them

    I had this exact problem. I had to plug the iPod into a USB port on the back of the computer tower not the fron ones. Hope this helps.

  • Have a new computer. iTunes will not recognize my iPod Nano only my iPod Touch.  The Nano was used on the old computer.

    My new computer will not recognize my iPod Nano.  The Nano was used on the old computer.  I also have an iPod Touch and this is recognized.

    Hello victoriafromurbana,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your iPod nano is not recognized on your computer, please follow the appropriate troubleshooting steps in the article below for your type of computer.
    iPod not appearing in iTunes - Apple Support
    Take care,
    Alex H.

  • Itunes will not recognize my ipod nano when it is plugged into the computed

    itunes will not recognize my ipod nano when it is plugged into the computed

    Check this post: https://discussions.apple.com/message/6985613#6985613

  • HT1449 I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch).  All music is there and playable but will not recognize any devices

    I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch).  All music is there and playable but will not recognize any devices. Help please

    The ipod is not a backup/storage device.
    You need to copy everything from your old computer to your new one.
    The Apple store will do this for you,  you can call apple support and they will help you, you can use google.

  • ITunes does not recognize my iPod Nano Gen. 4

    I have a MacBook Pro Retina with the latest version of iTunes installed on it and an iPod Nano Gen. 4. The problem that I have is as follows: My Mac does recognize my iPod but just as storage device. iTunes does open when I plug in my iPod but I cannot find any iPod icon on iTunes and therefore cannot upload anything to the iPod via iTunes.
    I have performed a reset procedure on the iPod, restarted my Mac, and tried out different USB cables and ports but iTunes still does not recognize my iPod.
    How do I solve this problem?

    Check here:
    http://support.apple.com/kb/TS1363

  • Why does my iMac not shut down when I try to shut it down?

    Wh does my iMac not shut down, or restart when I try to do either.  It just sits there with the little loading circle continuously moving.  The only way I can shut it down is if I hold down the power button to shut it down.  Can anyone tell me why this is?
    Thanks!

    Open your Activity Monitor and check to see what is running?
    If there is some important Process running, then it is better to wait until it has finished instead of cutting the power and corrupting who knows what?
    If there is nothing important running, then follow the instructions in the link below for resetting the SMC.
    Intel-based Macs: Resetting the System Management Controller (SMC)

  • Windows does not recognize my ipod nano 7 gen

    Windows 7 doesn't recognize ipod touch.

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Then try with the iPod in forced disk mode.
    Putting iPod into disk mode.
    Still no joy, see if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod

  • Computer does not recognize my ipod nano (2nd gen.)

    Hi!
    I'm having a problem with my 2nd generation ipod nano. My ipod itself works fine! The thing is that my computer won't recognize it. It says something about there being some "malfunction" or other. Also, for some reason it doesn't want to charge right. Can someone please help me with this?

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Then try with the iPod in forced disk mode.
    Putting iPod into disk mode.
    Still no joy, see if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod

  • TS1363 no matter what I do Itunes will not recognize my ipod nano..I've tried everything and all directions

    No matter what I try i can not get itunes to recognize my ipod nano when I connect.  I have tried multiple trouble shooting fixes on the site. 

    scootchy69 wrote:
    I have tried all that…I have tried multiple chargers and have not had any success! I think I have a lemon! Not too happy about all this either because I will probably have to pay for support since I have had the phone for more than 90 days
    While Apple may request a Pay-Per-Incident, if it is determined that your device has a hardware issue, that PPI will bewailed after troubleshooting is completed. Or, you can request that they waive that if you've already done a lot of troubleshooting.  The PPI is only for issues that a user could resolve on their own but want Apple to provide a walkthrough over the phone.  You can get free support by going to an Apple Store instead, for example, as well.

  • My computer will not recognize my iPod Nano when i connect it. I tried my laptop instead but it said the same thing - one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it. Can i fix this?

    My 16 gig iPod Nano 7th gen was put of power. I connected it to the computer and it started to turn on (the apple appeared in the middle of the screen). Then left it two minutes and the computer went into sleep mode. My iPod nano had gone off and now it will not turn on, or connect to the computer, so i cannot charge it. I am not sure if it is a problem with the usb cable. When I conntct the cable to the computer nothing happens, but then when i connect the iPod to the cable it says 'one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it'. Please don't say its broken already

    It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

  • Why does PS 7 not recognize Adobe RGB files?

    I have an Olympus E-620 DSLR. When I set the color space in the camera to sRGB, after downloading the images, when I click to open them in Photoshop 7, the images are properly identified as sRGB files. When I set the color space in the camera to Adobe RGB, Photoshop does not recognize the format. Please see the picture below.
    Question 1: Why does Photoshop not recognize the Adobe RGB files?
    Question 2: What can I do to make Photoshop recognize Adobe RGB files?
    Question 3: If I assign in Photoshop the Adobe RGB profile to an unrecognized Adobe RGB file, does that even make any sense? Is the "extra data" that Adobe RGB offers compared to sRB even there even if the profile is not recognized in the first place?
    I am very grateful for any comments and advice!

    Buko. wrote:
    Are you saying that the file is really AdobeRGB and because PS7 is so old its defaulting to sRGB? which is why you are assigning?
    Yes...if the file name starts with an underscore _IMG12345 then the image is indeed in Adobe RGB. It's a failure and limitation of the EXIF spec that only allows for two different EXIF tags relating to color space...either sRGB or "unspecified".
    Since the camera makers wanted to offer Adobe RGB as a color space choice in camera JPEGs, the underscore was the ONLY way to say whether a file was in sRGB or Adobe RGB. Note that camera JPEGs do NOT have an embedded profiles, just the EXIF tag. And yes, Photoshop 7 is/was too old to understand the Adobe RGB underscore color space.
    A lot of stuff has changed (sometimes radically) since that piece of software was released...heck, there wasn't even a Camera Raw until about 9 months AFTER Photoshop 7 was released. Camera Raw 1.0 was released Feb. 19th, 2003, Photoshop 7 was released about April 2002.

Maybe you are looking for

  • Printing problems with HP laserJet 1320 and new Intel iMac

    My new Intel iMac won't print to my HP 1320 from Eudora or from web browsers. The applications "quit unexpectedly". From Safari, nothing happens. I can print PDF documents and Office documents with no problems. The Intel is connected to a router via

  • Plz  explain why concatenate statement is used in BDC

    Please do not post subject or content as ALL CAPITALS hi friends,                 for the first time i am doing bdc table control.  i just cant make out the use of concatenate statement in that code.  i have gone thru some bdc table control codes in

  • How to design block diagram for axi tpg and axi vdma on zedboard using vivado 2014.4 and sdk c application

    Hi, I am working in image processing project ,but currently i want to use tpg ip and vdma ip to write frame data in ddr3 on zedboard,please provide me vivado block design and sdk c application for that  

  • System exception ERROR_MESSAGE

    Hi, A job is getting cancelled and here is the error message Job started Step 001 started (program RSPROCESS, variant &0000000043030, user ID ALEREMOTE) Error sending message to network administrator. Job cancelled after system exception ERROR_MESSAG

  • Back to the lab again

    2 router 2610 and 2501 .. connected by dte/dce .. clock rate is set on the dce. labr1= s0 192.168.1.2 labr2= s 0/0 192.168.1.3 no shut on both. I am trying to have this interfaces talk to each other no luck so far Thanks again