Why does my iMac think I live in a different state?
Sometimes, when I conduct Internet searches, the results I get for locations are in the state adjacent to my own. Most recently, I tried to go to the AAA website for my state, but the web browser keeps redirecting me to the AAA site for this other state. I have tried on both Firefox and Safari with the same results. Nothing I have tried will allow me to get to the AAA website for my state.
Is there something I need to do to reset my location?
I've had this Mac for several years, and it hasn't been a problem before.
Anyone? Anyone? Bueller?
If this is not an OSX question, could someone please direct me to a more appropriate forum.
Similar Messages
-
Why does the Hub think I live in Hampshire - I liv...
OK - here's a good one. I recently bought a used HH3 to replace a slightly flaky HH2 - all went well with setup (without the installation CD) and everything works fine ..... except when I check the weather or use Google Maps on my HTC Wildfire phone or use Google Maps on my PC. When I do, I am told I am in Southampton (where the HH3 used to "live"). I have reset everything I can (including a "hard reset" of the HH3), renamed the HH and fiddled for hours with the settings. I have gone back to my old HH2 and that too now has me incorrectly located in Hampshire. I have talked to BT tech Support who were extremely helpful but unable to find a solution. This is only the equivalent of moving house and taking their HHs with them? Does anyone on here have an answer?
Solved!
Go to Solution.It more likely to be a cookie stored on your PC and on your phone.
Try clearing out the cookies on your Internet browser that runs on your PC, then try again.
Google maps on the Android also stores your location, but that is easily corrected by updating your location. It then uses a combination of mobile phone mast position, and any nearby wireless networks, to determine your location. You can also turn on GPS for a more accurate fix.
Of course the problem with the wireless network location is that Google would have seen the MAC address of your home hubs wireless, in Southampton, so that is why it thinks you are there. That is the most likely explanation.
As Google has been stopped from gathering this data, then this will never get updated.
In theory, they were supposed to have deleted it.
The only answer would be to swap your home hub for one that has never been used anywhere Google has been.
You can prove this by going into the location setting of the phone, and unticking the option which says "Use Wireless Networks" The just use the mobile network and GPS..
The explanation above is THE most like cause of your wrong location
If you are using Google Lattitute, then that should also update your location on the PC when you login to Lattitude.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Why does applecare registration think I live in the USA
I am trying to register apllecare on my new mac book and it won't let me say that i live in the uk
Anyone? Anyone? Bueller?
If this is not an OSX question, could someone please direct me to a more appropriate forum. -
Why does my computer think I'm in a different country
For some reason when I click USE MY LOCATION on some websites, my computer thinks I'm either in Germany or BC.
I have never taken my computer out of Canada and have not even been to either place. This is quite frustrating for searches and when I'm looking to find a store around me. It even does it on Maps, why is this happening?
ANY sort of help would be awesome.
CheersSafari > Preferences > Privacy > Limit website access to location services: Prompt for each website...
If you've already chosen one of those settings, you may in a location for which the master location database is inaccurate. -
Why does my iMac display go off when I am starting up or waking up my machine from sleep..?
When my iMac goes to sleep I then later try to click the magic track pad or keyboard and it will usually then show the initial password entry login screen and then go off. The machine is still on but the display is black and will sometimes flash up the screen again if I press the magic track pad or keyboard but will then black out again..Well, there are many different reasons why it does this. It might shut off due to power voltage problems, system overheats, or there is a System Problem. The reason it might be hard to boot up is because your power button might not work properly or your system hard drive is damaged.
<Email Edited by Host> -
I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not. My questions are: Why does my computer think it's blank? And how can I copy the DVD providing my computer recognizes there is content on it?
Thanks, SheilaTV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!
-
Why does my iMac only have 1 GB of memory?
Put in more RAM. Visit OWC, DataMem, or Crucial.com to purchase memory for your model. You computer would have more memory had you put more in a long time ago.
-
Why does my iMac appear many times in my network and labelled 1,2,3, etc
why does my iMac appear many times in my network and labelled 1,2,3, etc
Ok, I solved it.
I followed this steps:
1- Turn Off Wi-Fi from the Wireless menu item
2- From the OS X Finder, hit Command+Shift+G and enter the following path:
/Library/Preferences/SystemConfiguration/
3- Within this folder locate and select the following files:
com.apple.airport.preferences.plist
com.apple.network.identification.plist
com.apple.wifi.message-tracer.plist
NetworkInterfaces.plist
preferences.plist
4- Move all of these files into a folder on your Desktop called ‘wifi backups’ or something similar – we’re backing these up just in case you break something but if you regularly backup your Mac you can just delete the files instead since you could restore from Time Machine if needed.
5- Reboot the Mac
6- Turn ON WI-Fi from the wireless network menu again -
Why does my iMac not show in Find My iPhone?
Why does my iMac not show in Find My iPhone? Is there something I should switch on?
System Preferences - iCloud - check mark Find my Mac.
-
Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart, something to do with a Panic report?
Thanks
BrianHi mende1,
you asked me to post the Kernal panic report then next time it appears, sorry for the delay but it was fine until yesterday when it happened again so here it is, hope you can make sense of this, thank you for your help.
Regards
Brian
Interval Since Last Panic Report: 97797 sec
Panics Since Last Report: 1
Anonymous UUID: 17D8F909-09A9-4BC6-A153-A12F75529506
Sun Jan 27 09:32:57 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff80002b4b31, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000800a9118, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0xffffff80008c2028, RBX: 0x00000000800a9100, RCX: 0xffffff800ae5bf00, RDX: 0x0000000000000080
RSP: 0xffffff8078713e68, RBP: 0xffffff8078713eb0, RSI: 0x000000005aefd876, RDI: 0x00000000800a9118
R8: 0x0000000000000010, R9: 0x0000000000000000, R10: 0xfffffe802662d000, R11: 0x00080000000263f3
R12: 0xffffff8078713f60, R13: 0xffffff8078713f78, R14: 0x0000000000000000, R15: 0x00000000800a9118
RFL: 0x0000000000010002, RIP: 0xffffff80002b4b31, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000000800a9118, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8078713b10 : 0xffffff8000220792
0xffffff8078713b90 : 0xffffff80002c4794
0xffffff8078713d40 : 0xffffff80002da55d
0xffffff8078713d60 : 0xffffff80002b4b31
0xffffff8078713eb0 : 0xffffff80002352a5
0xffffff8078713ec0 : 0xffffff800036489d
0xffffff8078713ee0 : 0xffffff8000345031
0xffffff8078713fb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 1750251829240
last loaded kext at 51464252613: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f815c7000, size 57344)
last unloaded kext at 215848970782: com.apple.driver.AppleFileSystemDriver 13 (addr 0xffffff7f825c2000, size 12288)
loaded kexts:
com.vmware.kext.vmnet 3.0.0
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
com.apple.filesystems.msdosfs 1.7.1
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.GeForce 7.3.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBOHCI 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 160.7
com.apple.driver.AppleHIDKeyboard 160.7
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0x24300000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: hub_device, 0x0409 (NEC Corporation), 0x0059, 0x26400000 / 2
USB Device: Tablet, 0x172f, 0x0037, 0x26410000 / 6
USB Device: Mass Storage Device, 0x058f (Alcor Micro, Corp.), 0x6362, 0x26430000 / 5
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0x26440000 / 4
USB Device: JumpDrive, 0x05dc (Lexar Media, Inc.), 0xa205, 0x26441000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 4 -
Why does my iMac display keep shutting off? Computer still running in the background. I've tried unplugging and restarting, to no avail. The computer is well out of warranty - about 7-8 years old, running 10.6.8
Checked.... the settings had not been inadvertently changed, but I did move the scroll and reset them back to the original. Hasn't shut off again.... yet. Will re-post with follow-up one way or the other. Thanks.
-
Why does my Imac screen slide and I lose my screen ~ It goes back to my desktop.
Then sometimes my screen goes to full screen without me doing any commands, and I don't know how to get out of it without going to force quit and starting all over.Hi,
When it goes full screen try moving the mouse up to top right of scren & see if there a double diagonal Arrow to click on.
On the other see if it's the silly implentation of Spaces/Mission Control/Expose in ML...
https://discussions.apple.com/thread/4298411?start=0&tstart=0 -
Why does my iMac shut down unexpectantly?
Why does my iMac shut down unexpectantly?
Check System Preferences > Energy Sacer > Schedule
And try disconnecting all periphals except for the keyboard and mouse. -
Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?
Do you mean the external hard drive is not mounted on the iMac desktop?
Check if Disk Utility sees the drive. Applications / Utilities / Disk Utility. If the external shows up in the left column, select it and click on Mount.
If it does show up this way, I recommend using DU to Repair Disk. -
Why does my iMac panic and crash when I scroll with my magic mouse or trackpad
Question Why does my iMac have kernel panics whenever I scroll with my magic mouse or trackpad
Sorted....needed a new logic board...£800... thank god for applecare
Maybe you are looking for
-
Hi all when i run yaourt to install any things : package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory why? what can i do? I'm very newbie so help me with easy commands! thanks
-
Hi All, I am working on script, Getting the output on Pdf as mentioned below, as per the requirement the credit entry CR1 should come as -96.00. I have debugged the report attached with it and I can see that the field SHKZG(Debit/Credit Indicator) of
-
Hello all, I am trying to ALE BOM changes from client 300 to 100. SO I changed the qauntity of a component and saved without using ECM . I did the ALE, but in target system it did not update the item quantity. Instead it added a new line item with
-
SBO 2007 PL06 - GetCompanyList fails
Folks, I am not able to get the list of companies on SBO 2007. The following code fails with "Failed to connect to SBOCommon" error. try { SAPbobsCOM.Company c = new SAPbobsCOM.Company(); c.Server = "Test17"; c.DbServerType = SAPbobsCOM.BoDa
-
Error when trying to release NSDate in class
Hello, Like a lot of folks here I am pretty new to this language, so I am just going to jump into it. Basically I have a very simple class that takes a NSDate object in a custom init method. Below is the code... #import <Cocoa/Cocoa.h> @interface Dat