Why does my iMac wireless keep dropping out?
My iMac wi-fi keeps dropping out intermittently. Sometimes, I can trace it to the router, but sometimes, everything else stays connected to the router, and only my iMac drops out. I can check 'speed test' app in my iPhone4s through the router and it is still working and connected, but the iMac has dropped off. It usually will connect back up, but sometimes takes 2 tries to get the job done. It is starting to get annoying in frequency.
The iMac is about 1 year old now. This has been happening recently. I suspect trouble in my airport extreme card, but don't know how to check it out.
Any ideas?
Thanks!
Jim
never mind. I went to apple care support and after deleting some plists, resetting the computer a few times and a few other tricks, it is working well again.
But to answer your questions: airport monitor of computer. I have a Cisco router. The iPhone was using internet and the speed test app showed normal connections and speed.
Thanks for your interest,
Jim
Similar Messages
-
Why does my imac mouse keep dropping out?
My bluetooth mouse on my iMac keeps dropping out even though it has relatively new batteries. Is there any hope for it?
Sometimes making a Bluetooth device a favourite can help. It fixed it for me when I had exactly the same problem:
System Preferences>Bluetooth, select the mouse on the left and then click on the small 'cog' at the bottom left of the window and select 'Show more info'. You should now get the option to make the mouse a 'favourite'.
I've also seen it suggested on here that adding a small piece of thin card/paper to where the batteries are can make them more secure and stop them breaking contact with the terminals. Not tried this one myself as I didn't need to. -
Why does my apple tv keep dropping out of home sharing.
why does my apple tv keep dropping out of home sharing.
I use homeplug powerline adapters to create my home Lan. I've never had any problem with my ATV 2.
This isn't ideal either, I would rather have shielded CAT7 cables reach all the way to my modem.
Either way, wired solutions are more reliable and have a higher potential speed as wireless uses pulsed electromagnetic radiation as a means for transportation in stead of copper or fiber optic cables
The World Health Organization's IARC has recently classified radio frequency electromagnetic fields as possibly level 2 carcinogenic to humans, concluding:
"the evidence, while still accumulating, is strong enough to support a conclusion and the 2B classification. The conclusion means that there could be some risk, and therefore we need to keep a close watch for a link between cell phones and cancer risk." -
Why does my wi-fi keep dropping out with Lion ?
Why does my wi-fi keep dropping out since I purchased Lion?
Why does my wi-fi preference keep getting lost every time my computer goes into sleep mode?
Is there any way of killing the Lion and getting Snow Leopard back.
Signed,
Tim (Had a flawless computer until I purchased Lion!) Lyke
< Edited by Host >I use homeplug powerline adapters to create my home Lan. I've never had any problem with my ATV 2.
This isn't ideal either, I would rather have shielded CAT7 cables reach all the way to my modem.
Either way, wired solutions are more reliable and have a higher potential speed as wireless uses pulsed electromagnetic radiation as a means for transportation in stead of copper or fiber optic cables
The World Health Organization's IARC has recently classified radio frequency electromagnetic fields as possibly level 2 carcinogenic to humans, concluding:
"the evidence, while still accumulating, is strong enough to support a conclusion and the 2B classification. The conclusion means that there could be some risk, and therefore we need to keep a close watch for a link between cell phones and cancer risk." -
Why does my Apple TV keep dropping out of my Wi-Fi Network?
I've only had the device for about 3 weeks and I've already returned one hoping it was a hardware issue but the new one is doing the same thing. I enter my Wi-Fi password and it will keep in for about 48 hours. Then when I go back to it I find that somehow it's kicked off and I have to manually re-enter the password and start all over. Very annoying and if I can't figure it out I will just return the device and live without it. I can watch Netflix on my Wii after all.
Anybody with similar issues or been able to fix the problem?I use homeplug powerline adapters to create my home Lan. I've never had any problem with my ATV 2.
This isn't ideal either, I would rather have shielded CAT7 cables reach all the way to my modem.
Either way, wired solutions are more reliable and have a higher potential speed as wireless uses pulsed electromagnetic radiation as a means for transportation in stead of copper or fiber optic cables
The World Health Organization's IARC has recently classified radio frequency electromagnetic fields as possibly level 2 carcinogenic to humans, concluding:
"the evidence, while still accumulating, is strong enough to support a conclusion and the 2B classification. The conclusion means that there could be some risk, and therefore we need to keep a close watch for a link between cell phones and cancer risk." -
It seems to be automatically hang without a reason.
iCloud should still help you reduce some hard drive space. Just select "optimize" in the icloud tab in Mac Photo App preferences.
Granted, not the same as completely offloading your library to a back-up drive at your location.
Good Luck! -
Why does my airport express keep cutting out?
Why does my airport express keep cutting out?
I have a 1st gen Airport Express and use it to stream music from my PC, iPhone 4, iPad and iPod Touch. My Airport Express is connected to a Teac UD-H01 DAC via an optical cable which is connected to an amp and speakers. I had no problems at all with this set up until I upgraded the Airport Express firmware to 7.6.3. The sound then started to drop out frequently. To cut a long story short after various testing, the problem had to be the Airport Express. I called Apple support but they were not much help and couldn't fix the problem and said they would speak to engineering and phone back. While I was waiting I decided to have another go to find the problem and opened the airport utility and saw that there was an option to downgrade the firmware. At this point I realised that the problems started about the same time that I upgraded the firmware to 7.6.3 but didn't think at the time that Apple would release a firmware that didn't work. Anyway I downgraded to 7.6.1 and hey presto, everything worked again. A couple of days ago I noticed that firmware 7.6.4 was available and thought I'd give it a go, not good - same problem as 7.6.3. I've downgraded to 7.6.1 again and all is well. Hope this helps.
-
Why does my iMac display keep shutting off? Computer still running in the background. I've tried unplugging and restarting, to no avail. The computer is well out of warranty - about 7-8 years old, running 10.6.8
Checked.... the settings had not been inadvertently changed, but I did move the scroll and reset them back to the original. Hasn't shut off again.... yet. Will re-post with follow-up one way or the other. Thanks.
-
Why does my iphone 4 keep dropping wifi connection since ios5.0.1update
Why does my iphone 4 keep dropping wifi connection since ios5.0.1 update, it worked perfectly before, my wifes 3gs connects fine and stays connected while my £400 paperweight losses connection, thinking of going back to nokia! Sort it out apple!
If the "oh so Great Apple" were to monitor these forums then they might see all the problems
that the people who have paid good money for their devices are having, i suppose they can do no wrong
In your eyes, i just thought that if you pay a lot of money for a product that works fine, and you update
It with a firmware update that they kept going on about how good it was and it can do this and it can
Do that, then i think they should sort it out. I don't care if i "don't deserve to be an apple owner" or not,
The fact is i paid my money and it should do what its suppose to do, i moved from Nokia to Apple because
The N97 was crap and i put up with it for too long, and they didn't do anything to fix the bugs they just stopped
Selling it and basically said tough s**t, so now this is happened i hoped Apple whould be better but they seem
To be just like the rest. -
Why does my FaceTime connection keep dropping?
Why does my FaceTime connection keep dropping?
Here's the update I promised. Hope it helps.
http://support.apple.com/kb/TS5419 -
I have a new Airport Extreme that works great with my IMac but keeps dropping out on our Windows 7 PC. I have tried all 11 2.4 Ghz channels and they all have dropout issues. Any suggestions?
Hello sstefanik
Check out the articles below to troubleshoot your issues with getting a proper connection with Wi-FI. Try creating a new Network Location and join your network to see if you can get on that way.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G. -
What is application memory and why does my macbook pro keep running out of it?
what is application memory and why does my macbook pro keep running out of it?
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Ever since i have upgraded to IOS6 My connection to my BT Hub 3 wifi router keeps dropping out whenever i am streaming video. I have an Apple TV connected as well which is fine as are other devices, its just the Ipad since the move to IOS6. It is really frustrating and i had hoped the 6.01 release would have resolved it, but it didnt. I have seen other similar comments, i just want to know if this is a common known fault which Apple are going to fix.
The strength of Apple has always been 'it just works' , i can't help but feel that there are cracks appearing in this.
DavidSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
The wireless was working fine, i had it working with network-manager i then was doing some work that i wanted to do via ethernet so switched the wireless off using the switch and now it keeps dropping out, i have had to remove network-manager as it wouldnt let me connect to wired for some reason, and have tried to get wireless re-working with wifi-menu, i have delected the config and created one using the examples and using netcfg and still having no luck. I looks as if the device is going into "power saving" and wont come out, outputs below:
iwconfig
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=17 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
lsmod
Module Size Used by
btusb 12372 0
bluetooth 192120 2 btusb
fuse 69173 3
joydev 9991 0
nvidia 11219870 43
ir_lirc_codec 4027 0
lirc_dev 9039 1 ir_lirc_codec
ir_mce_kbd_decoder 3254 0
ir_sanyo_decoder 1613 0
ir_sony_decoder 1579 0
ir_jvc_decoder 1673 0
ir_rc6_decoder 2153 0
arc4 2039 2
ir_rc5_decoder 1609 0
ir_nec_decoder 1705 0
snd_hda_codec_si3054 3534 1
snd_hda_codec_realtek 61193 1
uvcvideo 72787 0
ath9k 99678 0
ath9k_common 2096 1 ath9k
videobuf2_vmalloc 2468 1 uvcvideo
ath9k_hw 339155 2 ath9k_common,ath9k
videobuf2_memops 2246 1 videobuf2_vmalloc
videobuf2_core 24030 1 uvcvideo
videodev 100859 2 uvcvideo,videobuf2_core
sdhci_pci 10833 0
coretemp 6070 0
kvm_intel 124749 0
snd_hda_intel 26180 3
kvm 373917 1 kvm_intel
sdhci 23694 1 sdhci_pci
acpi_cpufreq 5933 1
mperf 1267 1 acpi_cpufreq
firewire_ohci 31941 0
iTCO_wdt 5255 0
rc_rc6_mce 1380 0
snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel
mmc_core 82754 2 sdhci,sdhci_pci
button 4662 0
intel_agp 10744 0
firewire_core 53173 1 firewire_ohci
psmouse 71909 0
iTCO_vendor_support 1929 1 iTCO_wdt
media 10405 2 uvcvideo,videodev
ath 15361 3 ath9k_common,ath9k,ath9k_hw
battery 6773 0
ac 2536 0
video 11276 0
processor 26855 3 acpi_cpufreq
r592 12011 0
mac80211 424764 1 ath9k
memstick 7016 1 r592
serio_raw 4689 0
tg3 139391 0
pcspkr 1899 0
microcode 12377 0
lpc_ich 10609 0
i2c_i801 9571 0
intel_gtt 15659 1 intel_agp
wmi 8379 0
compal_laptop 10890 0
i2c_core 20707 3 i2c_i801,nvidia,videodev
cfg80211 176994 3 ath,ath9k,mac80211
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 75167 3 snd_hda_codec_si3054,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18934 1 snd_pcm
snd 59989 13 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5442 1 snd
crc_itu_t 1363 1 firewire_core
evdev 10266 13
ene_ir 11590 0
rc_core 13088 11 ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,ene_ir,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder,rc_rc6_mce
libphy 19991 1 tg3
rfkill 15604 4 cfg80211,compal_laptop,bluetooth
ext4 440434 4
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
cdrom 35520 1 sr_mod
sd_mod 29559 5
ata_generic 3338 0
pata_acpi 3451 0
uhci_hcd 23436 0
ahci 21360 4
libahci 20023 1 ahci
ata_piix 23352 0
libata 167683 5 ahci,pata_acpi,libahci,ata_generic,ata_piix
scsi_mod 133386 3 libata,sd_mod,sr_mod
ehci_hcd 41816 0
usbcore 150398 4 btusb,uhci_hcd,uvcvideo,ehci_hcd
usb_common 954 1 usbcore
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600M GT] (rev a1)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Atheros Communications Inc. AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) (rev 01)
0e:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
partial dmesg showing wireless
[ 1316.731261] wlan0: authenticate with 00:24:17:f1:6c:bf
[ 1316.734194] wlan0: send auth to 00:24:17:f1:6c:bf (try 1/3)
[ 1316.759285] wlan0: authenticated
[ 1316.763262] wlan0: associate with 00:24:17:f1:6c:bf (try 1/3)
[ 1316.767549] wlan0: RX AssocResp from 00:24:17:f1:6c:bf (capab=0x411 status=0 aid=5)
[ 1316.767664] wlan0: associated
[ 1316.768426] wlan0: disassociating from 00:24:17:f1:6c:bf by local choice (reason=3)
[ 1316.780126] cfg80211: Calling CRDA to update world regulatory domain
[ 1316.780767] wlan0: deauthenticating from 00:24:17:f1:6c:bf by local choice (reason=3)
[ 1316.780786] ath: phy0: TX while HW is in FULL_SLEEP mode
Any help is appreciated
Last edited by justifier (2012-11-12 21:21:07)using the instructions at https://wiki.archlinux.org/index.php/Wi … _available
i get the following when i run wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf i have configured wpa_supplicant.conf manually
wlan0: Failed to initiate AP scan
wlan0: Failed to initiate AP scan
wlan0: Failed to initiate AP scan
wlan0: Failed to initiate AP scan
wlan0: Trying to associate with 00:24:17:f1:6c:bf (SSID='BTHomeHub2-4P9Q' freq=2457 MHz)
wlan0: Association request to the driver failed
wlan0: Associated with 00:24:17:f1:6c:bf
wlan0: CTRL-EVENT-DISCONNECTED bssid=00:24:17:f1:6c:bf reason=0
wlan0: Trying to associate with 00:24:17:f1:6c:bf (SSID='BTHomeHub2-4P9Q' freq=2457 MHz)
wlan0: Association request to the driver failed
wlan0: Associated with 00:24:17:f1:6c:bf
wlan0: CTRL-EVENT-DISCONNECTED bssid=00:24:17:f1:6c:bf reason=0
wlan0: Trying to associate with 00:24:17:f1:6c:bf (SSID='BTHomeHub2-4P9Q' freq=2457 MHz)
wlan0: Association request to the driver failed
wlan0: Associated with 00:24:17:f1:6c:bf
wlan0: CTRL-EVENT-DISCONNECTED bssid=00:24:17:f1:6c:bf reason=0
wlan0: Trying to associate with 00:24:17:f1:6c:bf (SSID='BTHomeHub2-4P9Q' freq=2457 MHz)
wlan0: Association request to the driver failed
wlan0: Associated with 00:24:17:f1:6c:bf
wlan0: CTRL-EVENT-DISCONNECTED bssid=00:24:17:f1:6c:bf reason=0
wlan0: Trying to associate with 00:24:17:f1:6c:bf (SSID='BTHomeHub2-4P9Q' freq=2457 MHz)
wlan0: Association request to the driver failed
wlan0: Associated with 00:24:17:f1:6c:bf
wlan0: CTRL-EVENT-DISCONNECTED bssid=00:24:17:f1:6c:bf reason=0
wlan0: CTRL-EVENT-TERMINATING - signal 2 received -
Why does my wifi connection keep dropping in and out?
I have Samsung Galaxy Note 2. The wifi is connected to the wireless router and is the only pc of equipment that is. Full bars. Yet the note keeps dropping the wifi saying it has authenticity errors? My previous cell had absolutely no issues. And its a new router.
I regret to learn of the issues, funeralguy77! Lets figure it out together. Can you try to connect another device to the same WiFi connection. Does it connect? Have you tried to delete/forget the connection and trying again?
Please share additional details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Can you get your previously purchased ringtones from itunes back when you switch to a new device?
-
Windows 2008r2 cluster dns issue
We are running GW 8.0.2 not hot patches. System is running on a windows 2008r2 2 node cluster. When we failover the gwia from node 1 to node 2 we can no longer send email to the internet. We receive just fine, also imap and pop connections are workin
-
Connection not closed in the database server end
Hi, Our database server (sql server 2000) and java application are running in two different boxes. Because the java application sent to the db server quite a few queries that can not be completed (applications hangs there) due to huge amount of data
-
Buying a notebook. Is any one brand better for Photoshop?
I am going on a scuba diving trip and plan to buy a lightweight notebook. I plan to install PS software. Is any particular brand better than the others?
-
My computer won't detect my iphone
It used to,but I don't know what happened that it doesn't any more. I can charge my phone via USB but the computer can't detect it. It's the latest iTunes and I already tried restarting phone and computer and reinstalling iTunes.