Why does my ipad have imessage on it but my sisters does?

m yipad doesnt have imessage on it when i first got it and i dont know why

IMessage is specific to iOS 5 and later operating systems!

Similar Messages

HT4623 WHY IS MY IPAD HAVE A PASSCODE AFTER I UPDATED THE NEW VERSION?

why is my ipad have a passcode after updating new version?

If you can't remember the passcode:
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...

Why doesnt my ipad have sound if though mute is off and version 6.1.3

Why doesnt my ipad have sound if even though mute is off please help

It is very possible that your mute is off, but your volume is still all the way down. Try turning up the volume with the side buttons.
If that doesn't work, make sure that the app you are trying to use sound in doesn't have an additional mute option.
If that doesn't work, it is possible that the problem lies within the iPad itself, inside the casing. I suggest going to the genius bar to have it looked at.

Why is my iPad freezing iMessage after I have watched a video? Nothing happens when I touch "done". Any ideas?

Why does my iMessage freeze when I press "done" when I am done watching a video? I can't get back to messaging

Turns out once I shut down the iPad and turned it back on my issues were resolved.
Thank you

Why Cisco dosn't have AP MIMO 3x3 but only 3x2?

More player has a portfolio APs MIMO 3x3? Why Cisco no has APs with these caracteristics but only 3x2?
AP 3x2 i very similar in term of perfomance to AP 3x3?
If you should to chose a solution for your company, the MIMO 3x3 funtionality is avery important for the project or MIMO 3x3 and 3x2 is not the same but is very similar?
Redards.
Mirko Severi.

I really can't answer that, maybe one of the Cisco guy's can:), The bottom line is that 802.11N is limited to 300mbps no matter if its a 2x2, 2x3 or 3x3. How I see it from my client side, is how many wifi devices will actually have a 3x3 sytem in it and what gains will they get from a 3x3 vs a 2x3. If you see Cisco come out with a 3x3, you will also see the cost go up for sure. Now what will happen to the power requirements... do you now need to supply more power to actually use the 3x3? If you review the others who have 3x3, you will notice that they mention about the power requirements or else it will drop down to a 2x3 configuration. Would it be nice.... of course, only if you can keep you existing infrastructure and the cost doesn't jump up 100+ dollars per AP. Most of my clients still have non 802.11N devices and I don't see that from going away. Just my opinion:)
Here are some links that compare them:
http://www.networkworld.com/newsletters/wireless/2009/110909wireless2.html
http://www.eetimes.com/design/communications-design/4012601/Optimizing-WLAN-performance-with-MIMO-calls-for-careful-analysis

Why don't i have Imessages

I got my Ipod touch 4th generation from an company named : Finger Hut. The problem is i suppose to have an built in app called : Imessages. I'm wondering is my Ipod touch 4th generation suppose to be like this or not. I would really like to get this app so i would like to ask you what should do?

You need iOS 5 for the Messages app. For that you need iTunes 10.5.x on the computer. Update via iTunes. To check the iOS: Settings>General>About>Version

Why doesnt the ipad have a camera?

i strongly think that the ipad should have a camera for maximum social networking capabilities and sharing moments.

Thanks for your personal opinion.
Maybe wait for the next iPad.
I think Apple has intentionally left it out because it would be as silly as putting a phone in the iPad. Imagine someone holding a nine inch iPhone to their ear. The same goes for holding a nine inch tablet to take a photo + any camera put in a iPad would lead to many complaints and people complaining about picture quality. The price would also go up. As for a front facing camera I can see use but currently the speeds would not be adequate on 3g and it would also ruin Apple’s one more thing.. thing (iPhone-FaceTime) I think they are letting features go slowly until Apple finds what people use their iPad for then they will decide what needs to be added. Generally the first product is more like a beta. Apple is going slow and steady to make the WOW people have with the product last. If they gave all the features go at once what would be in the next iPad. I do think they have unintentionally let people get their hopes up too high leading to some disappointment (which is the other extreme). Anyway hope I answered your question

Why the receiving party received iMessage from me but displayed as sent from email address

When sending SMS through iMessage, why is it that the receiving party received the SMS as being sent from my email address instead of my mobile number

I have iPhone 4 iOS 5.1; I've been trying figure out how to make it so iMessage sends from my phone number and this is what finally worked for me:
First, I went to Settings>>Messages>>Receive At
Then, from there I logged out of the apple id by tapping on my email address and selecting "Sign Out." Now, in the place of where my email address was is the text "Use your Apple ID for iMessage." From here, I returned to "Messages," and next to "Receive At" my phone number was displayed.
After following these steps I am able to send messages from my phone number, instead of from the email address associated with my apple id.
The following things did not work for me:
I have tried signing out from my apple ID via Settings>>Store but this did not work. I have tried setting my Caller ID as my number, but this didn't do anything (i.e. iMessages were still being sent via my email address). I have tried changing the aforementioned items and restarting my iPhone in various ways. The only thing that worked is what I mentioned above.

Why do some next generation ipads have a lightning connector and some the old connector

why do some ipads have a lightning connector and some the old connector

Apple said that the lightning connector takes less space than the 30-pin connector.
 Cheers; Tom

Why does my Cisco router firewall block Windows Server 2012 traffic, but not Windows Server 2008 traffic?

Hello,
   I run a small business network with five physical servers: three Dell servers running Windows Server 2008 R2, one custom build running 2008, and another custom build running 2012 with Domain Controller Role (same hardware for both custom builds).
The Dell servers are all running the Hyper-V role and each has a number of 2008 VMs. I also have a 2012 VM with the Domain Controller Role on one of the Hyper-V servers and another VM with a completely base install of 2012.
   All servers are plugged into a Cisco SG300-52 switch which is uplinked to a Cisco 881 router which is connected to a cable TWC provided Ubee cable modem. I have no VLANs setup. I do have the Firewall on the router configured
to inspect most traffic.
   Here is my problem: I cannot connect to most of the internet on ANY 2012 server (and all exhibit the exact same behavior), but I have NO problems connecting to the internet from 2008 servers. Here is what I already know:
   1.) I can ping the outside world just fine so ICMP is passing to any external host.
   2.) Two of the 2012 servers are DCs running DNS services and they can connect to the internet just fine for DNS requests because they are doing a perfectly good job of providing DNS services to my network.
   3.) Here's where it gets really weird: I can browse in internet explorer to Bing.com and it works. I can also go to a couple other Microsoft websites (though they are very slow). If I click on any link in Bing, however, it doesn't
work and gives me a page not available error. If I connect to a non-MS website like Google or my company website, I get page not available.
    4.) I have tried to telnet to port 80 at Bing and it works. I have tried to telnet to port 80 at google.com and it won't connect. The 2008 servers have no issue telneting to either bing or google on port 80 and none of my client
PCs on the network do either.
    5.) Windows Update will not connect and neither will any other update service such as AVG (I have AVG Antivirus installed WITHOUT firewall on two of the three servers. The base 2012 VM has no software installed and no roles...I built it
just to see if it could connect after a fresh install and it still cannot.)
    6.) The network connection does not indicate limited connectivity (probably because ICMP appears to be passing successfully)
     7.) If I connect the server directly to the modem it has full internet access.
     8.) All internal LAN connectivity is perfectly fine and runs at full speed.
     9.) I have scoured the internet trying to find other examples of this particular kind of connectivity issue on 2012 and I have found two TechNet articles that are similar, but they both had the same resolution: changing the router
worked, but no one knows why. (I would have included the links, but apparently I cannot do that yet)
My question is this: What is different about Windows Server 2012 networking that would render it unable to communicate through a router that Windows Server 2008 has no problems with? I ask because, unlike in these two articles where they were
running personal networking equipment they could easily upgrade, I'm running a Cisco 881 with what should be virtually limitless configuration options and I have no desire to replace it. I have to assume the issue is somehow related to the firewall configuration,
which I could fix easily, but I don't know what to change. If anyone knows what changed in 2012 and why I would be able to browse to bing and other MS sites but no where else, please pass them along. Thanks.

This is the IP Config for the 2012 DC:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : COMPANYDC02
   Primary Dns Suffix . . . . . . . : company.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-25-90-DC-EF-D5
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::81d5:53cf:bd07:14ed%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.10.10.202(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.10.10.1
   DHCPv6 IAID . . . . . . . . . . . : 301999504
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-96-D5-C3-00-25-90-DC-EF-D5
   DNS Servers . . . . . . . . . . . : 10.10.10.202
                                       10.10.10.221
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{9929D989-8E88-4096-A1CB-61F1DB173FA3}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
This is the IP Config for the fresh install 2012 VM:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : WIN-800299O7ES6
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . : company.local
   Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
   Physical Address. . . . . . . . . : 00-15-5D-0A-5C-02
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.10.10.49(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Saturday, August 23, 2014 10:23:01 PM
   Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 10:23:01 PM
   Default Gateway . . . . . . . . . : 10.10.10.1
   DHCP Server . . . . . . . . . . . : 10.10.10.1
   DNS Servers . . . . . . . . . . . : 10.10.10.220
                                       10.10.10.221
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.company.local:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : company.local
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
NOTE: 10.10.10.220 and 10.10.10.221 are the other domain controllers on my network. One of them is 2012 and one of them is 2008. They are both functioning correctly for providing DNS services. The 2012 Virtual DC, however, still has
the internet connectivity issue that this whole post was about in the first place.
NOTE2: When I logged on to COMPANYDC02 this morning, it told me that I had new Windows Updates that needed to be downloaded.   Confused, I checked the most recent time WU had checked for updates at it had successfully checked for updates last night
at 10pm. Of course, it failed when trying to download them, but it appears that once in a while, a connection gets through successfully...

TS4268 My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

Look at no. 5 in this text which was copied from Apple's support site for troubleshooting Messages and FaceTime activation.
Troubleshooting Apple ID activation
After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that you have an active Internet connection. You can complete activation using Wi-Fi or a cellular data connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location.
This is the support kb article.
http://support.apple.com/kb/ts4268

HT4203 Why does my iPhone4 not have an imessage feature or a software update feature?!

Why does my iPhone4 not have an imessage feature or a software update? Really frustrating when I can't even download a Facebook app? Seriously guys ice up your game!

The incredible ranga wrote:
Why does my iPhone4 not have an imessage feature or a software update? ...
Those are features of iOS 5 or later... You have iOS 4...
You need to Update your Device...
See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

I don't have imessage on my iPad. Why not?

I noticed that my mother's iPad has the "imessage" application, but I don't have it. Does anyone know why not?

You Have to update your iPad to ios 5!!!!

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

HT4623 why does my ipad kick me out of FB and sometimes to the 'settings' page or sometimes to the desk top, for what reason? I have 50.8 GB of capacity available; it is version 5.1.1 and model MC497LL. it is WIFI and internet via AT&T??? Can you h

Can anyone help me? Why does my ipad kick me out of FB? Sometimes to the 'settings' page and sometimes to the desk top? I would like to know why this happens and what I can check or change to make it stop. I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL. It is WIFI and internet via AT&T? Can anyone give me some clues on what to do; or change in settings??? Thank you very much!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does my ipad have imessage on it but my sisters does?

Similar Messages

Maybe you are looking for