Why does my iPad limit me to 5 minutes before auto-lock?
My iPad multi-lock menu only offers 1 minute and 5 minutes as options for timing. Same for pass code. Why is that, when others have lots more options and even "Never"?
Did your iPad come from work or school? If it's administered by others then they have the ability to limit the autolock to protect the data on the ipad
Similar Messages
-
Why does Audition CS6 limit me to 3 minute recording sessions?
Recently, Audition has limited my recording times to only 3 minutes and I have no idea where to change that restriction.
I am running Audition CS6 on an iMac with Mountain Lion, trying to record to a mono-audio track.
Can anyone offer a solution to my problem, please?I'm guessing slightly, but t's just possible that your default session has been saved to one with only three minutes of time in it.Try opening a new session using a different template and see if the same thing happens - if this fixes it, you need to redo your default session to one without this limit!
-
Why does my iPad Air takes a long time to charge?
Why does my iPad Air takes a long time to charge?
You need to provide more detail. What do you mean by "a long time?" Are you charging it plugged into a wall socket?
Barry -
Can anyone help me? Why does my ipad kick me out of FB? Sometimes to the 'settings' page and sometimes to the desk top? I would like to know why this happens and what I can check or change to make it stop. I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL. It is WIFI and internet via AT&T? Can anyone give me some clues on what to do; or change in settings??? Thank you very much!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Why does the iPad Mini not have music play count?
I bought an iPad Mini and also have a macbook. I had listened to various music on my iPad Mini the other day, however when I connected the iPad Mini to the Macbook and iTunes via the lightning connector to sync, it synced the ratings I gave the songs I listened to on the mini, but no play count, as if I had not listened to anything. I hope there is something I can do about this as I often look at my play count!!
Katrina UK
It should work work but these kind of bugs pop up between updates, both hardware and software. Try closing all apps in the recently used list on the iPad. Double tap the Home button, tap and hold one of the icons at the bottom till they wiggle then tap the to close them. Tap the Home button to get back to the Home screen then hold the sleep button till you see the slide to power off message. Once it has powered down completely hold the Sleep button till the Apple icon appears.
tomyiiii
Re: Why does the iPad Mini not have music play count?
Nov 18, 2012 11:34 AM (in response to Katrina UK)
Does it even really matter...?
Many people including myself rely on playcounts to control smart playlist to manage large libraries. Smart playlists can be created to show your most or least played tracks and used more or less as your favorites or other uses. Along with playcounts the date is transferred so to keep a fresh list of music on my smaller iPods a smart playlist set to songs not played in the last month keeps some fresh tunes on it.
Playcounts are also used to manage Podcasts in iTunes to delete older episode. Bookmarks, which can also be effected by this, can mess up audiobooks, movies and podcast playback between different devices. So yes, it does matter. -
Why does my iPad keep kicking off my wifi and then it is very hard to connect back ? Is ther a setting I don't have set right. I am not real familiar with a lot of technical
We are fellow users here on these forums, you're not talking to iTunes Support. You say that you used the pack that you bought and that it then ran out - does that mean that you used it all up ? If you didn't use it all up but your game lost the purchase then you can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Why does Apple iPad Camera Connection Kit no longer work with iOS8
Why does Apple iPad Camera Connection Kit no longer work with iOS8?
The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised -
Why does my iPad no longer display email messages?
My iPad suddenly stopped showing the body of emails, both for my iCloud account and for my Google mail account. I discovered that if I click to either reply or forward a message a truncated version of it appears with no attachments or graphics. I didn't change any settings or anything before it happened. What do I do to get the body of email messages to show up again?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Why does my ipad and appleTv work badly with youtube ?
Why does my ipad an apple tv work so badly with youtube, its frozen all the thime
Make sure the wifi signal is strong enough as the iPad uses twice the normal bandwidth (receiving youtube video and sending it to the Apple TV).
if it isn't strong enough, try to move your wifi router closer to the Apple TV room or get an additional router. -
Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2
If you are not using Cellular Data, turn it off.
-
Why does my iPad 1 not open documents from my updated mac-pro laptop pages since i updated the mac. Have updated latest pages for iPad 1 it could and still not able to open docs as i could before update on mac-pro
The most recent version of Pages that you can run on the iPad 1, running iOS 5.1.1, is not compaible with the newest version of pages on the Mac.
If you had the old version of Pages on your Mac, and off hand I can't remember what version it was, you should still be able to use that version and then it will be compatible with the Pages app on the iPad. I updated to the newest version of Pages some time back but was able to keep the older version as well. -
TS1398 Why does my ipad keep saying poor connection on FaceTime ever since ios6
Why does my ipad keep saying poor connection on FaceTime since we went on ios6
I have the same problem with my ipad 2.. ever since i updated to ios 6 it says "connecting" and never connects..and then 5 mins later it says "connection lost" CALL BACK! its so frustrating as i have not had any issue before the update..
both me and the end caller have updated to ios 6, so im afraid the above response doesnt work for me! Some one please help, as its driving me nuts to not able to facetime! -
Why does my iPad keep losing the wifi every few minutes?
Why does my iPad keep losing the wireless connection every few minutes?
Could be
1 the routers firmware require an Update
2 the iPad is defect -
Why does my iPad keep losing connectivity
Why does my iPad
keep losing connectivity ?Hi Joan,
I'm sorry to hear you are having issues connecting with Wi-Fi from your iPad.
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iOS: Troubleshooting Wi-Fi networks and connections
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap the blue dot and choose Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
If your issue is still unresolved
Follow the steps below for the issue you are experiencing.
Unable to locate a Wi-Fi network
Unable to connect to a Wi-Fi network
Wi-Fi disconnects, or signal strength is less than expected
Unable to access the Internet while connected to Wi-Fi
Unable to automatically connect to Wi-Fi
I hope this information helps ....
Have a great day!
- Judy -
Why does my iPad disconnect from wi-fi?
why does my iPad intermitently disconnect from my home wireless network?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
WRT54GS-Wireless devices either won't connect or disconnect when a game is launched
My old router went out last night, and I had a wrt54gs that was given to me a while back, so I hooked it up, but I am having some issues with it. For a while it would say that it had no internet access, when it was connected. Then I couldn't get my w
-
Windows 7 with HP DesignJet 4000ps and print .PLT files
I have a bit of an interesting problem. Our HP Designjet 4000ps is connected to the network and accessible either through a windows print server, or directly via IP address. To print our CAD .plt files, for years I've simply added an action to the .
-
Getting table script using dbms_metadata.get_ddl, but with clob field
So, Oracle 11g R2.. I'm using dbms_metadata.get_ddl to get table scripts and it's working fine.. now, I have a table with clob field, and it's not working... I got an 'missing right parenthesis (ora-0907)' error... I could paste a script that I got,
-
i have a crack in the back part of the macbook screen in the plastic and it is not caused by me it just cracked over time i was wondering if that would be covered in the $250 extra applecare warrenty?
-
COPA Report - Input Selection Fields dynamically not derived in COPA Report
Dear Friends, Please send your valuable inputs for the below issue. Client needs the COPA Input parametres ( Period/Year) to be dynamically displayed in the respective column of the COPA Output Report I have configured in KE35 , in the Column of the