Why does my iPad lose the network I'm on when it goes to sleep?

I Just moved in with someone and I have to manually join the network every time I turn my iPad on. Now all of a sudden, every time my iPad goes to sleep it loses the connection all together. I've already tried resetting the network and also location in the settings. Any other ideas?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Why does my iPad lose the Internet connection ?

    Why won't my iPad battery recharge?  Sent this message before & would

    I didn't do the most recent upgrade as I had problems with it when I did the previous one.  I have the  IPAD WI-FI 32GB .  It seems to be charging ok .  I did a Sync yesterday and now it won't connect to the Internet although it was working fine last evening and I didn't change any settings. 
    When I plug it in to my iMac, the iPhoto applicaiton opens and I have to open the iTunes application even though I have it set to open when I connect the iPad. 
    Appreciate any help or suggestions you can offer.  Thank you in advance.

  • Why does my ipad show the usb cord and itunes?

    why does my ipad show the usb cord and itunes?

    It needs to be Connected to iTunes on your Computer.

  • Why does my iPad settings,about show I have photos when my photo app says I have none?

    Why does my iPad settings,about show I have photos when my photo app says I have none?

    After the most recent iOS update there is a problem with phantom photos.
    Perhaps you have phantom photos, that are invisible in the Recently Deleted album and thus cannot be deleted. Then resetting the date will help.  Changing the date makes the invisible photos in "Recently deleted" visible again:
    txforeverMar 5, 2015 6:38 PM Re: More photos in settings than photos app shows
    Re: More photos in settings than photos app showsin response to morganfaith6 | This helped me
    I managed to get rid of the phantom usage. Restoring iPhone and resetting the phone settings/data do not work for me.
    I had to move the Date on my phone earlier by 1,2,3 months and found the phantom photos in the Recently Deleted Folder. Next, I deleted the photos manually from the Recently Deleted Folder and the usage got freed up from my iPhone.

  • After recent update to airport on iMac, the wifi connection is lost when it goes to sleep and requires turning off wifi and turning it on to reestablish contact.

    After recent update to OS on iMac, communication to airport is lost when computer goes to sleep.  To reestablish connection, I need to turn wifi off then on. 

    same problem here.
    i have a time capsule.
    symptoms:
    excessively searching for network
    but more often than not, it cant find the correct netowrk that is correctly stored in keychain
    if i try network assistant opened through safari not finding its page, then it can find the right network after i enter in the password again.  it connects. but only for a few seconds then it loses the connection again.
    the only fool proof workaround for me is:
    1/ shut down time capsule. restart time capsule.
    2/ restart mac with airport turned off.
    3/ after restart manually select the network from the wireless icon in the menu bar
    airport utility is a complete waste of time
    old airport utility is still better.

  • Lose AE connected printer on MacBook when G4 goes to sleep

    I have a HP PSC750 connected to my AE, which I set-up on my G4 desktop. Everything works fine until the G4 goes to sleep. When it goes to sleep I lose the printer availability on my MacBook.

    Hello TuAnhLe,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Best of luck,
    Mario

  • Why does Airport card lose AX network connection intermittently??

    I'll be working, and then abruptly the Airport card in my iMac G4 loses the AX connection to the Apple network, and can't find any network. My iBook picks it up fine. Then, maybe within a half hour or so, it suddenly finds the AX Apple network again. All the while my iBook is fine. The only difference between these computers is that the iBook has an Airport Extreme card, and the iMac has an Airport card. And, I'm also in the same room as the AX station. iStumbler appears to show a loss of signal when this occurs, but that doesn't explain the iBook working fine.
    I looked in the AP mgmt utility, and saw this:
    "Deauthenticated with station (iMac mac address) (inactivity)."
    And then:
    "Deauthenticated with station (iMac mac address) (received invalid class-3 frame)."
    What is the problem here??
    Config: Cable Modem > Belkin F5d7230-4 router > ethernet to AX > wireless to computers
    iBook G4 / iMac G4 / iPod 20GB   Mac OS X (10.4.7)  
    iBook G4 / iMac G4 / iPod 20GB   Mac OS X (10.4.7)  

    I'm looking into that possibility.......have a cordless phone in the office, a PC, cell phones, etc. Will clear them out and recheck. The maddening thing is that the iBook is totally bulletproof even in that environment. Why would the iMac be having these issues, but not the iBook? Is Airport Extreme more robust, or that much better than Airport?
    Even now, the iMac shows no network - yet I'm writing this on the iBook right next to it, and it's had no network interruption whatsoever.
    Do you have any knowledge of those "error" notations from the syslog? Could they be pointing to anything else?
    Thanks much.....

  • Why does my iphone lose its network connection

    Have a new iphone and a wireless network at home.  The phone connects to the network ok, but as I move around the house it loses its connection.  When attempts are made to reconnect the iphone replies "incorrect password", despite the fact that the password was stored from the previous connection.  Attempts to reenter the password do not help.  So far the only thing that allows a reconnect is to completely reset the network settings on the iphone, after which it connects once but then disconnects again later.  The issue may be related to the fact that there are two wireless routers in the house and the disconnections may be related to moving from the domain of one to another.

    Hi Frayyan,
    Welcome to the Support Communities!
    The article below will give you some insight about how to optimize your settings to improve the battery life on your iPhone:
    iPhone: Hardware troubleshooting  
    Battery life seems short
    Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
    Try turning iPhone off and then on again.
    Connect iPhone to iTunes and restore iPhone.
    If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
    When charging iPhone, make sure to leave it charging until it is fully charged.
    Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
    I hope this information helps ....
    Have a great day!
    - Judy

  • Why does my iPad loose the connection to VPN in Stand-By?

    Hey!
    I got a problem with VPN and iOS (on iPad 2). When I connect to a VPN-Server (I tried it with different protocols exept the 'Cisco IPsec'-stuff) and the iPad goes into Stand-By, the iPad looses the connection and I manually have to reactivate it in the menu. I am very sure that this is not a problem of the server (tried also different services). Can I fix the bug myself or do I have to wait for an update?

    Sorry, that's Adobe, not Adoby.
    You can start reading about it here:
    http://www.zdnet.com/blog/perlow/exclusive-adobe-ceases-development-on-mobile-br owser-flash-refocuses-efforts-on-html5-updated/19226

  • Why does Number's include the date and cell title when creating a formula!!

    When typing in a formula, if the 1st column has a date in it then, regardless of where on that row I begin the formula, the date and title of the column appears in the equation rather than the cell designations. What I get is this:
    ='# Shares Bought' 'Apr 4, 2009'*Share ∆ 'Apr 4, 2009'
    All I wanted was =D2*H2, but instead I got all of that. If I manually erase everything and change it to =D2*H2 it reverts back as it was as shown above.
    I tried the same thing without the date in the first column and this eliminated the problem. However, I need the date, so why does Number's insist on doing this?
    Thanks.

    And now, the envelope please. The winner is Jerry Green for his spot-on answer!
    Hey, Jerry!
    I really appreciate your response to this silly little problem. I've used a few spreads in my time, but I've never seen this before. Guess I should have checked the Prefs but didn't. Anyway, I'm good to go now.
    This still, I don't think, explains why the row without the date configured correctly. Does it??
    Again, thanks for your perfect answer.
    Phillip

  • Why does my Mac Pro open to a fuzzy screen when coming out of sleep mode?

    Why does my Mac Pro open to a static-filled screen when coming out of sleep mode?

    But does it then come fully awake? My MB Pro comes on with out of focus screen as if in a fog but once it comes awake it clears up, there is a progress bar at the bottom showing the progress from sleep

  • Why does my iPad lose wireless printer options when my Mac shuts down or sleeps?

    If my Mac sleeps or is shut down, my iPad doesnt' show any ptinter options. Neigher does my wife's iPad. What do we do to enable both iPads to show our wireless printers regardless of our Macs being powered down?

    A shutdown can happen for lots of reasons, but given the history of your device, it's wise to visit your Apple Store. The issue may lie with an improper repair, but it may also be that there's other damage that happened as result of the shattered screen. The RAM may be damaged, as well.
    Back up your data. Perform a soft reset, just in case that works. If not, visit your friendly Apple Store/Genius Bar. And please post with the results.

  • Why does my iPad open the app store whenever an add comes up when I'm on the internet?

    When I'm on my iPad and on the internet whenever a game app add comes up on the side it forcibly takes me to the app store to download the app without me even touching it. I have tried different browsers and they all do it.

    That's because the ad contains JavaScript which activates a URL. That URL causes the App Store to open.
    Avoid those sites which cause this. Complain to their webmasters.
    Using "Settings > Safari > Clear Cookies and Data" may help.

  • Why does my ipad lose 20% battery overnight

    i lose large amounts of battery every night... in airplane mode. all apps closed...please help.

    There are some tips on maximising battery life on this page www.apple.com/batteries/ipad.html

  • Why does my trackpad lose the cursor?

    Frequently, my cursor becomes frozen.  I do a quick on/off on the power button and the trackpad gets control over the cursor again.  I swapped out the trackpad with another, but the problem continues. Anybody else experience this problem?  This is happening on my wife's iMac running Maverick.

    Try this:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

Maybe you are looking for

  • Problem: Optical audio out

    I just received an iCable from Monster Cable today. I connected it from optical out (imac) to optical in (av receiver). Thing is my computer saying it can not detect the device; "The device selected has no output controls" Not sure what that means. H

  • Extending 0BP_DEF_ADDRESS_ATTR to Extract Mobile Phone number

    I'm currently attempting to extend the 0BP_DEF_ADDRESS_ATTR to include the business partners mobile number. We have appended a "Z" field to the extract structure & are now trying to fill it from table ADR2, where r3_user = 3 If anyone has already don

  • HTML format only for websites, mountain lion

    I recently upgraded my girlfriends MacBook Pro 13 inch Early 2011 to mountain lion. Upon the update, everything works except the browsers and the app store. No thumbnails or icons of any sort can be displayed. Websites are displayed in HTML. And when

  • IMovie HD keeps crashing on opening project (previous imovie

    Hi. I have a project I put a TON of time into, using iMovie 3.03. Then I put it on hold because I knew I'd be upgrading to iMovie HD. Well, low and behold, it isn't working. I open the project and it asks to upgrade it, which will make it 'unreadable

  • HELP... Refresh or selectone's. Release tomorrow......

    Hello I have a form with several panelforms inside. Each of the panel forms is displayed by a rendered=#{bean.position==1} or 2 or 3 and so on. The position value is set by a set of buttons. This works well. All the input text fields are displayed co