Why does my ipad not work when powered up and screen just lights up dark blue?

IPad Model A1219 does not respond when powered up, screen barely lights up just a dark blue screen thats it. will not do anything else, why?

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

Similar Messages

  • HT4993 why does my internet not work when not connected to wifi?

    why does my internet not work when not connected to wifi

    Hi farmgirl0812,
    Thanks for using Apple Support Communities.  This article has steps to try if you are unable to connect to a cellular network:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Ari

  • Why does the alarm not work when the iphone 4 is turned off

    why does the alarm not work when the iphone 4 for is  turned  off works fine when on most other phones work when off

    The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

  • Why does the mail not work when i updated my 5s to iOs 8?

    why does the mail not work when i updated my 5s to iOs 8?

    Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

  • Why does the swiping not work to scroll down the screen

    why does the swiping not work to scroll down the screen or swipe from side to side

    Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

  • Why does my ipad not work properly when charging

    when my ipad is plugged to charger it does not work properly  goes crazy

    Not sure what 'goes crazy' means but it most likely should not do that.  Try a reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Also try it plugged into another outlet (on another circuit) and/or try another charger.

  • Why does my .vi not work when used as a sub vi

    I have a vi that produces a picture on the front panel. Displayed in the picture are solid grey levels for testing. Two grey levels are chosen inside the vi and then the picture flickers betwen the two. When I run the vi by itself it runs wonderfully, but when I run it as a sub vi it does not work. Even when I just place the sub vi in the block diagram and connect all of the controls and indicators up it doesn't work.When I use the highlighter it shows that the control values go into the sub vi and the sub vi lights up, but there is nothing output from the sub vi to the wired indicators. When I open up the Block diagram of the original vi from which the sub vi came, and highlight it while running the subvi, it
    shows that it is working with information running to all of the indicators. If I start a new program with only the sub vi in the block diagram and all of the controls and indicators connected, should it not behave as the sub vi? I will attach the vi that I am using as a sub vi, and I welcome anyone to place it in the block diagram of a new vi, connect all of the controls and indicators up and see if it works. I know that there is something completely obviopus that I am missing, but I can't see it. Any help would be greatly appreciated.
    Attachments:
    GL_Flicker.vi ‏74 KB

    I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
    Attachments:
    Pass_a_Reference.vi ‏11 KB
    GL_Flicker_mod.vi ‏66 KB

  • Why does diadem intellisense not work when using scriptinclude or for global object

    I have a script with a different classes in it (scripted 1).  When I create an object of a class in the script 1 intellisense works.  Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object.  But when I write another script and use scriptinclude(scripted 1) the intellisense does not work.  I also tried a global object and intesllisense does not work.  Is there a way to get intellisense to work when using scriptinclude?  I am working with version 2012. 

    Here is more information on the issue.
    I have a script with a different classes in it (scripted 1).  When I create an object of a class in the script 1 intellisense works.  Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object.  But when I write another script and use scriptinclude(scripted 1) the intellisense does not work.  I also tried a global object and intesllisense does not work.  Is there a way to get intellisense to work when using scriptinclude?  I am working with version 2012. 
    'Test.vbs
    class test
        public function test1()
             msgbox("test1")
        end function
        public function test2()
             msgbox("test2")
        end function
    end class
    'now create a object of the class
    dim oTest
    set oTest=new Test
    'now when you type oTest. you get the following functions to choose from
    oTest.test1
            .test2
    Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
    'Main.vbs
    Option Explicit  'Forces the explicit declaration of all the variables in a script.
    call scriptinclude("c:\1atmp\Test.vbs")
    dim oTest
    set oTest=new test
    'now when you type oTest. it shows none of the functions in the object oTest
    oTest.

  • Why does the iPad not come with Stocks, Weather and Messages apps like iPhone?

    Just received my new 64gb iPad and curious about why Apple has left some of the key apps off the device like Stocks, Weather and Messages. Can these be added?
    All the iOS 5 demos I've seen were showing the new Notifications functionality with these apps being used as examples yet when I turned this amazing device on, none of these apps were there.
    Someone clue me in to what I might be missing here.
    Thanks,
    Steve

    After I posted my question, I saw many similar questions with the same answers. Thanks for the help. Seems strange to me to not include these great apps and I totally forgot about the Clock & Calculator...
    I wonder if iOS 5 might return add them to the iPad?
    Cheers,
    Steve

  • Why does my cursor not work when hovering in certain sites?

    My cursor does not bring up information when i hover in sites like appointment plus. I use safari, when i downloaded firefox and signed on the cursor worked, is there something i am missing? I prefer safari, but will switch to firefox if i have to.
    At my office i have an old mac with snow leopard and the cursor works on that while on safari. my home computer has lion and it doesn't work

    Your Mac sends traffic to the interface at the top of the list in
    System Preferences > Network
    When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
    The solution is to cable that Printer to your Router, not to your Mac.
    Alternatively, you could add a small Switch and connect your Mac and the printer to it.
    If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

  • Why does this script not work when run with osascript cli?

    I wrote the following to interface with geektool to display a list of todo's on my desktop (i'm sure it's been done elsewhere, but I wanted to try it myself). I had it working fine until I tried ordering the output to place the highest priority items at the top of the list. The following code works properly during development in Script Editor, but when geektool launches the command using osascript ~/Library/Scripts/todos.scpt it only displays the initial "TODOS:" without displaying the rest of the info. Searching the Applescript Release notes, I found that some versions of Applescript 1.8 had issues with null characters when using the osascript cli, however, I'm running 1.10.7 so it shouldn't be an issue (and I'm not sure how to check for null characters in Applescript even if it were). Anybody have any ideas on what's going on here?
    set output to {"TODOS:
    set highpri to {}
    set medium to {}
    set low to {}
    set nada to {}
    tell application "iCal"
    repeat with i in calendars
    repeat with j in todos of i
    if (completion date of j as string) is equal to "" then
    if priority of j as string is equal to "high priority" then
    copy summary of j & "
    " to end of highpri
    end if
    if priority of j as string is equal to "medium priority" then
    copy summary of j & "
    " to end of medium
    end if
    if priority of j as string is equal to "low priority" then
    copy summary of j & "
    " to end of low
    end if
    if priority of j as string is equal to "no priority" then
    copy summary of j & "
    " to end of nada
    end if
    end if
    end repeat
    end repeat
    end tell
    return (output & highpri & medium & low & nada) as string

    well, i'd been pulling my hair out for quite a while with this and decided it was time to ask for help, but I thought I'd give it one last shot and found a resolution almost immediately. I figured that problem had to be caused by the way applescript was concatenating the lists, so I got rid of the lists completely and it still wouldn't work. This convinced me that it must be newline related since that was the only special character left in the string. I opened up the script in vi, but the default compiled script format is not human readable. The osascript man page indicated that it would accept both compiled and text scripts, so I gave it a try, and osascript handled the raw text file wonderfully.

  • Why does my printer not work when i plug in the internet? (ethernet)

    hey guys,
    i have the Mac connected to a large digital printer via the ethernet connection. works fine, no problems untill i plug in the internet. I get an error message in my software and can't print any jobs, but the internet works fine.
    I have a feeling that its a network problem, but don't want to mess around too much with the settings.
    This is a company internet connection.
    if anyone could advise of the possible network settings, I would be very greatful.
    thanks again.

    Your Mac sends traffic to the interface at the top of the list in
    System Preferences > Network
    When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
    The solution is to cable that Printer to your Router, not to your Mac.
    Alternatively, you could add a small Switch and connect your Mac and the printer to it.
    If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

  • Why does my ipod not work when i plug it into the wall and work when i plug it into my computer?

    hello?

    What do you mean by works?  Do you mean the battery chares on the computr but not with the wall charger?
    Did the wall charger ever charge the iPod?

  • Why does the ipad not have the apps wheather and stocks

    The iPad doesn't have stocks and weather

    All we, your fellow users, can tell you is that it's because Apple chose not to include them. There are a multitude of such apps in the iTunes Store, though.
    Regards.

  • Why does home-sharing not work with Windows-PC and iMac?

    Aber mit gleichem Windows-PC und MacBookPro doch? Alles im selben Neztwerk. Der PC erscheint beim iMac einfach nicht unter Freigaben. Der iMac erscheint zwar beim PC unter Freigaben, aber wenn man auf die Mediathek des iMac in der PC-Anzeige klickt, erscheint der bunte Drehball und nach einer Weile ist die Anzeige des iMac in der Rubrik Freigabe beim PC nicht mehr da. Erst nach Neustart des PC erscheint der iMac dort wieder. So nutzt mir das gar nichts. Die Einkäufe werden automatisch auf allen drei Geräten aktualisiert.
    Sämtliche "Hilfen" habe ich durchsucht, aber ohne Erfolg. Es klappt einfach nicht mit der Freigabe.
    Vielleicht ist es ja möglich, eine deutsche Antwort zu bekommen.
    Ich kann mir auch gut vorstellen, dass ein solches Forum in Deutschland gut genutzt würde. Es ist sehr schade, dass es das nicht gibt. Aber vielleicht kommt soetwas ja irgenwann einmal. Jetzt wo auch in Deutschland an jeder Ecke Apple-Produkte zu kaufen sind und keine Exoten mehr darstellen.
    Vielen Dank im voraus.

    First, each Library should have a unique name, not the same name.
    Now, I wrote an extensive how-to in another thread that explains Home Sharing, Library Sharing, how to turn them on and identify them and so on. See if it helps you with your problem.
    https://discussions.apple.com/thread/3461734

Maybe you are looking for