Why does my ipad recharge to much less than 100%

When I recharge my iPad II it recharges to from 65 to 85 % instead of 100%. I wondering why.

Try resetting...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
iPad Charging
"The fastest way to charge your iPad is with the included 10W USB Power Adapter.
iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."
See... http://support.apple.com/kb/HT4060
Ipad Battery About Best Practice
http://www.apple.com/batteries/ipad.html

Similar Messages

Why does the library image look much better than develop image?

I'm noticing a huge difference in IQ even after post processing between the library image and the develop image within Lightroom 2.1 itself. Any reason why? Thanks.

In what way? The Library image is just a rendering of the Develop image. In Develop, the sharpening and noise reduction are only applied at the 1:1 view to speed it up and to not lie to you (which it would if shown at lower magnification).

Why does my iPad calendar lose entries older than 2 months?

Calendar seems to forget things that happened over 2 months ago, exept events in my Outlook calendar. All my personal calendar dates previous to June are blank. Why has this happened and can I change a setting to prevent it?

Settings; Mail, Contacts, Calendar - scroll down to the Sync section under Calendars and you can change the setting

Why does last fetch take so much longer than first three?

I have this trace file:
EXEC #3:c=0,e=4803,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=2726503091,tim=2779072194357
WAIT #3: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=2845769927079
FETCH #3:c=0,e=2969,p=0,cr=56,cu=0,mis=0,r=1,dep=0,og=1,plh=2726503091,tim=2779072197438
WAIT #3: nam='SQL*Net message from client' ela= 1006 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=2845769931224
WAIT #3: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=2845769931269
FETCH #3:c=0,e=322,p=0,cr=2,cu=0,mis=0,r=15,dep=0,og=1,plh=2726503091,tim=2779072198806
WAIT #3: nam='SQL*Net message from client' ela= 3733 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=2845769935348
WAIT #3: nam='SQL*Net message to client' ela= 0 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=2845769935423
FETCH #3:c=0,e=178,p=0,cr=2,cu=0,mis=0,r=15,dep=0,og=1,plh=2726503091,tim=2779072202692
WAIT #3: nam='SQL*Net message from client' ela= 3136 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=2845769938725
WAIT #3: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=2845769938763
FETCH #3:c=410000,e=403256,p=0,cr=7354,cu=0,mis=0,r=13,dep=0,og=1,plh=2726503091,tim=2779072609065
STAT #3 id=1 cnt=44 pid=0 pos=1 obj=0 op='PARTITION RANGE SINGLE PARTITION: KEY KEY (cr=7414 pr=0 pw=0 time=0 us cost=7 size=9823 card=47)'
STAT #3 id=2 cnt=44 pid=1 pos=1 obj=0 op='PARTITION RANGE SINGLE PARTITION:   (cr=7414 pr=0 pw=0 time=0 us cost=7 size=9823 card=47)'
STAT #3 id=3 cnt=44 pid=2 pos=1 obj=590979 op='TABLE ACCESS BY LOCAL INDEX ROWID BA_PGM_SLS_DTL PARTITION: KEY KEY (cr=7414 pr=0 pw=0 time=0 us cost=7 size=9823 card=47)'
STAT #3 id=4 cnt=44 pid=3 pos=1 obj=590982 op='INDEX RANGE SCAN BA_PGM_SLS_DTL_PK PARTITION: KEY KEY (cr=7408 pr=0 pw=0 time=10 us cost=6 size=0 card=1)'
WAIT #3: nam='SQL*Net message from client' ela= 3104 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=2845770355048It looks to me like the first three fetches return 31 rows in very little time, but the last fetch takes about .4 seconds and does about 7354 buffer gets to get the remaining 13 rows. Does anyone have an idea what might cause this?
- Bobby

I goofed. The types of two of the bind variables got reversed:
Wrong type
VARIABLE V_PRIM_CUST_CNTL_LOCN VARCHAR2(10)
VARIABLE V_PRIM_CUST_NBR NUMBER
Right type
VARIABLE V_PRIM_CUST_CNTL_LOCN NUMBER
VARIABLE V_PRIM_CUST_NBR VARCHAR2(10)
Once I fixed this the query reads hardly any blocks at all just as I would expect. I guess the first three fetches got lucky and hit some blocks with matching data. The last fetch must have read through a bunch of index blocks needlessly because it wasn't using all the values in the where clause.
Here are the predicates with the right plan and wrong:
good
   4 - access("BPSD"."PGM_MSTR_NBR"=:V_PGM_MSTR_NBR AND "BPSD"."PGM_SEQ"=:V_PGM_SEQ AND
              "BPSD"."PMT_STS"=:V_PMT_STS AND "BPSD"."PRIM_CUST_CNTL_LOCN"=:V_PRIM_CUST_CNTL_LOCN AND
              "BPSD"."PRIM_CUST_NBR"=:V_PRIM_CUST_NBR AND "BPSD"."DIV_NBR"=:V_DIV_NBR AND
              "BPSD"."CUST_CNTL_LOCN"=:V_CUST_CNTL_LOCN AND "BPSD"."CUST_NBR"=:V_CUST_NBR AND
              "BPSD"."PRCS_DT"=TO_DATE(:V_PRCS_DT,'DD-MON-YYYY') AND "BPSD"."CR_MEMO_NBR"=:V_CR_MEMO_NBR AND
              "BPSD"."INV_NBR"=:V_INV_NBR)
bad
   4 - access("BPSD"."PGM_MSTR_NBR"=:V_PGM_MSTR_NBR AND "BPSD"."PGM_SEQ"=:V_PGM_SEQ AND
              "BPSD"."PMT_STS"=:V_PMT_STS AND "BPSD"."PRIM_CUST_CNTL_LOCN"=TO_NUMBER(:V_PRIM_CUST_CNTL_LOCN) AND
              "BPSD"."DIV_NBR"=:V_DIV_NBR AND "BPSD"."CUST_CNTL_LOCN"=:V_CUST_CNTL_LOCN AND "BPSD"."CUST_NBR"=:V_CUST_NBR AND
              "BPSD"."PRCS_DT"=TO_DATE(:V_PRCS_DT,'DD-MON-YYYY') AND "BPSD"."CR_MEMO_NBR"=:V_CR_MEMO_NBR AND
              "BPSD"."INV_NBR"=:V_INV_NBR)
       filter(("BPSD"."INV_NBR"=:V_INV_NBR AND "BPSD"."CUST_NBR"=:V_CUST_NBR AND
              TO_NUMBER("BPSD"."PRIM_CUST_NBR")=:V_PRIM_CUST_NBR AND "BPSD"."DIV_NBR"=:V_DIV_NBR AND
              "BPSD"."CR_MEMO_NBR"=:V_CR_MEMO_NBR AND "BPSD"."PRCS_DT"=TO_DATE(:V_PRCS_DT,'DD-MON-YYYY') AND
              "BPSD"."CUST_CNTL_LOCN"=:V_CUST_CNTL_LOCN))Having reviewed this I believe this is what Jonathan Lewis meant by a hidden coercion of the data type of one of the columns. The column PRIM_CUST_NBR had to be converted to a number to compare it with the mistyped bind variable and so none of the columns after that one in the index could be used in the range scan.
- Bobby
Edited by: Bobby Durrett on Jul 9, 2012 3:17 PM
Edited by: Bobby Durrett on Jul 10, 2012 8:23 PM

HT4623 why does my ipad kick me out of FB and sometimes to the 'settings' page or sometimes to the desk top, for what reason? I have 50.8 GB of capacity available; it is version 5.1.1 and model MC497LL. it is WIFI and internet via AT&T??? Can you h

Can anyone help me? Why does my ipad kick me out of FB? Sometimes to the 'settings' page and sometimes to the desk top? I would like to know why this happens and what I can check or change to make it stop. I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL. It is WIFI and internet via AT&T? Can anyone give me some clues on what to do; or change in settings??? Thank you very much!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does the iPad Mini not have music play count?

I bought an iPad Mini and also have a macbook. I had listened to various music on my iPad Mini the other day, however when I connected the iPad Mini to the Macbook and iTunes via the lightning connector to sync, it synced the ratings I gave the songs I listened to on the mini, but no play count, as if I had not listened to anything. I hope there is something I can do about this as I often look at my play count!!

Katrina UK
It should work work but these kind of bugs pop up between updates, both hardware and software. Try closing all apps in the recently used list on the iPad. Double tap the Home button, tap and hold one of the icons at the bottom till they wiggle then tap the to close them. Tap the Home button to get back to the Home screen then hold the sleep button till you see the slide to power off message. Once it has powered down completely hold the Sleep button till the Apple icon appears.
tomyiiii
Re: Why does the iPad Mini not have music play count?
Nov 18, 2012 11:34 AM (in response to Katrina UK)
Does it even really matter...?
Many people including myself rely on playcounts to control smart playlist to manage large libraries. Smart playlists can be created to show your most or least played tracks and used more or less as your favorites or other uses. Along with playcounts the date is transferred so to keep a fresh list of music on my smaller iPods a smart playlist set to songs not played in the last month keeps some fresh tunes on it.
Playcounts are also used to manage Podcasts in iTunes to delete older episode. Bookmarks, which can also be effected by this, can mess up audiobooks, movies and podcast playback between different devices. So yes, it does matter.

Why does my iPad keep losing connectivity

Why does my iPad
keep losing connectivity ?

Hi Joan,
I'm sorry to hear you are having issues connecting with Wi-Fi from your iPad.
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iOS: Troubleshooting Wi-Fi networks and connections
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap the blue dot and choose Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
If your issue is still unresolved
Follow the steps below for the issue you are experiencing.
Unable to locate a Wi-Fi network
Unable to connect to a Wi-Fi network
Wi-Fi disconnects, or signal strength is less than expected
Unable to access the Internet while connected to Wi-Fi
Unable to automatically connect to Wi-Fi
I hope this information helps ....
Have a great day!
- Judy

Why does my iPad take forever to charge?

Why does my iPad 2 wi fi take forever to charge?

The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes.
 Cheers, Tom

Why does my iPad not show up in manage storage?

Why does my iPad not show up in manage storage?

Don't understand your question - "manage storage"? What are you trying to do? Are you trying to connect to your computer? Are you trying to free up some storage space?
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

Why does my iPad 2 type random letters?

Why does my iPad 2 type random letters?

It happens when I am trying to write emails, enter username or password info. If a backspace to delete, often other numbers or letters appear. In playing words with friends, the letters I am trying to place end up all over the board--do not go where I want them to. My screens become "shakey" and if I shut down it usually corrects it--but not always. The iPad 2 is less than a year old. Might have to make an appt. at an Apple store unless you have another suggestion. Thanks

Why does my ipad mini keep glitching. We keeps randomly doing stuff on its own while on not even touching it? I've tried restarting it by holding down lock and home button about a thousand times, it never works. so could you please help?? thanks(:

why does my ipad mini keep glitching!! /:

Your iPhone doesn't require as much power to charge as your iPad needs so there is a possibility that the charge could have a problem even though you were able to charge the phone. If you can try a different power adapter and still have no luck, then the only thing left - IMO - is to contact Apple support and see what they advise.
BTW .... Copied from your first post ...
i then decided to do a reset or restore by pressing and holding the home button and the sleep/wake button down.
I'm not trying to be a nitpicker - but what you described is a hard reset and your post gave no indication that you tried a software restore - which I referenced in my post. That's why I suggested the restore.
Many times restoring the iPad to factory settings can help "revive" the device. If you have tried restoring according to the two support articles that I directed you to and still have no success, you are probably out of luck getting any further help on this site. That's all that you can try at this point at least AFAIK.

Why does my iPad Air takes a long time to charge?

Why does my iPad Air takes a long time to charge?

You need to provide more detail. What do you mean by "a long time?" Are you charging it plugged into a wall socket?
Barry

Why does my iPad 2keep kicking me off at my home wifi connection is there a setting to change or reset if you could help me in any way I will appreciate any help you can give me

Why does my iPad keep kicking off my wifi and then it is very hard to connect back ? Is ther a setting I don't have set right. I am not real familiar with a lot of technical

We are fellow users here on these forums, you're not talking to iTunes Support. You say that you used the pack that you bought and that it then ran out - does that mean that you used it all up ? If you didn't use it all up but your game lost the purchase then you can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Why does Apple iPad Camera Connection Kit no longer work with iOS8

Why does Apple iPad Camera Connection Kit no longer work with iOS8?

The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

Why does my iPad no longer display email messages?

My iPad suddenly stopped showing the body of emails, both for my iCloud account and for my Google mail account. I discovered that if I click to either reply or forward a message a truncated version of it appears with no attachments or graphics. I didn't change any settings or anything before it happened. What do I do to get the body of email messages to show up again?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Why does my ipad recharge to much less than 100%

Similar Messages

Maybe you are looking for