Why does my iPad won't hold a charge and charges slowly?
Why does my iPad not hold a charge (about a half hour) and take hours to fully charge?
Charge battery
http://support.apple.com/kb/HT4060
http://www.apple.com/batteries/ipad.html
Similar Messages
-
Why does my iPad Air takes a long time to charge?
Why does my iPad Air takes a long time to charge?
You need to provide more detail. What do you mean by "a long time?" Are you charging it plugged into a wall socket?
Barry -
Why does my IPad 2 keep saying that my icl;oud account user and passwork are not correct but won't let me verify it? I've tried to change my password but it still won't let me verify it!
Why does my IPad 2 keep saying that my icl;oud account user and passwork are not correct but won't let me verify it? I've tried to change my password but it still won't let me verify it!
-
Can anyone help me? Why does my ipad kick me out of FB? Sometimes to the 'settings' page and sometimes to the desk top? I would like to know why this happens and what I can check or change to make it stop. I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL. It is WIFI and internet via AT&T? Can anyone give me some clues on what to do; or change in settings??? Thank you very much!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Why does my ipad say 10.6 gig used and 2.2 available
Why does my ipad air say 10.6 GB used and 2.2 GIG available when its a 16 Gig ipad. Cant figure it out. please help
Out of the box, your iPad only had about 13.5GB of available space.
There are several factors that affect the amount of storage space on an iPad. First is the true amount of space on a hard drive. There is a math difference in how companies spec hard drive size and the true amount of available space. Second the iPad has some pre-installed apps that take up space. My 16GB iPad 2 started out with only 13.5GB of available space.
Why my new iPad’s storage doesn’t add up
http://reviews.cnet.com/8301-31747_7-57404587-243/why-my-new-ipads-storage-doesn t-add-up/
How OS X and iOS report storage capacity
http://support.apple.com/kb/TS2419
Cheers, Tom -
Why does my iPad 1 not hold a charge
For past couple of days ipad1 won't hold it's charge for more than an hour or so, charged it overnight and seemed to be ok but quickly drained. Any advice would be welcome.
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue, i.e. battery. -
Why does my ipad keep flashing the apple symbol and battery symbol
why does my my ipad keep flashing the apple symbol?
Have you tried charging it using the power adapter & cable that came with the device?
-
Why does my iPod touch 4 battery die quick and charge quick?
When i use my ipod the battery dies quickly and as soon as i put it on charge it charges fully in less than 15mins
If you charge for four or more hours how long does a full charge last?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Why does my ipad not work when powered up and screen just lights up dark blue?
IPad Model A1219 does not respond when powered up, screen barely lights up just a dark blue screen thats it. will not do anything else, why?
I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi 11 KB
GL_Flicker_mod.vi 66 KB -
Why does the iPad not come with Stocks, Weather and Messages apps like iPhone?
Just received my new 64gb iPad and curious about why Apple has left some of the key apps off the device like Stocks, Weather and Messages. Can these be added?
All the iOS 5 demos I've seen were showing the new Notifications functionality with these apps being used as examples yet when I turned this amazing device on, none of these apps were there.
Someone clue me in to what I might be missing here.
Thanks,
SteveAfter I posted my question, I saw many similar questions with the same answers. Thanks for the help. Seems strange to me to not include these great apps and I totally forgot about the Clock & Calculator...
I wonder if iOS 5 might return add them to the iPad?
Cheers,
Steve -
Why does the ipad not have the apps wheather and stocks
The iPad doesn't have stocks and weather
All we, your fellow users, can tell you is that it's because Apple chose not to include them. There are a multitude of such apps in the iTunes Store, though.
Regards. -
Why does my ipad wi-fi connection shut down and wont reconnect ?
I purchased an ipad 4 days ago. I set it up with relative ease everything was working well . Two days ago Iost my wi-fi connection. I took two hours getting my wi-fi connection re-established. Lost re-connect almost imediately. I restored the system. Problem continued. Called tech support, Told that what I had done should resolve problem. Since it did not I was told I should take the i pad to the nearest Apple store. This Apple store is 40 minutes from my home. I heed help to solve my problem. Please Help, David Lively
I purchased an ipad 4 days ago. I set it up with relative ease everything was working well . Two days ago Iost my wi-fi connection. I took two hours getting my wi-fi connection re-established. Lost re-connect almost imediately. I restored the system. Problem continued. Called tech support, Told that what I had done should resolve problem. Since it did not I was told I should take the i pad to the nearest Apple store. This Apple store is 40 minutes from my home. I heed help to solve my problem. Please Help, David Lively
-
Why does my iPad keep kicking off my wifi and then it is very hard to connect back ? Is ther a setting I don't have set right. I am not real familiar with a lot of technical
We are fellow users here on these forums, you're not talking to iTunes Support. You say that you used the pack that you bought and that it then ran out - does that mean that you used it all up ? If you didn't use it all up but your game lost the purchase then you can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Why does my iPad take forever to charge?
Why does my iPad 2 wi fi take forever to charge?
The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes.
Cheers, Tom -
why does my ipad mini keep glitching!! /:
Your iPhone doesn't require as much power to charge as your iPad needs so there is a possibility that the charge could have a problem even though you were able to charge the phone. If you can try a different power adapter and still have no luck, then the only thing left - IMO - is to contact Apple support and see what they advise.
BTW .... Copied from your first post ...
i then decided to do a reset or restore by pressing and holding the home button and the sleep/wake button down.
I'm not trying to be a nitpicker - but what you described is a hard reset and your post gave no indication that you tried a software restore - which I referenced in my post. That's why I suggested the restore.
Many times restoring the iPad to factory settings can help "revive" the device. If you have tried restoring according to the two support articles that I directed you to and still have no success, you are probably out of luck getting any further help on this site. That's all that you can try at this point at least AFAIK.
Maybe you are looking for
-
I have Photoshop CS6 and having problems since upgrading to Yosemite 10.10?
It is slower and the lasso tools don't work as well as before
-
Unable SAP Work Directory in Webdynpro ABAP
Hi, I got a requirement to display SAP Work Directory path in Webdynpro ABAP application. So I am using FM - IW_C_GET_SAPWORKDIR to retrieve the path. I can able to execute in SAP GUI but when I try to execute the FM in Webdynro ABAP, its going to th
-
Mail taking a long time to preview files to be attached
I am wondering if anybody can help. Mail is taking ages to preview a file (large or small) before they can be attached. I start seeing the beach ball of death spinning for a long while (> 1 min) before it eventually shows a preview of the file highli
-
How to create a non-accessible script?
I have to develop a script member that contains some procedures and functions. Is there a way to produce some "hidden" script? I think the first solution is to put this script in an external cast and protect it (AKA make it CXT). But... Is there a wa
-
I do not get access to my mail. I am asked for the passwort to my iCloud and mail account, and when I respond with the password I get the message that it is wrong. But I am sure that it is correct.