Why does my iPad2 not get recognized by my PC?

I tried to update to 4.3.2, downloaded it, started to install it on iPad2, now it is not recognized by my computer. WHY?

Was there any error codes when updating the iPhone?
Look into http://support.apple.com/kb/TS1275 for some specific error codes and resolutions.
You may need to put the iPad into Recovery Mode and then restore as new to get it detected on the computer and itunes. Look into http://support.apple.com/kb/HT4097

Similar Messages

  • TS1398 Why does my iPad2 not display the WiFi icon?

    Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.

    Try the following:
    1. Reset the AirPlay devices
    2. Reboot the router
    3. Reboot the iPad
    Note: The AirPlay icon is now in the Control Center

  • Why does my content not get published on my website?

    I published a website with Webmatrix to Azure using the "Download publish profile".  Everything went well and I didn't encounter any errors.  When I went to the azure URL that I created or click on that link, the URL displays the following message:
    This web site has been successfully created
    There's nothing here yet, but Windows Azure makes it simple to publish content with GIT, TFS, FTP or your favorite development tool such as Visual Studio or Webmatrix
    When I click on the Azure Dashboard I notice that under "usage overview" it states under the "File system storage" that I'm using 18.09 MB of the 1024MB limit.  This to me is an indication that the files/content were successfully transferred from Webmatrix
    to Azure, but it did not get published to the URL.
    When I click on the little "?" on Azure, it mentions something about uploading the content with "web deploy", yet there is no icon anywhere on Azure that I can find to upload anything.
    Is there anything that I must do to get my content to show up at the URL or did something went wrong when I downloaded or installed Azure?  Thanks
    PS:  I'm just using the 90 day trail period and have Vista

    Hi Thanks for the reply
    When I go to the link that you supplied, I get the exact same message: Website has been created but there is nothing here.  I have now uploaded 10 sites from Webmatrix to Azure.  All 10 websites uploaded fine and I received a message that it was
    successfully published.  In Azure the status of all the websites are "running", but if you click on the URL, it shows the message above. 
    Also, when I click on the FTP Hostname link for any particular site, it takes me to a login screen.  After logging in I get an Alert "530 user cannot log in"
    Also, is there a way to access the Wordpress root files such as wp-content from anywhere?  Thanks

  • Why does my avi file get recognized on my windows 7 pc and not my 8.1?

    I have a windows 7 laptop that I've been working on a premiere file with, with one of the files included is an avi. I haven't had any issues. But I tried to open the same file on my surface tablet with 8.1, and got an error saying that the file is either damaged or unsupported. I can pretty much guarantee that the file isn't bad, so is there any way to get the tablet to recognize the avi format?

    The avi is probably carrying a codec which is not installed on your machine with 8.1.
    To see which codec is inside:
    MediaInfo Windows
    May need to post a screenshot.

  • Why is my nook not getting recognized?

    I just got a book from First to Read and I went to transfer it to my Nook.  I can't get my nook to show on adobe digital.  It's the newest edition.  I have transferred books before so I am not sure what the issue is.  I have restarted my computer and I have taken all the steps I could find with a google search.
    Thanks so much for your help!
    Jessie

    Joyjester15 wrote:
    I cannot find my scanner on either my HP laptop or HP Printer.  Does anyoknow why?
    Hi,
    It may not have scan function at all. What is it ? Is this post a spam ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why does the collision not get removed?

    Hi I am trying to remove a lock when the player collects an object. I am using removeChild(Lock); which does indeed remove the lock however, the collision for the lock which would send the player to the lose screen is still there despite the object being removed. Does anyone know why this is and how I would go about removing the collision.
    This is the basic collision I use
       this.addEventListener( Event.ENTER_FRAME, handleCollision)
       function handleCollision( e:Event ):void{
    and here it is being used with my lock
    if(Flary.hitTestObject( Lock )){
          if(lvlStart == true){
       lvlTimer.reset(); 
       gotoAndStop(3);
       lvlStart = false;

    THen you should check to see if Lock is a child as part of the conditional so that it doesn't pass if it has been removed as a child....
    if(this.contains(Lock) && Flary.hitTestObject( Lock )){

  • Why does a user not get an invite?

    I have twice requested an invite to be sent to a user to be become an Admin. User still has not received an invite from the Adobe Cloud. User email is working as I have sent internal emails and they were received.

    You can follow Creative Cloud Help | Manage your Creative Cloud for teams membership
    You can add a new admin in the accounts either by logging into the Accounts using the Primary Admin's email add or by sending us an email authorizing us to do this .
    Change the primary plan administrator
    How do I switch the primary administrator role to another team member?
    I need to remove myself as the primary administrator for a CC acount and assign to another administrator. How should I proceed?
    Change Primary Administrator for Cloud Team
    How do I switch the primary administrator role to another team member?
    Regards
    Rajshree

  • Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes.

    Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?

    iPhone not appearing in iTunes

  • Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough space available.

    Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough available space.

    The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
    80Gb10 = 74.3Gb2
    It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
    Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
    tt2

  • TS4268 Why does my Imessage not take my Apple ID and password? it has me reset it to get in, but once reset imessage still rejects the password. It seems to randomly deactivate my Imessage

    Why does my Imessage not take my Apple ID and password? it has me reset it to get in, but once reset imessage still rejects the password. It seems to randomly deactivate my Imessage

    Try signing out and then back in again by going into Settings>Store>Apple ID:>Sign Out>

  • Why does my iphone 4s gets really hot even though im not using it, battery drain's 2% every 5 minutes.. and its just in my pocket,. what will i do?

    why does my iphone 4s gets really hot even though im not using it, battery drain's 2% every 5 minutes.. and its just in my pocket,. what will i do?

    some thing is runnng in the back ground. Or your email is struck. Deleted all emails and reboot phone and add them one by one. Or your sim cards has problem. Replace sim card. If nothing works drain battery then recharge battery to 100% full charge.

  • I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, until the next time I need to use it and it does not get recognized again. Is there any fi

    I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

    why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

    IE uses a different version of Flash than other browsers use. You need to install the Plugin version of Flash for Firefox.
    1.Download the Flash setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.

  • Why does flash player not work with facebook?

    Why does flash player not work with fcebook?  Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player.  When I go check which version I have, I always get the message that I have the most current one.  I run Mozilla Firefox with Windows.  I don't know anything else.
    Message was edited by: khettich

    This means you don't have the latest version installed.  Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

  • Why does my macbook pro get hot

    Why does my Macbook pro get hot while I am only on my email account?  This is a recent change.  It gets too hot too put in my lap.  Is it a battery issue.

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

Maybe you are looking for