Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

Let me know if I should start a new discussion instead of opening a new topic here.
My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem.  Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source.  Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all.  In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
Is there any help for this affliction?

Similar Messages

  • Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

    why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

    hi smalley3,
    Welcome to the Forums.
    The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
    If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
    In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
    Support phone list
    Regards
     

  • After syncing a replacement iPad for the first time, my apps have a "waiting " on the screen I can access them but not on opening screen

    After syncing a replacement iPad for the first time, my apps now have a"waiting" message . I can still access from settings but not on the opening app page

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    You may need to delete the game app and redownload (you won't be charged).
     Cheers, Tom

  • HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

    I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

    The warranty is only good in the U.S.
    You woulod have to send it to someone in the U.S.  They could take it in and if it is defective, then it would be replaced.

  • Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    Are the lines like psychedelic herringbone?  If yes, I had that happen once, it was something serious, like the
    Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP.  I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
    Good luck and don't panic.

  • Why does my iPhone 3GS keep restarting on its own, and when I move the phone while its restarting, a white screen comes up and then it takes a while to turn it back on!

    So i have an iPhone 3GS and when i move the phone while its restarting, a white screen shows up, and sometimes i need to punch it to turn it on. HELP i dealt with this problem for months and im sick of it! HELP ME!!!!

    Sounds like hardware failure, called boot loop. Call Apple and or go on apple.com and make Genius Bar appointment to have your iphone reviewed by a Tech. Provided you iphone shows no physical or liquid damage they will take care of you, or if you have Apple Care Plus
    Genius Bar Rerservation :  http://www.apple.com/retail/geniusbar/

  • HT1386 iPhone is timing out when I plug it into itunes for the first time. not even registering

    Just got an iPhone 5S. I went to go and plug it into to sync to iTunes. Upadated my iTunes to the latest version. I plug in th iPhone, yet nothing happens. After a few mintues it says the connection has timed out. Any help would be great.

    Hi rhyseroo!
    Here is an article that will help you troubleshoot this issue with your iPhone not being recognized by iTunes:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • HT4053 Does the iPhone 5 lock you to a network after inserting a SIM card for the first time?

    If you buy an unlocked iPhone 5, when you insert your SIM card does it then lock the iPhone to that network, so that you then need an unlock code to switch networks.

    I have read other posts and have the answer. No need to respond to this question.

  • Does anyone having problem when saving in photoshop for the first time after launching the program it will crash while trying to save file?

    It started a few days ago, I am running Mac Yosemite. It is also happening in Illustrator.

    Yosemite…
    You'll have to wait until Apple fixes all the bugs introduced in 10.10.  Lots of folks are going back to Mavericks.

  • Misspelled email address when login to iPhone for the first time

    Hello everyone,
    I have quite a big issue with my iPhone (I have iPhone 5c).
    When I was creating my apple id for iPhone for the first time (after I purchased it)  I added an unexisting email address by accident (I never had or used that email as a domain I misspelled does not even exist...).
    Now I cannot access my phone at all (I needed to change a SIM card) and when I turned my phone back on, it showed that my phone was assigned for a particular apple id that is impossible to use - as an email (which is also an apple id in that case) and its domain,do not exist ...(it was even impossible to verify password after I accessed iPhone for the first time).
    I did not realized I cannot switch it to the other id to unlock my phone...as to change main apple id I would have to do it through the old one and this is - as I stated above - not possible at all ...
    using iCloud is also impossible for an above reason (cannot log in as I couldn't verify my password for main apple id).
    I have an additional apple id I use for an AppStore (that's how I managed to log in here)
    Does anyone have any idea/advise what are my options now?
    I am unable to use my phone at all because of that
    Thanks in advance!

    If you turned on Find My iPhone turn it off, then Settings > General > Reset > Erase All Contents & Settings.

  • I synced my phone with iCloud for the first time and it put ALL of my husband's contacts on my phone. How to I take contacts off my iphone and reinstall only mine?

    I have archived my contacts on my computer and can reinstall only those, but I can't figure out how to wipe all of his contacts off my iphone.

    You don't.
    You synced your iPhone with iTunes for the first time after how long?
    And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

  • I have an iPhone 4 and plugged it into itunes on my computer for teh first time. Only to discover my sister has obviously plugged hers into my itunes account and now I have lost all my photos and numbers. Please help me!!

    I have an iPhone 4 and plugged it into itunes on my computer for the first time. Only to discover my sister has obviously plugged hers into my itunes account and now I have lost all my photos and numbers. Please help me!!

    It can't do that by itself. You had to click through several prompts telling it to restore it from a backup of an old phone for that to happen.
    If the phone was not backed up to iCloud before this happened, or to another computer, then the data is gone. There is no way to recover it.

  • [SOLVED]....install Arch, for the first time, am i doing it right?

    The first try, it failed at grub boot(froze with blank screen), so now I'm going to install for the 2nd time and I need your help to confirm if the grub installation procedure below is correct.. (Thinkpad x61s-64bit machine)
    # mkinitcpio -p linux
    # pacman -S grub-bios bash-completion os-prober
    # grub-install --target=i386-pc --recheck /dev/sda
    # cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
    # grub-mkconfig -o /boot/grub/grub.cfg
    # exit
    # umount -R /mnt
    # reboot
    ..or should i just use Syslinux instead? There won't be any other OS on the disk except there's a partition i made previously(ext 4) that i used for file storage purposes(music,video,docs etc) and the said partition now reside in sda4 and do not want to delete that as ive got so much stuff in it and my external HD is full. so i'll have to install Arch on sda1/2/3.
    my partitioning scheme would be 2g swap, 20g root and 30g home.
    Thank you
    Last edited by MrPotato (2014-01-06 04:46:08)

    MrPotato wrote:
    The first try, it failed at grub boot(froze with blank screen), so now I'm going to install for the 2nd time and I need your help to confirm if the grub installation procedure below is correct.. (Thinkpad x61s-64bit machine)
    # mkinitcpio -p linux
    # pacman -S grub-bios bash-completion os-prober
    # grub-install --target=i386-pc --recheck /dev/sda
    # cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
    # grub-mkconfig -o /boot/grub/grub.cfg
    # exit
    # umount -R /mnt
    # reboot
    ..or should i just use Syslinux instead? There won't be any other OS on the disk except there's a partition i made previously(ext 4) that i used for file storage purposes(music,video,docs etc) and the said partition now reside in sda4 and do not want to delete that as ive got so much stuff in it and my external HD is full. so i'll have to install Arch on sda1/2/3.
    my partitioning scheme would be 2g swap, 20g root and 30g home.
    Thank you
    You could just use syslinux, but i guess you just had a bad timing with your installation there are a few bugs present with grub at the moment, which are actually already fixed upstream, but not yet available from the official arch repositories. Did you notice any bug messages when running "grub-mkconfig" ? There were probably some "syntax-errors", but they can be easily fixed (https://bugs.archlinux.org/task/38234?project=1&cat[0]=31&string=grub); the method with "GRUB_DISABLE_SUBMENU=y" works fine and you could fix it by "chrooting" into your system again from the live-installation-cd/usb. Alternatively you could enable the testing-repos for installing grub; this version works without the syntax errors, but there is another bug with multiple kernel-entries So the first way would be probably the best way to fix grub at the moment.
    Last edited by tumas (2014-01-05 15:57:54)

  • Backup up an old iphone for the first time ever...

    I'm helping a friend transfer data (over 1,000 photos and some notes)  from her old iPhone to a new one. When connecting to iTunes for the first time with the old phone, it wants to set everything up for the first time and I'm afraid it will erase everything BEFORE we get a chance to back it up.
    Are my assumptions incorrect? How do we avoid losing her data and get a sucessful first-time back up? Any suggestions are greatly appreciated.... THANKS!

    Yes.
    Take a look at this document: https://discussions.apple.com/docs/DOC-3141

  • Why does my iphone 3GS repeat the same song when I choose shuffle?

    Why does my iphone 3GS repeat the same song when I choose shuffle?  It just started doing it today.  I rebooted the phone, I looked to see if th repeat icon was being chosen and I cant even find that anymore!  Help!
    Deb

    You can find the Additional Audio Controls as described here, to check if "repeat song" is also activated.
    http://manuals.info.apple.com/en_US/iPhone_User_Guide.pdf page 94
    Additional Audio Controls
    To display additional controls, tap the album artwork on the Now Playing screen.
    The repeat, Genius, and shuffle controls appear along with the scrubber bar. You can see elapsed time, remaining time, and the song number. The song’s lyrics also appear, if you’ve added them to the song in iTunes.
    Use the scrubber bar to skip to any point along the timeline. You can adjust the scrub rate from high-speed to fine by sliding your finger down as you drag the playhead along the scrubber bar.

Maybe you are looking for

  • Cannot open projects after updating to 10.0.1

    it asks me to update my projects. i press ok. projects are all displayed in the project pane. but when i try to open a project (or sometimes even when I select a particular project), i get the spinning rainbow wheel. i've already tried trashing ~/Lib

  • Doubt in selection screen

    Hi i have a doubt in selection screen I had given statement as below now i can see the output screen and i'm getting the output also now i want to know the value of only one vendor. If i had given a vendor number it must select the particular data of

  • Music not showing up in purchased section

    Hey there, I bought several song a couple of weeks ago. They used to show up in purchased song section in the music app, but now they dont and the album artworks seem to be gone. how can I fix this is really annoying.

  • Problem with RDIV output for order related inter company billing

    Hi , Developing a order related inter company flow . IC Billing (type IVA) gets generated through RVIVAUFT , but facing the following issues with output (though configuration has been done as per note 728993) system only creates SAP standard billing

  • Support message doesn't show automatically the details about created person

    Hi, I'm facing an issue with Support message which has been created in Sattelite system and available at Solution manager system . The issue is , support message doesn't show automatically the details about created person under colum ' Contact Person