Why does my iphone take so long to turn back on when the battery runs out?

Ok, granted, I am guilty of not always plugging my iphone in when it gives me the low battery warning. But why does it take SOOOO long to get enough charge to turn back on? If apple is taking suggestions, then my suggestion is that you should just be able to plug it in and it should be ready to use within a minute, like other cell phones. I've had my battery die mid phone call, and then had to wait for it to get enough charge to call back. I know its maybe only about 5-7 minutes but that seems like forever to return a dropped call. Does this happen to anyone else or is something wrong with my phone? Any suggestions?

Apple set the default to 10 minutes before you can use the iPhone. After 2 minutes you'll get an image of the low battery. It's in the iPhone Users Guide, page 49.

Similar Messages

Why does my MacBook take too long to turn on?

I have a MacBook, the 2008 version, and whenever I turn my MacBook on, an empty gray line appears. When the line is completely filled, it starts to turn on like how it should be. Sometimes, I just put my MacBook to sleep to avoid waiting. Waiting takes more than 3 minutes. By the way, I updated my MacBook to OS X Lion. Is there a reason behind this or any ways to fix this situation. Thank you in advance for reading this!

Remove any items in System Preferrences > Users & Groups > Login Items
Same for HD > Library > StartupItems
Then restart your Mac.
If it's not a startup item causing the slow startup, the startup disk may need repairing.
Startup your Mac while holding down the Command + R keys so you can access the built in utilities in the recovery system.
OS X: About OS X Recovery

My mac no longer saves its state when the battery runs out.. ??

Earlier when My mac drained it's battery & was not plugged in, it would give me a warning then save it's state & shut down.... Now 1 1/2 years into my Macbook Pro 17" intel it turns off but doesn't save my state, so anything not saved is lost.. (basically as if the power was pulled ) is there a setting for this ? or is my battery no longer performing well enough for my mac to safely save it's state before it turns off ?
Anyone ?
Cheers Tom....

Battery Information:
Model Information:
Serial Number: SMP-ASMB014-38a8-97f
Manufacturer: SMP
Device name: ASMB014
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 3728
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 3728
Health Information:
Cycle count: 242
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): 163
Voltage (mV): 12599
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 105
Disk Sleep Timer (Minutes): 180
Display Sleep Timer (Minutes): 90
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 3
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Yes

HT201210 Iphone 4 goes into recovery mode every time the battery runs out?

Iphone keeps returning to recovery mode when the battery runs out and is charged up again. I have updated the software and it still requires a system restore everytime the battery dies, does anyone have an information to help resolve this issue?

That's what I did. When selected restore, it downloaded and verified the installer, and then threw the error that the phone is in recovery mode instead of proceeding with the restore. I then tell it a second time to restore and it proceeds to restore; but I never get the message that the 4 has successfully unlocked.

Why does it take so long for the phone to turn back on after the battery dies?

Is apple going to do anything about the length of time it takes for the phone to turn back on after the battery drains?

Just a thought, but if the battery is not allowed to completely die then the amount of time it takes for the device to power back up is irrelevant.
Charge the device regularly and often. One of the worst things for a Lithium Ion battery like that in an iPhone is completely discharging it.

Why does my iPhone shows "restricted" on other people's phone when I call them?

Why does my iPhone shows "restricted" on other people's phone when I call them?

Lena the only previous e-mail message was on Tuesday Dec 30 which stated…..
Lets get your Caller ID to work as it should! I will send you a private message so that we can better assist.
This e-mail states that another ‘private message’ presumably via e-mail would be sent/received but I haven’t received anything else from an e-mail perspective. Presumably it is just a matter of navigating through a low number of settings to get to the caller-id option.
Thank you,
Steve.
Sent from Windows Mail

Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?

Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support

My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?

My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?

This has happend to my ipod once...
did u keep it somewhere so tightly pressed??
that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!...

I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks

My iPhone keeps shutting off and turning back on when I use it. How can I fix this?

My iPhone keeps shutting off and turning back on when I use safari, my apps or just when I use it, what can I do?? Help!

Try restoring your iPhone.
See here for details: http://support.apple.com/kb/HT1414

Why does my mac take so long to come out of sleep

Every time I wake up my mac mini from sleep, it has a faded out screen, and it takes very long to allow me to use the keyboard and mouse so I can type my password.

slow wake from sleep OS x 10.9.4

Why Does Captivate 4 Take So Long to Close?

I’m using Captivate 4. Sometimes it takes a long time to close a project and the next time I open Captivate, it takes a long time to open, moving very slow through “loading content.” Once I remove and re-install, and then update the patch, it works. But then it does it again. Someone said that it has to do with a corrupt preference or settings file, so when I re-loaded, I didn’t make any changes like adding for example, the alignment bar (which I usually use). Is there anything else that can be done? Does Captivate 5 have a fix for this by any chance?
Phyllis K. Day

Welcome to our community
Unless something has gone catastrophically wrong, you should never have to perform the uninstall/reinstall/reapply the patch hokey pokey. So that's just wasted effort. There is a simple way to perform what I call the "Factory Reset".
I recently described how to do this in the thread linked below:
Click here to view
I might question why this is needed at all. Perhaps you are unaware of some things that help you avoid issues with Captivate.
For example:
How many slides are in your projects? We normally recommend keeping projects somewhere between 50-65 slides as a rule of thumb guideline for the upper limit.
Where exactly are your projects residing when you make edits? Frequently we see folks working with projects on a network drive. This is less than optimal and will often cause issues and slowness and project corruption. Work locally off your C drive and periodically copy the project the network server to be backed up.
Hopefully something here was helpful to you... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Why does FiOS internet take so long to connect when I boot my computer?

Windows Vista Home Premium Service Pack 2. M424WR modem/router. Every time I turn on my computer or even if I reboot, internet takes up to 2 minutes to be able to use. My computer doesn't detect any internet connection until, it seems, it's good and ready. The modem is NEVER turned off and everything else in the house dependant on the internet connection doesn't have a problem. Phones, wireless lap tops, or the PS3. Why does it do this? I have put IHA messenger on manual in startup. But I still get the same problem. Is there any way to fix this? It's so annoying.
And Please, Verizon support, don't send me any private messages that say to call verizon support or asking me to send you my verizon account info. I absolutely HATE that when you guys do that. I'm not spending half my day on hold, and you don't need to know that to answer why the computer is taking so long to find the internet connection. If you don't know why it's doing it, then say you don't know why, or better yet, don't even respond at all. {Please keep your posts courteous}

I have both an XP machine and a Win7 laptop. Both take time after booting to access the network. The culprit is Norton (Symantec). In both cases it runs a security check BEFORE it allows network access.
You may not have Symantec products installed, but if you have any other antivirus software it it probably doing the same thing.

Basic Question: why does exporting Movie take so long?

I import an hour long H264 640x480 movie into imovie. It takes about eight minutes.
I then add a few chapter markers. That's all I need to do.
Then I export as a large movie, also H264. It takes four hours.
So why does it take so long, as it is the same format? Is it just because the size is a a little different? Is there any way to export the movie at the same size as it was originally? Then would it export more quickly?
Thanks.

TimK wrote:
… What is a res?
I assumed that imovie did support h264, as up to now it has been exporting all my movies as h264 by default.
ooops, sorry: res=resolution
iM is meant for Camcorder imports - those trigger the import routines: .dv gets 'cloned' into Events, HDef gets converted into the AppleIntermediateCodec ... which offers the two (three) standards 1920x1080, (1440x1080/anamorph for HDV/'HDef on tape' sources) and 1280x720 ...
The EXPORT codec h.264 isn't meant for editing, but optimized for playback and file-size.
technically, a AVCHD/mts IS h.264
but to avoid technical probs, Apple prefers to transode into intermediates, aic.mov for consumer editor, proRes for FCPX ....
there's playback-codecs and edit-codecs ... for instance, playback-codecs (mp2, h264, Sorenson, VP6 etc) do not store every frame ( ! ) to reduce file-size; now, you like to edit with frame precision ... what shall happen?
an edit-codec contains any solid frame ... = file-size mucho bigger ...

Why does my MBP take so long to boot?

My MacBook (2006, Core Duo, 2GHz, 2GB RAM, 10.6, 5400rpm drive) cold-boots to the desktop in 33 seconds.
My MacBook Pro (Mid 2007, Core 2 Duo, 2.2GHz, 4GB RAM, 10.7, 7200rpm drive) cold-boots to the login screen in 1 minute 17 seconds.
My work MacBook Pro (Mid 2010, Dual-core i7, 2.66GHz, 8GB RAM, 10.7, 7200rpm drive) cold-boots to the login screen in 1 minute 6 seconds.
All of these are timed with nothing physically connected to the computers. Why does my oldest, slowest laptop boot in half the time of my newest fastest one? How do I bring the MacBook Pro boot times down?

My MacBook (2006, Core Duo, 2GHz, 2GB RAM, 10.6, 5400rpm drive) cold-boots to the desktop in 33 seconds.
My MacBook Pro (Mid 2007, Core 2 Duo, 2.2GHz, 4GB RAM, 10.7, 7200rpm drive) cold-boots to the login screen in 1 minute 17 seconds.
My work MacBook Pro (Mid 2010, Dual-core i7, 2.66GHz, 8GB RAM, 10.7, 7200rpm drive) cold-boots to the login screen in 1 minute 6 seconds.
Well it's a combination of the bloated beast of 10.7, it's auto-restore of programs and having more RAM for the Power On Test System to check on the second two machines that differs from the first.
You would think the faster hard drive would help on the second two machines in boot times, but that's not the case as it takes longer for 10.7 to get setup.
Plus Lion was just thrown out there like Vista was, half baked and tested little, 10.8 is the one they are tweaking to be better I can only assume.
Only thing I can advise is to drop all machines to 10.6, or make due reducing the restore at boot programs in 10.7.
You could do a Disk Utility > Zero Erase and fresh install of 10.7 on the last two machines, install apps next then files, keep the boot drive below 50% filled, that's the best you can do really for 10.7, do the same for 10.6 and it will be fast.
How to revert your Mac to Snow Leopard

Why does my iphone take so long to turn back on when the battery runs out?

Similar Messages

Maybe you are looking for