Why does my iphoto slideshow turn blue after exporting?

why does my iphoto slideshow turn blue after exporting?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Similar Messages

Why does my ipod randomly turn off after 5-10 minutes of use?

Why does my ipod randomly turn off after 5-10 minutes of use? Is the battery defective?

I figured it out. Headphones were not plugged all the way in. This support community is awesome. Thanks everyone.

TS3474 Why does my iPod Nano turn off after one minute of use?

I just got a new 16 GB iPod Nano and it turns off after one minute of use. Why does it do this?

I figured it out. Headphones were not plugged all the way in. This support community is awesome. Thanks everyone.

Why does the iPhoto slideshow I exported as a movie only last 5 seconds?, How do I save an iPhoto slideshow as movie?

I followed the instructions for exporting an iPhoto slideshow as a Qucktime movie, but when I drag it onto my iWeb page, it only plays for 5 seconds. What am I doing wrong?

I started having this problem last week. It affects new and old photos. Maybe one in several hundred photos has this problem. Some of them were fine earlier and have been in iPhoto for years.
This seems to be a rendering problem of some sort. When I click on the thumbnail, a fuzzy low-rez image comes up full size, but instead of resolving to full resolution the screen just goes black.
I imported 30 images yesterday. Jpegs created from RAW files by Nikon Capture. All but one are fine. The actual file in the library seems OK (I tried the suggestion above). I can export the photo and it's fine in mail or other viewers. It's just that Iphoto can't seem to display it at full/high resolution. At first I thought that it might be due to the size (12Mpxl) but the other ones are fine, and some of the old images this happens to are small (2mpxl) and taken as jpgs by an old canon point and shoot.
I'm using Iphoto8 7.1.3(364) and the only thing that's changed on my computer recently is adding the latest 10.4.11 java and security updates.
I tried to duplicate the photo, and the problem also occurs with the duplicate. I can't do the revert trick, since I haven't edited the file in any way since import.
Any help would be appreciated. I'm happy to send the affected photo if it helps.
Thanks.

Iphoto slideshow Turned slides when exported to iDVD

Some photos are turned after export to iDVD, how can that be? More importantly how to fix, the slide show looks fine in iPhoto. The image quality is another issue and I'll follow the iMovie thread because I have 353 slides using 19GB in iPhoto. Why are photos being turned?
G4 400 AGP graphics upgraded to 1GHZ & Radeon 8500 Mac OS X (10.4.10) 500 Gig FW 800 back up drive, ESATA 1.5 TB, DVR 109

James:
They are being turned because for some reason iDVD is taking the Original version instead of the rotated version in the Modified folder. These are portrait photos from a camera with auto-rotate capability. I suggest you try exporting the rotated version to a folder on the desktop, drop then into an open Safari window to make sure they are truly rotated and then import them and replace the problem versions.
This can be circumvented by uploading to a folder on the desktop first, previewing the photos in Preview of some other application and then rotating them with a 3rd party application. I use PhotoToolCM which is a Contextual Menu application that will losslessly rotate the photos.
You might try rebuilding the library as follows: launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. Next add some photos to iDVD and see if they are correct. You can also drag the thumbnails from iPhoto into the open iDVD slideshow window and try it that way.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Why does my photo slideshow quality deteriorate when exported to iDVD?

I have a client whose photos look great in iPhoto & iMovie, but look all pixelated when exported to iDVD. I've tried making a slideshow directly with iDVD, but the photos still look worse than they did in the iPhoto slideshow.
The size of the photos is pretty large (as big as 5233 x 3546), which I'm guessing might be part of the problem, so I tried exporting them from iPhoto with a limitation of 720 x 540, but they still look bad. I expect a decrease in quality once I burn the DVD, but these look bad even in the DVD preview.
Any ideas?

All DVD slideshows are defaulted to 640 x 480 pixels. That's the standard. As long as the photos are in the 4:3 dimension ratio you can leave them at their fullest size. You can try using the Pro Quailty encoding to get better quality images. IMO the best image quality is obtained by creating the slideshow in iDVD from still photos. You don't get the Ken Burns effect, but in my opinion it's a bit over used too many time.
If you are creating your slideshow in iMovie then try the following.
1 - when your slideshow is how you want it quit iMovie.
2 - open iDVD, create a slideshow and open the slideshow edit mode.
3 - drag the iMovie project file into the slideshow pane on the left. (NOTE: this lets iDVD scale the movie file to the TV safe area when played on CRT TV sets.)
This also lets iDVD do the encoding for the iMovie assets and avoids two compressions, one by iMovie when you export to iDVD and the iDVD encoding.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Why does my progressive footage look interlaced after export?

I've searched all the discussions on this topic and my issue seems to be very paticular...
I have imported AVCHD 1080p footage (29.97fps and 1.3333pas) into Premiere Pro CS4 Version 4.2.1. I placed this footage into a AVCHD 1080p anamorphic, 29.97fps, 1.333pas, progressive scan sequence. I exported the sequence out with a H.264 codec, 1440x1080p HQ preset and changed the frame rate to 29.97 and the field order says None (Progressive) and my footage when screened on the computer in a Media Player looks interlaced eventhough the raw footage does not look interlaced at all. I even interpreted the footage for all the clips used in the sequence to conform to No Fields (Progressive Scan) Field Order.
Did I leave something out? What am I doing wrong?
I will say that one clip in the sequence was edited in AE and rendered our as a .MOV with a PNG compression type and it does not look interlaced in the final export from Premiere Pro.

So I figured what the problem was...here at my job the manual that was available for the sony handycam was from an older model. I did not know this. I looked up the actual manual online and it specifies that the recording mode I've been using to capture (HQ HD) is actually shooting AVCHD 1080/60i...so my original footage is really interlaced. Here's where I had my "Ah Ha" moment. I'm currently switching to an iMac from PC and when I viewed the raw footage on a PC in the Media Player, it looked progressive. BUT, when I just played back the raw footage on my Mac, it looked interlaced so I knew something was wrong.
OK! so here I am trying to make 1080/60i footage look like 1080/30p this should be fairly easy correct?
(also, thank you Jim for affirming that my process is in fact correct IF I was using said progressive raw footage which made me question the project at it's beginnings)

Why does my iPhoto app not open after upgrading to 10.8.2?

I keep getting a popup that says the application is busy or the files are unreadable. When I hold down the option and command keys while opening, I get a popup that asks me to check what I want to repair, but when I check on one, the other popup appears again, the app is in use or the files are unreadable. I can drag photos from my pictures file to the app, but it won't receive them because, "the app is in use or the files are unreadable. What can I do to make iPhoto functional?

Same with my 2011 Imac -- i was actually trying to use ethernet connection to update to 10.8.2 to see if i that gets rid of the wifi drop outs @!! Hillarious if it wasnt so frekin frustrating, I am renting a wireless 4g dongle for the month as its the only internet access my Imac will handle until Apple gives us our connectivity back --- i heard they really don't pay attention to these forums, so may be longer than a month !

Why does "Â" show up in image title after export?

This drives me nuts. When exporting files, the title changes on my images. The character "Â" appears within the title of my image. It's doesn't appear when I look under Library>Metadata. So everytime I use the exported files on my blog, I need to go in and change the name to a whole gallery of images.
Please help.

portergraph wrote:
LR/Mogrify - been using it since LR came out for years without issue and now lately using LR3, I get that character.
I would try disabling LR/Mogrify just to see if it's in the game. Are you aware of the fact you need LR/Mogrify 2 on LR3?
Beat

Why does my iPhoto red eye reduction tool only give me blue or black blobs in the eyeballs that look completely unacceptable?

Why does my iPhoto red eye reduction tool only give me blue or black blobs in the eyeballs that look completely unacceptable? Automatic mode makes blue blobs that cover iris and even eyelid! Manual mode gives black dots, not at all hte shape of a oerson's iris as seen in a picture.

And again the answer is simply
THere is no fix - that is the way it works - you can post as many times as you want but it will not change the fact that that is the way that iPhoto works
No fix
No work around
It is what it is - nothing more - nothing less
LN

After the new update, why does my Bluetooth keep turning itself on? I keep turning it off, but it still finds a way to turn itself back on

After the new update, why does my Bluetooth keep turning itself on? I keep turning it off, but it still finds a way to turn itself back on

hi Apfelwurm,
why do you say it's not normal.
it always switches itself on after i update. it just did again, this time for 7.1.2.. i t also will switch on after a restore.
i never use bluetooth and make sure it's not on for any other reason.
it's been noticed by others too.
http://www.forbes.com/sites/kashmirhill/2014/03/12/apple-keeps-turning-bluetooth -on-when-you-update-your-iphone/

My macbook air does not start up successfully. when i turn on the power, it just turn blue after the apple logo, how to reboot or repair,.. pls help me what is the buttons command... thanks in advance.

pls help me how to reboot my macbook air,.. because starting it up was not successful. the screen just turns blue after the apple logo appeared.

i know loads of people who have had this problem including me. The Java script update apparently had some virus that has overloaded the start up disk. I took to apple who said i have to have the machine rebuilt but first i have to go to a data recovery company to get back everything that was on it. Data recovery company have quoted me nearly £1000.

Why does my iPod Shuffle stop working after a few songs?

I had my iPod Shuffle for about a month now and it's already causing me trouble.
I would play a couple of songs, but when I go to change it, it stops working. I turn it off and on again only to have it take me back to where I started off at (e.g. Let's say I have 100 songs, I start at 50 and I get to 55 before it shuts off. When I turn it back on, it starts at 50 all over again). This process would happen over and over again with seemingly no end.
So my question is, why does my iPod Shuffle stop working after a few songs and how can I fix it?
I already tried using the iTunes troubleshooting guide, but nothing worked.
Details -
4th Generation
I only use it at the gym or when I'm running
I've only used the Apple products that came with it so far
(e.g. charger, headphones, etc.)
881 MB are still left
Music stops randomly, no common number or pattern

I had the same problem, I purchased a new ipod shuffle, followed the instructions but it would stop after a few songs and I would have to shut it off, wait and turn it back on and it would go back to the same song and then once again, after a few songs it would shut off. I returned the ipod and got another one, same thing happened. This is how I resolved the issue.
1. open itunes, make sure its up to date, then connect your shuffle to your pc
2.on the left of the itunes window, select your ipod, then at the top select music then check the sync box and select "selected playlists"
3.then go back and click on your ipod on the left, a message will appear just select apply
all of your music should be emptied from your ipod.
4.delete all of your playlists on the left, this will not delete anything from your library. Delete the "purchased" playlist under itunes store on the left as well, once again this will not delete anything from your library
5.There should be an arrow just in front of your ipod, click on this arrow and you should see your music file for the ipod appear, this should be the only file that you see, everything else should be deleted.
6. go to your music library and check only the songs that you want to load into your ipod. Double click on each song to make sure that they all play.
If you find a song that does not play you should be asked to authorize it, don't waste your time that did not solve the issue for me, instead cancel to authorize the song and then delete the song and move it to recycle bin. Once the song is deleted a cloud should appear, click on the cloud and download the song again, when done, make sure the song plays and that it is checked.
7.After you have made sure that all of the songs play and are checked, click on your ipod once more, located to the left, check the box "sync only checked songs" then from the top select music. In the music window select "sync music' and then select "entire music Library"
8. Go back to the left and click on the arrow in front of your ipod, you should see the music file, click on the music file and you should see all of your music being loaded to your ipod.
9. When all of the music is done loading, eject your ipod by clicking on the arrow located after the battery symbol where your ipod appears on the left
10. Turn on your ipod and scroll through your songs to make sure that the problem is resolved.
Not sure if all of this was necessary but it worked for me.

Why does my iPhoto quit every time i use it?

why does my iPhoto quit every time i use it?

Thanks for your help.
1st, when I go to software updates, it says all my software is up to date. Perhaps that is because I only have OS 10.7.5 and the updated iPhoto version is for an updated OS version.
I turned off the counts in prefernces and still can empty the trash. It gets stuck and will not empty more than about 1/5 of the trash.
Can you help me figure out the fastest way to back up iPhoto. I have the cloud backup but not sure how to check to see if it is actually backing up my photos. Do you know how to check into this? Is it better to back up on a hard drive?
Thanks again for your help ...

Why does my iphone keep turning off when i put my pass code in

why does my iphone keep turning off when i put my pass code in

Hi ManiPictures,
If your iPhone shuts down unexpectedly during use, I would suggest that you troubleshoot using the steps in this article -
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
As your iPhone's operating system is already up to date with iOS 8.1.1, follow the last instruction -
If you still see this issue after updating, contact Apple Support.
Thanks for using Apple Support Communities.
Best,
Brett L

Why does my iphoto slideshow turn blue after exporting?

Similar Messages

Maybe you are looking for