Why does my ipod 4th generation ipod nano say there is 2.9 gbs of other on it when all that is on it is music?

My ipod was freaking out the other day saying it couldnt be found and it had an error so i told y computer to fix it. Next thing i know, 600 of my songs are gone and i have 2.9 gigs of "other" when the only thing on my ipod is music. its so old and i need to get a new one but can anyone tell me how to fix it?

Because there is a corrupt file on your Touch. Restore it in iTunes from your backup.

Similar Messages

Why does my ipod nano turn off and on?

why does my ipod nano turn on and off?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Did you try everything above, including trying on another computer? If so then
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Why does my Ipod Nano sometimes lose volumn

Why does my Ipod Nano sometimes lose volumn?

If the Nano is not in a protective case while you are working out, there may be a good chance that sweat/moisture has found its way into the inside of the iPod causing its buttons and functions to short circuit. Several users who used their Nano for workouts have run into the same exact issue.
Some have been able to correct it by giving the iPod a few days to dry out and then clipping the Nano to another location on their body and/or using a protective case with the Nano.
B-rock

HT5957 Why does my iPod Touch say that its software is up-to-date when it is still iOs 6.1.3 and there is no update coming in to iOs 7?

Why does my iPod Touch say that its software is up-to-date when it is still running iOs 6.1.3 and shows no update to iOs 7?

You have a 4th gen ipod touch.
Identifying iPod models - Support - Apple
Apple has posted the ios 7 compatible models on their website since early June.

HT2731 why does my ipod keep saying your apple id has been disabled when i try to get a free app?

Why does my ipod keep saying 'your apple ID has been disabled when i try to get a free app???

If you rest it on your computer's iTunes then try logging out of your account on the iPod by tapping on your id in Settings > Store and then log back in and see if it then works.

Why does my ipod nano now need a 10.5.8 system.

I got my 4th generation ipod nano 2 years ago, and now it is not recognized on my mac 10.4.11, though it does charge up when connected. I followed all the steps in the troubleshooting manual on the apple site for this problem. I was told to get the latest update of itunes, but that update has system specifications that require 10.5.8 or later. Is Apple trying to force me to replace my perfectly fine 10.4 in order to use my ipod properly? How can I continue to use the ipod apple sold me?

The IPod does not appear on my desktop at all. I've tried both USB ports and 2 different cables. I tried resetting while connected and yes, I did try placing it in disk mode. It fails at step 5:
"5. When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears."
The apple logo appears, but when I hold down the select button and the play/pause button, the disk mode screen does not appear. All that happens is that the ipod turns on. I've tried all the steps, including the flat surface and different hands. It just won't work.

TS3474 Why does my iPod Nano turn off after one minute of use?

I just got a new 16 GB iPod Nano and it turns off after one minute of use. Why does it do this?

I figured it out. Headphones were not plugged all the way in. This support community is awesome. Thanks everyone.

Why does my iPod Nano no longer work with JVC TH-BC3 dock?

I have a JVC TH-BC3 soundbar with a built-in iPod/iPhone dock. My iPod now displays a "non-compatible" message on the screen when I when docked in the TH-BC3. What is the problem?

I sent the question to JVC's support desk and they sent the following reply -
Thank you for contacting JVC Customer Care. My name is Veronica, your email care specialist. We value you as a JVC customer and appreciate the opportunity to be of assistance.
I understand you are experiencing difficulties with your JVC TH-BC3 recognizing your iPod Nano. We do apologize for any inconvenience that this may have caused. What generation is your iPod Nano? By any chance have you recently updated the iOS? If so, it may just require a soft reset. Simply press and hold the Menu and Home button until the Apple logo appears. This will not erase any information on your iPod/iPhone, simply reboot the software. Please make sure the iPod/iPhone is not connected to the unit while performing the soft reset.
I performed the soft reset and tried my iPod Nano in the dock and it now works!

Why does my ipod nano shut off after taken out of charger

Whenever I take out my iPod Nano Generation 6, out of the charger cord, it works until I press the power button, and stays in sleep mode. Even after holding the power button, it won't turn back on.

This used to happen once in a while with my ipod classic. You need to "reset" the ipod. For the 6th Gen. Nano, try holding down the sleep/wake button and the volume down button simultaneously, for about 8-10 seconds, or until the apple logo appears. You can also see the info here: support.apple.com/kb/HT1320

Why does my iPod nano shut off randomly? I just bought it. After about a minute of music, it shuts off.

I just bought my wife an iPod nano. Went through the set up and then updated the iPod through iTunes. Now, after about a minute of music (with two different sets of headphones) it simply shuts off. As if it's in power convseration mode. But I can't find a setting to prevent this. Very frustrating for having JUST bought this.

If you have not already, do a Reset following this procedure.
http://support.apple.com/kb/HT1320
A Reset just restarts the iPod. It is not erased.
If that does not help, the most likely fix for your problem would be a Restore. This WILL erase the iPod, re-install its softare, and set it to default settings. To do it, select the iPod in the iTune sidebar, under DEVICES. Over to the right, go to the Summary tab. The button for doing a Restore is there.
For anything that is currently on your computer (such as songs and pictures) that were synced to the iPod, you can just re-sync them. That should not take too long, even if you do it manually (without using automatic syncing).
For anything that is only on the iPod (not on your computer), they will be lost if you do a Restore. But that was a known risk. After all, your iPod could be lost or stolen (or seriously damaged), and those items would be lost.
If those items are songs you purchased from the iTunes Store, you can re-download them (at no cost) on the iTunes Store Purchased screen.
or even be recognized by my computer when it is like this. It just sits there.
If you are having a problem getting the iPod to be recognized by iTunes, which is necessary to do a Restore, try this... Set the iPod to Disk Mode.
http://support.apple.com/kb/HT1363
Then, see if iTunes will recognize it when connected. Also, if it is recognized more reliably in Disk Mode, before doing a Restore, you can try using a third-party method or utility to transfer song files off the iPod to your computer. If you do a Google search on something like "ipod transfer," you should get some links.

Why does my ipod nano keep pausing about 10's seconds into a song

when my ipod nano 8Gb is plugged into my computer works fine. but when i unplug it it plays for abt 10=20 seconds and then it pauses..very annoying. anyone know how to fix before i throw it against a wall?

Your nano is pausing playback when the screen goes dark (Either when it goes dark on its own or when you click the sleep/wake button). The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
i

Why does my ipod nano keep shutting off?

My new Ipod nano keeps shutting off after about a minute when playing music. It is fully charged.

Hi, I had the same problem googled the problem & it said to make sure ear piece is in as far as possible , make sure no silver is showing on the jack, check out ifixit.com. mine now working ok.

HT1414 Why does my Ipod touch say its disabled for 22,699,014 minutes?

My ipod touch is disabled asking for a passcode.How do you get to the passcode screen?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Why is my ipod touch saying there is insufficient memory to take a picture or download a new app, even after I have deleted lots of pictures and apps?

My ipod touch memory doesn't seem to be working correctly. I tried to take a photo and it said there was insufficient memory. I deleted all my pictures but it still said the same. I cannot take pictures or download any apps or the latest systme update despite having now deleted several apps and all my photos.

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect the iPod to the computer and sync
- Next, click on the iPod under Devices in iTunes. How much storage is used by the various categories as shown in the colored bargraph? How much is used by "other".
- Sometimes when you delete items and do other things files get put in the "other"category and use up storage. If the "other" is >0.75 GB or so then restore the iPod.

Why does my iPod Nano 6th generation stop playing after a specific time only on 2 songs? (but both at different times)

My Songs (Eminem,Just Lose It) stops after 57 second seconds and my other song (Jessie J, Who's laughing Now) stops after 1 minute 23 seconds. I think this might've happened because internet connection was lost while it was loading but I'm not sure how to help it and find a way to make it play fully threw.

Do these same songs play okay in iTunes? Were they originally downloaded from the iTunes Store?
Have you worked the suggestions in this Apple support document.
Troubleshooting songs that skip
B-rock

Why does my ipod 4th generation ipod nano say there is 2.9 gbs of other on it when all that is on it is music?

Similar Messages

Maybe you are looking for