Why does my iPod say cable or accessibility will not work reliably with this iPod when ever I plug my charger?
So..
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
Why does my phone keep popping up messages "This cable or accessory is not certified and may not work reliably with this iphone" when there is no cable connected? This has been happening since IOS7 was installed and has become worse with 7.1. I have reset the phone several times with no change.The phone charges properly & I have never used anything but an Apple Lightning cable.
I already cleaned the port with compressed air before submitting the problem. I since cleaned it with a toothpick and dug out some more lint. this seems to have just about fixed the problem since I have only had the error pop up 3 times since then and i was getting the error constantly before.
-
Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
Anyone else have this issue after they upgraded the iOS system?
Thanks,- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
What is up with this error message after updating saying our cables are not reliable?
Thank you for this suggestion, but the message continues to display every couple of minutes. (e.g. "This cable or accessory is not certified and may not work reliably with this iPhone.)
Not only is it annoying and concerning...this is draining my battery, as the iPhone keeps waking up to display the message over and over. Like "MartinLegodi" above, I also have no cable or accessory plugged in and only use Apple cable and products when I do.
It's a disconcerting mystery. -
Since the update it keeps happening and nothing is plugged in the phone. It was fine until this jarg update!! The only accessories I use are the charger and headphones what came with the phone. When my phone is on charge the error message doesn't pop up but as soon as I take it off charge booooom it pops up every two ******* mins
MartinLegodi wrote:
Same problem with also receiving an error message saying cable is not certified and it also happens went its not plugd in mxm i hate this:-(
If you actually read the message thread you posted to you will find a solution. -
It still charges in the wall, but when it comes to putting songs or pictures on my iPod, it won't connect to iTunes or charge while plugged into my computer.
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. iOS 7 made the iPod/computer more sensiteve to cable problems
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here. -
My phone will not charge it says this cable or accessory is not certified an may not work reliably with this phone? What do I do?
Is the cable the one that came with your Apple device? Is it a replacement cable that you purchased? If it is, did you purchase an Apple certified cable?
Cheers,
GB -
Please help me eliminate this repeating warning message on my iPhone 5. It occurs several times a minute. I am only using Apple devices, so the warning is in error. "This cable or accessory is not certified and may not work reliably with this iPhone."
The cable may be damaged. Try another cable.
Make sure it properly connected at both ends. -
HT1476 This cable or accessory is not certified and may not work reliably with this iPhone
This cable or accessory is not certified and may not work reliably with this iPhone
This is an incredibly stupid move by Apple. Nobody could convince me that it's about security and safety...
I bought two Lightning to 30-pin Adapters to use my two 4s chargers with my 5s iPhone.
Price on Amazon - 3$:
http://www.amazon.co.uk/gp/product/B00IA95L2A/ref=oh_details_o00_s00_i00?ie=UTF8 &psc=1
Price on Apple for the same thing - 60$
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
This is just a piece of metal and plastic. It's ridiculous.
Apple, please remove this ridiculous software. I also have a car charger. Should I just throw them away because I paid a bunch of money for your new device? That's how you reward loyalty?!! -
Yes but i have to laptops & i plugged them into both & my ipod says the same thing , but do you have a link for the tech support were i can talk to them online , i cant call them right now.
-
For a few days now I have been getting this error message appearing every few minutes. Is there a way to stop it? it appears when nothing is attached. I'm not charging my iPad and have not attached any cables / accessories other than the USB cable supplied when I bought it less than a year ago
Have you tried to give your iPad a reset? Hold down the sleep and home keys for about 20 seconds. WHen you see the silver apple, let go and let it reboot and see if that helps.
That message started with iOS7 which brought with it software that looks for signed chips in approved accessories. If the maker of the accessory got permission from Apple, then they got signed chips to put in their accessories, but if the manufacturer didn't get permission then the chips aren't signed and trigger that error. HOwever it's only supposed to happen when something is plugged in, which is why a reset may help. Force the iPad to reboot and see if it can figure out that there's nothing plugged in. -
Does anyone know why my iphone5 has not been able to charge since ive updated it to ios7?
It's happening even with cable that came with my wife and my own iphones. We bothe get the message!
-
Time Warner Cable RoadRunner Radio Will Not Work In FireFox 8.0 Is there A Plug in that i may need?
Im running windows xp pro sp3 windows media player 11 firefox 8.0
Im running windows xp pro sp3 windows media player 11 firefox 8.0
-
Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?
Refer to this article to restart AMDS:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Maybe you are looking for
-
Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL
Hi all, We just upgraded SAP from 8.82 PL02 to 8.82 PL15. Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach. Before the upgrade this error did not happen. No permissions or authorizatio
-
Payment terms in vendor master record
Hello, How can I make the payment terms mandatory in the vendor master record? Thanks, Annabelle R.
-
Hi, We are updating the basic start da of order using FM BAPI_ALM_ORDER_MAINTAIN. We are deleting the basic finish date and then updating the basic start date. I am observing the following: 1) For some orders, the basic finish date is recalculated, w
-
Automation Framework using eCATT
Hi, Third party tools like QTP provide automation frameworks and required scripting support to enhance it.Please let me know if automation framework is feasible with eCATT. Is there any automation framework readily available with eCATT?
-
HELP! iMac (early 2008) keeps freezing or restarts.
Problem description: iMac, early 2008, 20 inch screen keeps freezing or restarts. EtreCheck version: 2.1.4 (107) Report generated December 17, 2014 at 11:27:04 AM EST Click the [Support] links for help with non-Apple products. Click the [Details] lin