Why does my ipod stay on the loading screen ipod 4g

my ipod touch is a 4G and it stays on the loading screen. It's bin a day that it is doing that and its wierd do you have any tips to help me wiht this bug please help me please or can you do some thing
if you responde please reponde to [email protected]

Try here:
iOS: Not responding or does not turn on

Similar Messages

Why does my Mac stay on the white screen when I turn it on?

Why does my Mac stay on white screen when I turn it on?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 4
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 5
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 6
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 7
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 8
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 9
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 10
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HT4528 my iphone 4 shut off and wont turn back on so i had to go to restore it and it wont reload or anything just stays on the loading screen and does nothing?

my iphone 4 shut off and wont turn back on so i had to go to restore it and it wont reload or anything just stays on the loading screen and does nothing?

Hi marissacav,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
- Judy

My MacBook Will Power up but stays at the loading screen.

My MacBook will start up but stay at the loading screen with the apple logo for ever and wont go to the log in screen? why is this happening

why is this happening?
The disk may need repairing.
Use Lion Recovery

Why does movie stop and show the home screen

why does movie stop and show the home screen

(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

Why does my macbook air only stay on the loading screen?

When i turn on my macbook air it only shows the loading screen. How can I fix it?

See this Apple note.

My cloud has stopped working. I tried using it and all it does is get stuck on the loading screen

So what can I do? I just got a better phone and I am trying to restore everything on that phone but it will not go off the loading screen. I tried force stopping it and uninstalling and reinstalling it. it still wont load up. My cloud wont even log in on the desktop app

Which phone are you transferring from and which phone are you transferring to?
Go to the App store and download JS Backup. On your old phone start the backup app and tell it you want to transfer the content to the new phone. On the new phone you want to restore or import the info. then follow the instructions and get some coffee. It will take about 15 minutes to do it all.
Then on the new phone save your contacts to Google so you do not run into VZW Cloud hell trying to get them back. For other content you can use JS Backup and save it to your computer (it will do it automatically with the computer app as well.
Then Disable VZW Cloud and save yourself a lot of headache and trouble over the next 2 years.

I thought i lost my iPhone so i went on iCloud and erased it, so now after it erased it went to shut down and is staying on the loading screen like its trying to shut off

its frozen on the loading screen to turn off

Hey there tblemings,
It sounds like your iPhone seems to be stuck on the Apple logo screen. I would try resetting the device with this process:
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If resetting doesnt work, then I would try putting the phone in recovery mode with this article and restore it with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Take care,
Sterling

My macbook was runnig slow so i turned it off using the power button i then tryed to turn it back on and it turns on stays at the load screen with the apple with the loading sign spinning and a bar under that then my mac (late 08) turns off help please

Help please

Reinstall OS X using one of the following. The first is for Snow Leopard and the later for Lion/Mountain Lion.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Why does my music control on the lock screen not working?

When My phone is locked and I want to control my music that is playing, nothing happens. The play button is showing and the song that I am already listening to is not showing up. I can not skip forward or go back. I have powered off the phone and it is still doing the same thing. Somtimes the double click of the home button does the same thing, but it is more concerning for the lock screen control.
I just saw this issue come up with the New iOS6 download.
Help?

There is corrupted data or settings on your phone.
Try as needed:
1. Settings > General > Reset > Reset All Settings
2. Restore iOS using iTunes, also restoring a backup
3. Restore iOS using iTunes as a new phone .
iTunes: Restoring iOS software

I erased my ipod and it has stayed on the loading screen. Why?

please help

You'll want to connect your iPod Touch to your iTunes library in recovery mode and restore it using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

My ipod keeps staying at the loading screen.

When i turn on my ipod it sstays on the screen of the apple sign, some times when the batttery life is dried it turns off, if i turn it back on it jsut stays on that screen again, what can i do to fix this?

Go to this page: http://www.ifans.com/forums/threads/how-to-force-ipod-ipad-or-iphone-into-restor e-mode.2790/

Why does my mac stay on the pin wheel screen when I try to shut down

When I try to close my iMac down, the screen goes blank except for a spinning pin wheel. This does this for a while and I then have to turn it off manually. It doesn't do it every day but will if I've used Photoshop that day. Any help with this would be greatly appreciated.

The spinning wheel indicates something is still running. This can be caused by many things and it can be difficult to troubleshoot what is causing your spinning wheel, in order to get some ideas you may want to read over:
http://www.thexlab.com/faqs/sbbod.html

Why does my iMac stay in the year 2009

I have an iMac that consistently shows the year 2009 in the calendar and mail. I've gone through two OS upgrades, but the problem persists. It's stuck there. If I add a new iCal item it shows up on the 2013 calendar, but I cannot add dates for 2014. It always shows 2009 in the Item Inspector entry year. I cannot organize mail my the year because everything is posted as 2009. Any suggestions?

To determine if you are seeing incorrect dates or times because of a custom date or time format:
Open System Preferences.
From the View menu, choose Language & Text (Mac OS X v10.6 or later), or International (Mac OS X v10.5).
Click the Formats tab.
Choose your desired region from the Region pop-up menu (any region other than Custom).
Quit the application where you were seeing incorrect dates or times displayed.
Open the application again, and verify that the dates and times are now displayed correctly.
More tips from this article!
http://support.apple.com/kb/TS3579

My mac stays on the loading screen and when I boot into safe mode it loads the background but no icons

My mac was working fine the other day and I started it up today and it loaded to a blue screen so I restarted it and went to safe mode and it loaded up with the background and mouse but no icons. Could I please have any help thanks.

Just to confirm, your iMac is a "G5" (not Intel), and THIS is the procedure you used to reset the SMU
http://support.apple.com/kb/HT1767
and not the procedure for Intel iMacs.
If you have the iMac connected to an old (or overcrowded) power strip, try connecting it directly to a wall outlet by itself. Make sure no other cables (other than the power cord) are connected.

Why does my ipod stay on the loading screen ipod 4g

Similar Messages

Maybe you are looking for