Why does my iTunes only show iTunes U and podcast options

Why does my iTunes only show iTunes U and podcast options at the bottom. I just want to be able to watch movies on my iPad :(
Plus when I go to the videos app and tap go to iTunes Store I get a blue message that says "cannot connect to iTunes Store".
Help please, very frustrated as I'm not at all tech savvy

Check what you can buy in your country:
http://support.apple.com/kb/ts3599

Similar Messages

  • Why does my ipod only show an apple and wont start up

    Why does my Ipod only show an apple and wont do anything else>  And holding down the two buttons has done nothing!

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Why does Startup Manager only show Recovery HD and not my other drives like Macintosh HD and my USB drive?

    I'm not really sure what happened to my Mac but when I start it, it only shows Recovery HD and nothing else.  I tried re-installing Mountain Lion through my Apple ID but it states that I have not purchased it and will not let me proceed.  I have bought a usb drive that has Mountain Lion, since I cannot purchase it in the apple store, on it to install it from there but I cannot boot into my USB because it only shows "Recovery HD" in Startup Manager.  I would really appreciate some input from you all, thank you for your time in advance. 

    Either your drive is failing or has been corrupted. Please try the following. You cannot do the following unless you have purchased Lion or later. From your post that's not clear. Without knowing your exact model I cannot tell you what to do.
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
        Note: You will need an active Internet connection. I suggest using Ethernet
                    if possible because it is three times faster than wireless.
    If your computer is a 2010 or earlier model, then you should be able to do the following:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • ITunes only shows my last 10 podcasts

    I've been submitting Podcasts to my Cabaret Secrets feed for about a year now but iTunes only shows my last 10 Podcasts. The others don't seem to be there anymore. Any ideas?

    iTunes does not limit the number of episodes shown until you get to 300. If you examine the feed you will probably find that there are only the ten episodes in it. Many podcast creation programs and services limit the number of episodes show in the feed, moving older ones to an archive page and out of the feed once the limit is reached. There is usually a setting to increase this number.
    Please always post the URLs of your iTunes Store page and feed; without them one can make only the most general comments.

  • HT1491 My iTunes only show: iTunes U and category , no music and books and other stuffs.

    My iTunes only show: iTunes U and category , no music and books and other stuffs. Is it because of my Chinese ID?

    You can only purchase content from the store where your credit card is registered - and that credit card must be registered to a valid address in that country. I am afraid that you are restricted in what you can legally purchase from Apple.
    Sometimes the restiction of content has to do with licensing rights and sometimes governments will restrict the content that Apple is allowed to sell in their countries.

  • HT1539 why does the download only show in shared content on my ipad? and can i access the shared content without wifi ( example driving in car?)

    I am using the icloud from a pc, and sharing with my ipad ( 1st generation) new to this. I have downloaded some digital copies into my itunes account. On my Ipad one shows under movies and 2 show under shared. Y is this and can shared content be accessed without being contected to my home wifi?

    I did a little bit more research, and if I go into iTunes and choose to display TV Shows and Movies as a List, I get a nice, sortable list of movies and shows to which I can add columns. A column that you can add is called "iCloud Status."
    This column shows either Purchased or Ineligible for all of the titles. And this is where things get really confusing.
    Sure enough, the items that are "missing" from the iPads, iPhone, Apple TV, etc. are the Ineligible items, but that's not the confusing part. What IS confusing is which items are Ineligible.
    A good example is my Deadliest Catch collection -- I own the entire season 3 and 4 of DC; season 3 is Purchased and Season 4 is Ineligible. Back to the Big Bang Theory, I have five episodes from Season 4 -- 3 are Ineligible and 2 are Purchased.
    It makes absolutely no sense that episodes from the same season of the same show would be a mix of Purchased and Ineligible!

  • Why does my macbook only show 30% of the hd space?

    My macbook seems out of space, of 232,5 GB only 2,37GB are available, but from leggible data I only have 84,5 GB on my hd,
    what is the rest of the memory full with?
    interesting is also that my macbook is called name-macbook-7 - this is my first and only macbook!
    and in the section 'About This Mac' / More Info...   it says name's MacBook (4), where does this come from?

    Hello Dustin,
    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474
    Open Console in Utilities & see if there are any clues or repeating messages going by?
    How much free space is on the HD, where has all the space gone?
    OmniDiskSweeper is likely the easiest/best, and is now free...
    http://www.omnigroup.com/applications/omnidisksweeper/download/

  • Why does my query only show clients when there is no criteria defined?

    My query simply wants to display different properties of a computer.  There is no limiting criteria and yet it will only display those systems that are SCCM clients. The collection is an AD OU with both clients and non-clients. Here is my query.  Thank
    you.
    select SMS_R_System.ADSiteName, SMS_R_System.DistinguishedName, SMS_R_System.IPAddresses, SMS_R_System.LastLogonUserName, SMS_R_System.Name, SMS_G_System_DESKTOP_MONITOR.Description, SMS_G_System_SYSTEM_ENCLOSURE.SerialNumber, SMS_G_System_PHYSICAL_MEMORY.Capacity,
    SMS_G_System_LOGICAL_DISK.Name, SMS_G_System_LOGICAL_DISK.Size, SMS_G_System_COMPUTER_SYSTEM.Manufacturer, SMS_G_System_COMPUTER_SYSTEM.Model, SMS_R_System.Client from  SMS_R_System inner join SMS_G_System_PHYSICAL_MEMORY on SMS_G_System_PHYSICAL_MEMORY.ResourceID
    = SMS_R_System.ResourceId inner join SMS_G_System_LOGICAL_DISK on SMS_G_System_LOGICAL_DISK.ResourceID = SMS_R_System.ResourceId inner join SMS_G_System_COMPUTER_SYSTEM on SMS_G_System_COMPUTER_SYSTEM.ResourceID = SMS_R_System.ResourceId inner join SMS_G_System_SYSTEM_ENCLOSURE
    on SMS_G_System_SYSTEM_ENCLOSURE.ResourceID = SMS_R_System.ResourceId inner join SMS_G_System_DESKTOP_MONITOR on SMS_G_System_DESKTOP_MONITOR.ResourceId = SMS_R_System.ResourceId

    They don't negate non-client results -- your query does because it is using inner joins. Inner joins drop rows in the "left" table if there is no matching row (based on the join condition) in the "right" table.
    The SMS_G_System_DESKTOP_MONITOR probably does not have any rows for your non-client resources and so the entire row gets dropped. That's how inner joins work. If you don't want this to happen, then you need to use an outer join -- typically a left outer
    join is what you want. This is all SQL specific and has nothing to do with ConfigMgr. It also has nothing to do with SSRS.
    There are tons of great resources on both SQL and SSRS -- just use Bing.
    Jason | http://blog.configmgrftw.com

  • Why does my tv only show black and white

    I see only black and white on my tv from my apple tv

    Thank you,
    I have set the unit to factory restore and the tv resolution to 480i.  I have done a reboot. The tv is an old tube tv, and is set to factory resolution and cannot be changed, there is no settings to change the resolution/settings.  The tv color is fine during the cable settings.
    Thanks
    vince

  • Why does my TV only show the background image on my iMac when connected through the thunderbolt port?

    I connected my iMac to my LCD TV using an HDMI cable and then an adapter to connect to the iMac's thunderbolt port. However, I can only see the wallpaper of my iMac, but not any other application that is open. Could anyone help me resolve this issue?

    The TV is  seen as a second monitor, you need to drag content onto it. Just click this window and drag it to the left and it should appear on the TV. If you want the TV to mirror what you see on  your iMac then you have to tell got to System Preferences - Display - Arrangement tab and click Mirror Displays.

  • Why does application manager only shows me CS6 version of the apps? How do install the CC versions?

    Everything in the Adobe site leads me to believe that the CC versions of the aplications are the current versions, however, when I open application manager, I only see the CS6 versions. Do I have to uninstall something and then reinstal? What do I do to install the CC versions?

    The Creative Cloud versions will not be available until June 17th.  Please see the following related discussions.
    http://forums.adobe.com/message/5361832#5361832
    http://forums.adobe.com/message/5374914#5374914
    http://forums.adobe.com/message/5381796#5381796
    You can also find more details in our Creative Cloud FAQ at http://www.adobe.com/products/creativecloud/faq.html.

  • Why do some websites only show the headings and not the rest of the page? I was on the same website at a different location and it had discriptions for the words.

    When in ma-vitalrecords.org, I put in the county and town and then went to the names. It pulls up the last name, but the rest of the information does not show, such as the child's name, date of birth, and parents. When I am at the library or other's homes, this information shows. This is not the only website that this does this. Sometimes if I hover the arrow over where the words should be, I can see the information down in the status bar. On the above website it did not.

    Hi,
    I have the same experience. I've been narrowing down causes, but it's NOT because you're not connected to Wifi. It seems to be intermittent. For expample, I'm connected to WIFI right now. Some messages or pix that were viewable yesterday are not viewable now and others aren't. All of the messages and their attachments are available from my laptop. If I try again later, I'll be able to see different downloads than what I can see now. What's odd is all of them worked just right a few weeks ago

  • WHy does my iPhone not show up in my iTunes when I plug it in?

    WHy does my iPhone not show up in my iTunes when I plug it in?

    It could be for any number of reasons. Since you do not identify the computer OS you use, here is information for both.
    Windows:     http://support.apple.com/kb/TS1538
    OSX:     http://support.apple.com/kb/TS1591

  • Why does my ipod touch show up in iTunes then disappear?

    Why does my ipod touch show up in iTunes then disappear?  The computer seems to recognize it as a camera device, rather than a mass storage device.  Does this have anything to do with the problem?  When plugged in, a window pops up asking which photo program you'd like to use, and if you cancel, that's it.  Even if you try to open a photo program, and download your photos off of the ipod, it still won't show up in itunes.

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod shows up in Windows but not in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • TS3697 My new iTunes does not show me a PHOTOS tab when syncing my iPad 3. It only shows Music, Films and Apps tabs on the top left menu.

    My new iTunes does not show me a PHOTOS tab when syncing my iPad 3. It only shows Music, Films and Apps tabs on the top left menu.
    What am I going to do?

    The Photos tab doesn't appear there. If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
    To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos e.g. :
    If you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
    If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

Maybe you are looking for

  • Do I have to wipe Windows and re-install?

    I have no idea what happened. I boot up in Windows only to access my computer at work via something called SSL-Explorer. That's all I've ever used Windows for on my MBP - there's nothing but Explorer on there, and AVG's anti-virus software. The other

  • R12(Payments)--Accounts Payable Trial Balance Report, Need Info.

    Hi All, We are trying to use the report Accounts Payable Trial Balance Report. This is an XML Report in R12 now and has 4 different RTF Templates. Can you please explain me how this report can be used in R12 and how does it selects the RTF template(

  • Service Level in the Material Master

    Hi - Can the service level field in the material master MRP view be used to drive additional demand independant of safety stock?  Meaning, is there any way I can enter a service level and have it increase demand even if I am not using it to calculate

  • How to populate column titles for y values when using Write to Measurement File Express VI with a tab delimited text-based .lvm file?

    The .lvm file generated by the Write to Measurement File Express VI includes column heading titles for the y values, but they are a default value of "untitled".  See attached example of a sample file when opened in Excel, the values in question are h

  • Original photos

    Do I have to leave the original photo on the hard drive? I deleted them, now when I attempt a slide show iphoto says 'file not found'. Photos still in trash!