Why does my leading zero disappear

I have created a 4 number field.  Why does my leading zero disappear when moving onto the next field.  How can I correct this?
Thanks.

The definition for a field formatted with the "Number" format is to hide the leading zeros.
Have you tried to access the value of the field in JavaScript using the "valueAsString" property and have the field use a format of  "None"?
This is how the SSN and U.S. Postal Zip Codes need to be handled to display the leading zeros.

Similar Messages

  • Why doesn't flash player stay installed and why does the saved file disappear.

    Why doesn't flash player stay installed and why does the saved file disappear.  I have downloaded and installed flash player several times on my Win7 Vaio laptop. I have uninstalled and deleted all versions.  I am the administrator and I have also turned off my Security Software, but the same thing keeps happening over and over.  The Java Script is enabled and I have tried both downloading via IE and firefox.  It is rediculous that it keeps disappearing and I keep getting messages that the newest version is needed.  I am downloading directly from adobe and they say it is the latest.  Getting very frustrated.  They ask if we have any problems when we go to the finish line, but there is no place for comments.  I guess they don't really care if it works or not.

    So is it actually installed, or is it not?  If not, download and run the offline installers:
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    If it still does not work correctly, check
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968
    In Firefox also check if the Shockwave Flash plugin is enabled.

  • Why does a grouped image disappear when I ungroup it?

    Why does a grouped image disappear when I ungroup it?

    There are bugs hanging around for version after version after version. Hopefully it gets fixed but nobody knows when or if a bug will get fixed until it is.

  • Why does my external drive disappear from my desktop?

    I am switching from PC to Mac. I have 2 externaldrives. Both have been formatted in FAT 32 by the MAC. When I plug them in the desktop and finder see them, then with both of them they have disappeared from the desktop and from finder. Still can be seen in disk utility and system profiler. How can I find them and why does this happen?

    If you daisy chained then try without. May not be enough power to handle both at sme time. Other than that read some info:
    1. Shut-down your Mac, and unplug the power cord
    2. Turn the power off on your external FireWire devices
    3. Unplug the FireWire devices from the Mac
    4. Wait for 5 min.
    5. Plug the power cord to your Mac only
    6. For PPC Macs: Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
    7. At the ">" prompt type:
          reset-nvram and hit the Return key
          set-defaults and hit the Return key
          reset-all and hit the Return key
    the last command will restart your mac
    8. Shut down your Mac
    9. Connect all your FireWire devices to the Mac and turn them on
    10. Restart your Mac.
    All your FireWire devices should reapear, if not repeat the procedure
    How to avoid the issue :
    The only really proven way to avoid burning up a FireWire port is to connect all devices and to turn them on PRIOR turning on the Mac. Likely, one must unplug them and turn them off AFTER the Mac has been turned off. If you need to connect another device, then you're on for a shutdown of your machine... 
It's a tad annoying but it guarantees that the FW ports won't be damaged. 
Be careful when using self powered devices such as webcams, iPods, hard drives or hubs, as they can destroy the port pretty easily. Another thing is to avoid daisy-chaining hard drives.
    When the FW port doesn't respond anymore :
    In this case, peripherals won't be mounted upon plugging, and won't be displayed in Apple's System Profiler. The self powered devices will still be fed by the port, but won't respond either. 
It happens that the PHY just hangs after a surge or a random problem. Once hung, the port will not respond any longer, it is possible to reset the component by going through the following steps :
    1° boot the PPC mac in Open Firmware by holding [ Apple key - Option - O - F ] after the startup chime. 
2° you'll get to a command prompt. the keyboard mapping will be QWERTY, so pay attention when you type the following : 
RESET-NVRAM (enter) 
RESET-ALL (enter) 
3° Now the mac should restart itself and the port should function properly again. 
If it still doesn't work, then it means that the PHY is damaged.
    http://www.hardmac.com/articles/16/
    From Kappy post:
    922 is only used in dual drive cases to provide a "build-in firmware RAID support"
    912 or 912+ is FW800, the "+" means USB2
    911 is FW400
    924 adds eSATA support along with FW400/800
    MacSales, OWC Tech Support library is where I would go first, as they do tend to have or links to, firmware updates for Oxford.
    From Wiebetech:
    I just upgraded my Mac OS, and now I'm having trouble with my FireWire device. What can I do?
    A: With nearly every OS update Apple releases, some external drives are not recognized after the update. The typical symptom is that the device will not mount but the volume is visible and grayed out in Disk Utility. This means that the device is working properly, but the OS does not recognize the volume as mountable. Sometimes the drive does not show up at all.
    The first thing to do is to see if repairing Permissions with Apple's Disk Utility First Aid feature solves the problem. If not, try repairing the disk with First Aid. Another possible solution is to zap the PRAM. This is done with a keyboard command while rebooting. Restart your computer and hold down the Command, Option, P and R keys. Consult the Apple web site for details.
    If this does not work, then try pushing the PMMU reset button on the logic board. Consult the Apple web site for locations of the button for your Mac. If the drive still does not show up, shut down, disconnect all peripheral devices, and boot from the Mac OS Installation CD. The later the OS version, the better. Do not reinstall the OS, but when the Installer is loaded up and ready to begin, go to the File menu and use the Disk Utility program. Connect the drive that is having problems, then start the Disk Utility application. If you see the external drive and it is not grayed out, you know the drive is okay. Run Disk First Aid on it anyway. Then run it on your internal boot drive while you are at it. When done, unmount the external drive and UNPLUG it! Then restart the Mac.
    When the Mac has restarted and is running on the internal boot drive, reconnect the external drive.

  • HT3737 Why does the Safari toolbar disappear when the cursor is not on it ?

    Why does the Safari tool bar disappear when the cursor is not pointed to it?
    How can I fix it ,Please.

    It sounds like Safari is displaying in 'full-screen'. To reveal the tool bar move the mouse pointer to the top right-hand corner of the screen. You should see two blue arrows, click on those and it should take it out of full-screen mode and leave the menu bar, tool bar, etc. permanently on view.

  • Why does the AirPlay selection disappear with iTunes radio?

    Usually there is a selector icon next to the volume slider at the top of the iTunes window that lets you choose among speakers and airplay devices. Why does this icon disappear when an iTunes radio station starts playing? After doing some trial and error, the option only disappears for certain stations.

    I used iTunes open stream at http://kera-ice.streamguys.us/keraliveaacplus.m3u
    works fine

  • Why does the Send button disappear on iCal invites?

    Just to premise this post with the fact that this is from our networked work server, all running Macs on 10.6.7 and using iCal 4.0.4. I'm writing this on behalf of a colleague.
    When she goes to send invites to events like Board/Committee meetings in iCal, the "Send" button often disappears. The title is there, there's a day/time and location, and the contacts are pulled from her Mail/Address Book contacts. Sometimes the send button stays as it should, and other times it disappears after a few seconds, with no way to bring it back up. So sometimes she tries to add a group of contacts and immediately hit Send before it disappears - but this often leads to typos or mistakes due to her rush.
    Although I've used a Mac as my primary computer for years, I've never really used iCal much, so I didn't know how to help directly.
    Any reasons why the Send button would not be showing? I was thinking perhaps it was an issue with the contacts, but they come directly from her daily Mail/Address Book. I saw her go through the steps - it doesn't appear she's missing anything. Any help would be great.

    perhaps you could post a screen capture of that?
    Does it work if you hold shift while you start Thunderbird?

  • Why does my cursor keep disappearing on Firefox (and nothing else) when it's not being moved?

    If I'm not moving the cursor it disappears entirely, which is highly annoying. It only does this on Firefox, nothing else. It went through a permanently flickering period before this, too.

    Thanks for the advice, AmazingBeast - I think that probably would have worked. I isolated the problem eventually to a particular web page I'd been using a lot and had kept open. Once I closed it everything was fine again, although it means whenever I want to look at that page I have to put up with the Disappearing Cursor!

  • Why does my cropped image disappear?

    After importing a jpeg file into my pages document, I have tried repeatedly to crop ("mask") the unwanted portions of the image. When I am finished applying the mask, I have double-clicked on the image--exactly as the "help" page instructs--and the image completely disappears, leaving only the masked portion. I have tried double-clicking on the image, on the mask, on an area outside of the image and mask, and on the "edit" symbol below the mask. Every time the image disappears. What am I doing wrong?

    If you have masked it:
    Menu > Format > Mask with Shape > Choose
    don't you expect that the masked area is all that you will see when you are finished?
    There are several selections in the masking:
    1. The mask (Shape) itself, clicking on the mask handles you can size it
    2. The image which may or may not extend outside the mask. Clicking outside the mask, you get a grabber hand and can drag the image around inside the mask or resize it from the images handles
    3. The cropped image dragging on the corners or sides resizes the mask & the contents
    Clicking away from the image, sets the last edit.
    Possibly the image is very large and you are only seeing a tiny portion of it, say a corner.
    Have you clicked on the little and big icons in the Edit bar to rescale it as necessary?
    Peter

  • Why does bridge_scripting forum link disappeared from bridge forum?

    I know this photoshop forum, but... I need to create this discussion here.
    When I go here: http://forums.adobe.com/community/photoshop
    I have a link to Bridge Forum (http://forums.adobe.com/community/bridge?view=overview).
    But I can't find anymore the link to bridge_scripting forum.
    Although, it exists and it is alive:
    http://forums.adobe.com/community/bridge/bridge_scripting
    Does this mean that scripting development within Bridge will be abandoned?
    Why?
    And all the UI bugs cs6 and cc have in Bridge scripting won't be corrected? That's it and period?
    This doesn't make sense.
    Why there is no more clear information regarding this?
    And, yes, I have already signed this comment on http://feedback.photoshop.com/photoshop_family
    several times and nothing for months.

    When i was trying to find bridge_scripting forum, and i didn't remember the adress anymore (I was on another computer) I did as I have done some time before.
    I went to bridge general forum:
    http://forums.adobe.com/community/bridge?view=overview
    and i search down on the right column for the link to bridge_scriting forum.
    I doesn't exist anymore and it was there before.

  • Why does data validation not disappear immediately on protected sheet, bug?

    I have provided a link to a workbook.
    Cell A1 contains data validation. The macro contains one sub that removes the data validation from Cell A1. However, the data validation won't be removed until you first run the macro and then click on another cell and then click on A1 again.
    However, if the sheet was not protected, data validation would get removed immediately by the macro, without the need to navigate to a different cell.
    Why is it like this? Is this a bug?
    Workbook with data validation in A1 of protected sheet and a macro to remove it

    Hi JP3O,
    Base on my test in Office professional Plus 2013 (15.0.4569.1506), it works fine.
    Check the worksheet is protected
    Select A1, the dropdown icon will display
    Run/Debug the macro, the dropdown icon will be disappeared.
    What’s the version of your Office? Could you reproduce that issue in other machine?
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why does my library keep disappearing??

    Ok, this is happening on a regular basis - I save all my music to an external HDD through iTunes, but sometimes when I start up iTunes the whole library has disappeared and in the Advanced tab, my file save location has reverted back to the C drive, meaning I've got to reload everything (and as I've now done this a number of times means I've got some files duplicated up to 7 times), and it also takes ages as I've got quite a bit of stuff.
    It only does it on my area though, the wife's area is fine...
    To say I'm getting narked off by it is a bit of an understatement, any help greatly appreciated!
    Oh I'm using Vista btw

    If you take the time to read the posts in this older thread, there are several ways around it
    http://discussions.apple.com/message.jspa?messageID=8537277

  • Why does my email signature disappear when i send pictures?

    i am having issuer with sending pictutres via email.
    if i use the insert image i can only select a single image at a time ... slow..
    so to avoid this time waste i go to pictures, select the images i want and click share via mail option
    and the images appear along with my signature line.
    when the mail is recieved my signature has disappeared.
    why?
    kenny

    This is the step that I took after inputting my signature.
    On the right, after saving my document, I click "Get Others to Sign."  I was confused because it says that it's powered by EchoSign.  Like I stated before, my clients are able to sign this document when I send it to them, but it is returned to me with their signature (not in the signature field, but at the end of the document), and my signature is missing.  I tested this on myself - my signature is missing when they receive it. 

  • Why does my adobe flash disappear?

    I recently updated my adobe flash to the new version 11.9 ...(yeah whatever ) and i want to use it to make cartoons and stuff but i can't find it I mean the instalation went well everything was fine and it just disappeared I'm not sure if before I could open it but I really need it so I read about those problems and uninstalled and installed and restarted my computer and oh by the way my computer is windows xp 32bit and I mostly use Mozilla firefox I think 25 but it just does not appear.. Please tell me something easy to do (like delete every adobe thing I have and reinstall it or I dont know what..) So yeah thanks :))

    Download the following files by right clicking and selecting "Save target as" or "Save Link as"
    Flash Player Uninstaller
    Shockwave Player Uninstaller
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Save ALL files to your Downloads folder - DO NOT RUN anything yet.
    Reboot your system.
    BEFORE opening anything else, go to your Downloads folder and run the UNINSTALLERs to remove all instances of Flash Player and Shockwave.
    Next, run the ActiveX Installer.
    Lastly, run the Installer for other browsers.
    Once Flash Player is installed go to: http://www.adobe.com/shockwave/download/alternates/#sp
    Download BOTH files, the one on the right FIRST by right clicking and selecting "Save target as"... the other by clicking and following the steps to download the FULL ActiveX installer.
    If you're developing Flash Content (like cartoons) and you want to "test" them, you should use the Flash Player 11.9 Projector. It's a standalone version of Flash Player for just that purpose.

  • Why does my mouse pointer disappears when hovering over Firefox?

    When I'm over the Firefox window, my mouse pointer disappears, unless I'm typing or actively using my mouse.
    == This happened ==
    Every time Firefox opened
    == This morning after updating to the latest version, but before I had restarted Firefox to fully install the new version.

    it seems that flash player is causing this problem because when i disable it, everything is fine. i even tried to install older versions of flash player (9.+) but pointer still starts to disappear. i'm using Windows XP. it happens on the both of my computers and it started at the same time (during the last week) i don't know what to do next..
    thank you in advance

Maybe you are looking for