Why does my mac book pro 2012 15" w/ retina display run slow during a video game and then an SMC reset seems to fix it temporarily?

When I begin to play Diablo 3 with my fairly new 15" mac book pro with retina display, every now and then my computer will be really laggy when playing it (frame rate of under 5). Normally its performance is really fast with a frame rate of about 40-60 frames per second depending on the resolution used. When this happens I have performed a SMC reset and it fixed the problem. However, every few days it will act up again and I will have to do an SMC reset again. It has now happened again for the third time and I am affraid to continue to perform an SMC reset, is this bad for my computer? Should I take it in and have them trouble shoot it? Any help would be greatly appreciated to figure out what is wrong. Thanks.

So this is what I got when I took my computer into the apple store to have it diagnosed.
After the apple technician performced several tests, the only thing that fixed the issue was an SMC reset. Based on this he figures it is probably a software or firmware issue that is going on. He is a little concerend how ever that the fans of the comupter don't reach maximal rpm when the computer is displaying the issue. So he recorded the problem, and told me to just perform the SMC reset as needed for the next couple months and wait for a new update from apple. If the issue persists I am to go back to the apple store and they will take the appropriate steps.
He said an SMC reset doesn't hurt the computer in any way, so its safe to do. I am gonna contact blizzard and let them know about the issue as well because if it is software, it could be their game (Diablo 3) that is causing the issue as well. If I hear of anything new i will let you know. So get on the blizzard form and let them know of the issue to fix the problem faster.
Thanks for your help,
Tetrault

Similar Messages

Why does my mac book pro have a revolving circle constantly running on my screen?

My computer never used to do this but now, there is always a revolving circle running on my desktop. What does this mean?

Nevery mind - it was because I was runnign iMOVIE.

Why does my Mac Book pro keep restarting

why does my Mac Book pro keep restarting and how can it be fixed

It would be nice if you could include a kernel panic log to verify that your problem is...
Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton

WHY DOES MY MAC BOOK PRO SHUT OFF ON ME? SO FAR THE INFO I GOT 4 IT IS A MAC OS X VERSION 10.7.3 THE PROCESSOR IS 2.4 GHZ INTEL CORE 2 DUO MEMORY IS 2 GB 667MHZ DDR2 SDRAM I DON'T KNOW HOW OLD IT IS BECAUSE I BOUGHT IT USED SORRY I HOPE THIS HELPS THANK Y

WHY DOES MY MAC BOOK PRO SHUT OFF ON ME? SO FAR THE INFO I GOT 4 IT IS A MAC OS X VERSION 10.7.3 THE PROCESSOR IS 2.4 GHZ INTEL CORE 2 DUO MEMORY IS 2 GB 667MHZ DDR2 SDRAM I DON'T KNOW HOW OLD IT IS BECAUSE I BOUGHT IT USED SORRY I HOPE THIS HELPS THANK YOU

Sounds to me like you may have gotten a machine with hardware issues, but it's hard to say. It will shut down if it gets too hot, but that's not a normal occurrence. I have never seen a MacBook Pro shut down due to heat, even after lengthy 3D gaming sessions where the fans are running fast and the bottom of the machine is unpleasant to touch.
First thing I would try to do is reset the SMC. If that doesn't help, erase the hard drive and reinstall the system from scratch, which you should always do with a used machine anyway.
If a fresh system doesn't help, you'll need to get it checked out by Apple.
Edit: Oh, and sig is absolutely right... please don't post in all caps! It's very irritating.

Why does my Mac book pro Mid 2010 Not air Play?

Why does my Mac book Pro, Mid 2010 Model Not air play with the new Mountain Lion?

davenug,
given how much we currently know about your MacBook Pro, why do you think that we would know the reason? Please help us to help you by providing relevant information about your MacBook Pro — which model is it? Which version of OS X is installed on it? Is its battery fully charged? Is its AC charger working properly? &c.

WHY DOES MY MAC BOOK PRO SHUT OFF ON ME?

WHY DOES MY MAC BOOK PRO SHUT OFF ON ME?

DAKINGGOD wrote:
WHY DOES MY MAC BOOK PRO SHUT OFF ON ME?
Not much to work with here...
How about more info so a diagnosis and help can be formulated? Mac model (size), RAM, OS version, age, battery status? What are you doing when it happens? How often? And if you want to be really abundant, pertinent logfiles?

Why does my mac book pro not show in 1080p on my flat screen

why does my mac book pro not show in 1080p on my flat screen. My mac bookpro always showed in 1080p on a Sanyo Plasma screen. Now when I connect mac book pro I get a blank screen. It will display in 720 but not 1080p. Also will show in 1080i but pictures flicker.

davenug,
given how much we currently know about your MacBook Pro, why do you think that we would know the reason? Please help us to help you by providing relevant information about your MacBook Pro — which model is it? Which version of OS X is installed on it? Is its battery fully charged? Is its AC charger working properly? &c.

Why does my mac book pro freeze when using photo shop

Why does my mac book pro freeze a lot when using photo shop?

What version of Photoshop are you using?
Clinton

Why does my mac book Pro pick up wifi but my new ipad wont in the exact same position in my house?

I sit in my lounge with my mac book pro and it picks up my home wifi perfectly yet when i sit with my ipad, sometimes it works and picks it it but then at times it looses the connection and I cant find the hub?? why is this and is there anything I can do to stop it from happening?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why did my Mac book pro 2012 literally slow to a crawl overnight?

Hello,
Im new to Mac products so bear with me
I'm running an OS X 10.9.1 13 Mac book pro with 4 GB of memory. I can usually play video games, and edit videos with it. And overheating has never been a problem.
Today alll the applications are taking 30-40 seconds to open and even longer to click between tasks. Sometimes i see a beach balll, but generally the notebook just seems to not respond. The boot time seems to have increased too.
Disk check - Hard drive scan showed no problems and I have over 30% Disk space left
Disk repair permissions - It took about an hour and repaired some stuff. But still slow
Activity monitor
kernel_task 1.9% and activity monitor 0.6%
user % 0.3, System 0.5% and idle 99 %
Read in/sec 0
Read out/sec 0
Physical Memory: 4GB
Memory used: 3.46 GB
File cache: 1.52GB
Here are the last 40 lines from my system log
2/23/14 2:14:23.085 PM com.apple.SecurityServer[15]: Session 100021 destroyed
2/23/14 2:14:57.868 PM com.apple.SecurityServer[15]: Session 100023 created
2/23/14 2:15:11.941 PM WindowServer[97]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7f9a0bf0dcc0(2001)
2/23/14 2:15:11.965 PM WindowServer[97]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7f9a0bf0dcc0(2001)
2/23/14 2:15:25.556 PM com.apple.SecurityServer[15]: Killing auth hosts
2/23/14 2:15:25.556 PM com.apple.SecurityServer[15]: Session 100022 destroyed
2/23/14 2:16:39.323 PM WindowServer[97]: CGXDisplayDidWakeNotification [4496664883295]: posting kCGSDisplayDidWake
2/23/14 2:16:39.324 PM WindowServer[97]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/23/14 2:16:44.456 PM launchctl[424]: launchctl: Dubious ownership on file (skipping): /Library/LaunchAgents/com.gspy.koneXTD.Daemon.plist
2/23/14 2:17:18.157 PM launchservicesd[55]: Ignoring notification of asn=[ 0x0/0x20020] pid=426 because it matches an existing app App:NULL or App:"Notes" asn:0x0-1f01f pid:426 refs=6 @ 0x7f8081614750 : LASApplication.cp #883 CreatePendingApplication() q=LSSession 100004/0x186a4 queue
2/23/14 2:17:18.826 PM launchservicesd[55]: Ignoring notification of asn=[ 0x0/0x1e01e] pid=426 because it matches an existing app App:NULL or App:"Notes" asn:0x0-1f01f pid:426 refs=6 @ 0x7f8081614750 : LASApplication.cp #883 CreatePendingApplication() q=LSSession 100004/0x186a4 queue
2/23/14 2:17:29.091 PM com.apple.SecurityServer[15]: Session 100024 created
2/23/14 2:19:28.172 PM WindowServer[97]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7f9a0bf0dcc0(2001)
2/23/14 2:19:28.191 PM WindowServer[97]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7f9a0bf0dcc0(2001)
2/23/14 2:21:11.273 PM WindowServer[97]: CGXDisplayDidWakeNotification [4768613493229]: posting kCGSDisplayDidWake
2/23/14 2:21:11.274 PM WindowServer[97]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/23/14 2:22:10.196 PM WindowServer[97]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
2/23/14 2:22:17.090 PM WindowServer[97]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 7.89 seconds (server forcibly re-enabled them after 1.00 seconds)
2/23/14 2:22:58.825 PM WindowServer[97]: disable_update_timeout: UI updates were forcibly disabled by application "Activity Monitor" for over 1.00 seconds. Server has re-enabled them.
2/23/14 2:22:59.000 PM kernel[0]: Network delay is not specified! Defaulting to 0x384
2/23/14 2:23:00.724 PM WindowServer[97]: common_reenable_update: UI updates were finally reenabled by application "Activity Monitor" after 2.90 seconds (server forcibly re-enabled them after 1.00 seconds)
2/23/14 2:23:07.929 PM com.apple.IconServicesAgent[229]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/CoreServices/Dock.app/Contents/XPCServices/com.apple.dock .extra.xpc/
2/23/14 2:23:08.536 PM com.apple.IconServicesAgent[229]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/PrivateFrameworks/InternetAccounts.framework/Versions/A/X PCServices/com.apple.internetaccounts.xpc/
2/23/14 2:23:09.148 PM com.apple.IconServicesAgent[229]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/XPCServic es/com.apple.ShareKitHelper.xpc/
2/23/14 2:27:53.101 PM WindowServer[97]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7f9a0bd67d90(2001)
2/23/14 2:27:53.119 PM WindowServer[97]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7f9a0bd67d90(2001)
2/23/14 2:29:08.634 PM WindowServer[97]: CGXDisplayDidWakeNotification [5245972462570]: posting kCGSDisplayDidWake
2/23/14 2:29:08.635 PM WindowServer[97]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/23/14 2:34:57.486 PM WindowServer[97]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7f9a0be89340(2001)
2/23/14 2:34:57.503 PM WindowServer[97]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7f9a0be89340(2001)
2/23/14 2:35:01.526 PM CalendarAgent[165]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1005 "The network connection was lost." UserInfo=0x7feba2648150 {NSUnderlyingError=0x7feba24b7430 "The network connection was lost.", NSErrorFailingURLStringKey=https://SHEEP%[email protected]/dav/SHEEP/Inbox/, NSErrorFailingURLKey=https://SHEEP%[email protected]/dav/SHEEP/Inbox/, AccountName=Yahoo!, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The network connection was lost.}]
2/23/14 2:35:01.531 PM CalendarAgent[165]: [com.apple.calendar.store.log.caldav.queue] [Adding [<CalDAVAccountRefreshQueueableOperation: 0x7feba24b8060; Sequence: 0>] to failed operations.]
2/23/14 2:39:26.513 PM xpcproxy[455]: assertion failed: 13B42: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
2/23/14 2:39:32.079 PM WindowServer[97]: CGXDisplayDidWakeNotification [5869414010683]: posting kCGSDisplayDidWake
2/23/14 2:39:32.080 PM WindowServer[97]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/23/14 2:40:10.349 PM Console[458]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
2/23/14 2:45:31.910 PM WindowServer[97]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7f9a0bf0cef0(2001)
2/23/14 2:45:31.927 PM WindowServer[97]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7f9a0bf0cef0(2001)
2/23/14 2:45:44.430 PM WindowServer[97]: _CGXHWCaptureWindowList: No capable active display found.
2/23/14 2:47:18.070 PM WindowServer[97]: _CGXHWCaptureWindowList: No capable active display found.
2/23/14 2:47:25.557 PM WindowServer[97]: CGXDisplayDidWakeNotification [6342890267747]: posting kCGSDisplayDidWake
2/23/14 2:47:25.558 PM WindowServer[97]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/23/14 2:56:55.548 PM WindowServer[97]: disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
2/23/14 2:57:09.548 PM WindowServer[97]: disable_update_likely_unbalanced: UI updates still disabled by application "Console" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
2/23/14 2:57:26.996 PM WindowServer[97]: common_reenable_update: UI updates were finally reenabled by application "Console" after 32.45 seconds (server forcibly re-enabled them after 1.00 seconds)
2/23/14 2:57:27.008 PM Console[458]: void CGSUpdateManager::log() const: conn 0x12687: spurious update.
I heard some people could interpret this. I'm currently using a library PC cause typing on my Mac would take eons......its that slow
can anyone help?

Please don't post "etrecheck" output in a reply to me. I have no use for it.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|Genesy|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Why does my mac book pro screen go black when it goes to sleep and then will not light up again unless I unplug the power cord

When I either leave my mac book pro open, but idle long enough for it to go to sleep or close the top and put it to sleep, the only way to light up the screen again is to diconnect the mag. connect power cord. Any ideas why and/or how to correct this problem?

So this is what I got when I took my computer into the apple store to have it diagnosed.
After the apple technician performced several tests, the only thing that fixed the issue was an SMC reset. Based on this he figures it is probably a software or firmware issue that is going on. He is a little concerend how ever that the fans of the comupter don't reach maximal rpm when the computer is displaying the issue. So he recorded the problem, and told me to just perform the SMC reset as needed for the next couple months and wait for a new update from apple. If the issue persists I am to go back to the apple store and they will take the appropriate steps.
He said an SMC reset doesn't hurt the computer in any way, so its safe to do. I am gonna contact blizzard and let them know about the issue as well because if it is software, it could be their game (Diablo 3) that is causing the issue as well. If I hear of anything new i will let you know. So get on the blizzard form and let them know of the issue to fix the problem faster.
Thanks for your help,
Tetrault

Why does my mac book pro have a blue screen when booting up for a second just before the login screen

When turning on my Mac Book pro before it get to the log in screen it has a blue screen for a couple of second the goes to the login sreen. It seams to take some time to complete the login to my computer.
can anybody give me some help with this problem.
Thank you

The cable connections have (so far) solved this problem for my situation. Even though the monitor's DVI cable was firmly connected to the mini Display port connector, when I touched it the attached monitor would go 'blue' or lose its connection entirely. After disconnecting and reconnecting this junction the monitors would still take a hit on touching the connection. I also checked the connection of the mini Display port connection to the graphics board and could not push it in any further. However, after a second go-round I unplugged this connection to the board and reconnected it. I am certain it was fully inserted the first time. But, connection contacts can oxidize over time and sometimes it may just need to be disconnected and reconnected to 're-wipe' the connections. This effectively cleans them at the point of contact. So in my case I'm thinking it was the connection age that was an issue more than a 'loose' connection. Either way, I haven't had this issue for the past two weeks.

Why does my Mac Book Pro get so hot?

My Mac Book Pro gets hot whenever i use it for awhile and i am wondering what could be causing the "over heating"
I just bought my Mac about a month ago, it is the 13 inch with the intel core i7 processor.

Hot is a relative term. Go on the Internet and download iStat pro, a widget that monitors the internal temperatures and fan speeds of your MBP. When you get accurate numerical data then you will be able to determine if there actually is a problem.
Yes the MBPs do get warm which is good because that is dissipating the internal heat being generated by the internal components. The heat to a large degree is a function of the applications you are using, such as video games will require more CPU resources than emails, thus generating additional heat.
Bear in mind that the MBP has internal heat sensors that will shut the unit down if it starts to over heat thus preventing the MBP committing Hari Kari.
Ciao.

My Mac book pro has all the sudden started running slow and freezing up all the time , any ideas why or what to do

Hello ,
I am not very good with tech things , I have a Mac Book Pro and have had it for almost two years with no problems. Now for the past week or so it has started running extremely slow and freezing up all the time. I am not really sure what is going on but is there any advice on something to do or any idea what could be wrong.

My MacBook Pro is running very slow.
EtreCheck version: 2.2 (132)
Report generated 5/6/15, 9:40 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2009) (Verified)
    MacBook Pro - model: MacBookPro5,3
    1 2.66 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 63 - SN = W05024HXDBWZA
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
    NVIDIA GeForce 9600M GT - VRAM: 256 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 3:9:20
Disk Information: ℹ️
    Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macbook Pro (disk0s2) / : 319.08 GB (53.55 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-868
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Built-in iSight
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/TechTool Pro 8.app
    [not loaded]    com.micromat.driver.spdKernel (1 - SDK 10.10) [Click for support]
    [not loaded]    com.micromat.driver.spdKernel-10-8 (1 - SDK 10.10) [Click for support]
        /Library/Checkmate/CheckmateWorkerDaemon.app
    [not loaded]    com.micromat.driver.SPDKernel (1 - SDK 10.8) [Click for support]
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    StartOuc: Path: /Library/StartupItems/StartOuc
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
    [running]    com.micromat.CheckmateAgent.plist [Click for support]
    [running]    com.micromat.TechToolProAgent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.adobeupdatedaemon.plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.micromat.CheckmateIdleDaemon.plist [Click for support]
    [loaded]    com.micromat.CheckmateWorkerDaemon.plist [Click for support]
    [running]    com.micromat.TechToolProDaemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.bittorrent.BitTorrent.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    MagicMenu    Application (/Applications/StuffIt Archive Manager.app/Contents/MacOS/MagicMenu.app)
    Google Drive    Application (/Applications/Google Drive.app)
    AdobeResourceSynchronizer    Application (/Applications/Adobe/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    RealPlayer Downloader Agent    Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
    Garmin Express Service    Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 40 Check version
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    AdobeAAMDetect: Version: 3.0.0.0 - SDK 10.9 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
    GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    RealPlayer Plugin: Version: Unknown [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    searchtab
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    TechTool Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macbook Pro: Disk size: 319.08 GB Disk used: 265.52 GB
    Destinations:
        Rat Drive [Local]
        Total size: 249.72 GB
        Total number of backups: 4
        Oldest backup: 2014-11-12 00:25:11 +0000
        Last backup: 2015-01-08 09:48:54 +0000
        Size of backup disk: Too small
            Backup size 249.72 GB < (Disk used 265.52 GB X 3)
Top Processes by CPU: ℹ️
        11%    mds_stores
         6%    Google Chrome Helper(13)
         4%    Google Chrome
         2%    RealPlayer Downloader Agent
         1%    WindowServer
Top Processes by Memory: ℹ️
    1.52 GB    Google Chrome Helper(13)
    723 MB    kernel_task
    442 MB    softwareupdated
    188 MB    Google Chrome
    139 MB    mtmd
Virtual Memory Information: ℹ️
    1.24 GB    Free RAM
    6.76 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 6, 2015, 08:33:36 PM    /Library/Logs/DiagnosticReports/mtmd_2015-05-06-203336_[redacted].cpu_resource. diag [Click for details]
    May 6, 2015, 06:25:14 PM    Self test - passed
    May 6, 2015, 06:23:47 PM    /Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-06-182347_[redacted].cra sh
    May 5, 2015, 02:54:50 PM    /Library/Logs/DiagnosticReports/firefox_2015-05-05-145450_[redacted].cpu_resour ce.diag [Click for details]
    May 5, 2015, 11:51:54 AM    /Library/Logs/DiagnosticReports/discoveryd_2015-05-05-115154_[redacted].crash
    May 4, 2015, 04:42:23 PM    /Library/Logs/DiagnosticReports/discoveryd_2015-05-04-164223_[redacted].crash

HT1349 why does my mac book pro start up but contunitues to try to load

can someone help with my mac book it starts up logo appeares then the busy signel conuines to try to load but nothing happens?

Try starting your Mac in Safe Mode.
Restart your Mac.
Press and hold down the Shift key immediately after hearing the startup tone. Be sure NOT to press the Shift key before the tone.
Release the Shift key when you see the Apple logo and the spinning-gear appear.
When the Login Window appears, log into your account.
If you Mac starts up, then the issue may be a problem with one of the Startup items, Login items, or a 3rd-party kernal extension (if you got a kernal panic screen during startup.)
If your Mac does not start up, use the Startup Manager to see if the startup disk is detected. Note: By default the startup disk is Macintosh HD.
Try running the Apple Hardware Test. This test is included on the Installation CD that came with your Mac.

Why does my mac book pro 2012 15" w/ retina display run slow during a video game and then an SMC reset seems to fix it temporarily?

Similar Messages

Maybe you are looking for