Why does my mac no longer support Windows 8?

So, about 2 years ago, I used BootCamp to partition my macbook (13-in mid-2010). I had Windows 8 installed on the partition, and it was working fine. I upgraded to Windows 8.1 and began experiencing problems, so I decided to start over with Windows 8. The only problem is that when I closed out that partition and started a new one, BootCamp informed me that my mac only supports Windows 7, despite having had Windows 8 installed on there just hours before. What happened to make my mac stop supporting 8, and how can I fix this?

You used an earlier version of Bootcamp Assistant to install Windows. What is the current version of BC Assistant on your machine?

Similar Messages

Why does my mac take longer to go to sleep

Hi
I wonder if anybody has experienced their macs taken longer to close down the screen when put to sleep.
When I used to hit sleep, macs screen would disappear immediately, now it stays on for 30 secs or more than shuts down.
My mac is running Snow Leopard 10.6.8.
Any ideas?
Thanks

Hi seawindtalker,
I'm sorry to hear you are having these issues with your Mac. If you continue to have sleep delay issues, you may find the information and troubleshooting steps outlined in the following article helpful:
OS X: When your Mac doesn't sleep or wake - Apple Support
Regards,
- Brenden

HT204057 Why does Time Machine no longer support external hard drives connected to an Airport Extreme base station?

I'm pretty sure that upto a few months ago I had a hard disk connected via USB to my Airport Extreme and I was able to backup all the computers on my home network. However, somehow over the last few months this had stopped happening. I am not able to select my network disks for time machine backup.
There is a very unhelpful sentence on Apple's website which simply says it does not allow backup to hard disks connected to Airport Extreme via USB. Does anyone know why this is? Is there a way around this? Can I connect a drive to my desktop computer and have other computers backup through the network to that?

This was never an approved configuration: OS X Mountain Lion: Disks you can use with Time Machine
Can I connect a drive to my desktop computer and have other computers backup through the network to that?
The above KB article indicates you can, though I have not personally tried it.

Probably a noob question, but why does the Mac OSX volume control window...

...randomly pop up sometimes. I think I'm triggering it, but I don't know how.

It pops up when you use a dock and control the volume or when your sliding volume and you press the Home button. Its there so you won't have to navigate to the Music app and see the volume

On my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

on my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

It depends on the size of the attachment and the speed of your internet connection.
Next time you send an email with an attachment do these two things:
In Apple Mail (I assume you are using Apple Mail), under the Window menu select Activity. Arrange the Activity window so you can see it.
Then open the separate application located in the Utilities folder called "Activity Monitor" and arrange it so you can see it at the same time as the Activity window in Mail.
In Activity Monitor program, select the tab labeled "Network." Watch the "Data sent/sec" portion. Then send your email, while watching the Mail Activity window and also the Activity Monitor program window Data sent/sec area.
You should see the mail being sent with a progress bar in the Mail Activity window and also you should be able to see how many bytes/sec or KB/sec or MB/sec your internet connection is giving you in the Activity Monitor window.
Example: my internet provider gives me about 20 Megabits per second download and 5 Megabits per second upload. To convert these to Megabytes per second (Activity Monitor shows things in bytes, not bits), simply divide by 10 (not the exact thing to do, but close enough). So I get 0.5 Megabytes per second upload speed. When I send a file that is 5 Megabytes in size, it takes about 10 seconds if I am getting the full upload bandwidth. If I am getting less than that (which sometimes happens), it will take proportionately more time. Either way, you can see what is happening with these two windows.
If your internet provider is supposed to give you, say, 5 Megabits/sec upload (0.5 Megabytes/sec), but you see only say, 5 KB/sec (=0.005 Megabytes/sec), sent in Activity Monitor, then your emails are taking a long time because you are getting only abut 1/100 the speed you should be. You might want to check with your internet provider about that.

Why does it take so long to download software like Adobe to a Mac laptop

I just recently bought a MacBook Pro and I am installing Adobe Reader and it is taking sooooo long to install. I have been installing since 8:30 pm and its now 10:27 and its only up to 42%. Why does it taking so long? Also I have downloading other software and it took forever as well. Why does it take son long to download software to the Mac?

Something is obviously wrong.
Stop the download and take the machine back to Apple as you have 90 days free support.
They will test the machine to see if it's a hardware issue or a problem with the Mac itself.
If they say it's fine and it surfs/downloads fast on their connections, then it's likely something wrong with your home network or router.
Did you by any chance change your DNS settings in Network?
This could be the problem, delete what you entered and reboot the machine, the ISP's default DNS settings will return.
To OpenDNS? On the router? Are you using your own router of it someone managing it for you?
Are you over 21 and can you legally surf for adult sites? If some sort of filtering is on, this could be the cause.
OpenDNS doesn't have servers everywhere, so it causes certain downloads from Akamai servers to come from a lot farther away than your ISP servers.
Have you run Internet speed tests? Using other machines on your network are they fast?
Is your router or modem old? Did you power them off, wait 30 seconds and power them back on?
It's rather a lot to try to figure out network issues, you may have to call in a local professional.

HT6099 why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all 120Hz. So much for future proof.

why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all >120Hz. So much for future proof.

http://en.wikipedia.org/wiki/4K_resolution
http://en.wikipedia.org/wiki/4K_UHD
http://www.techradar.com/news/home-cinema/high-definition/4k-tv-resolution-what- you-need-to-know-1048954
Need More Pixels? Samsung’s 2014 UHD TVs Ship This Month
Wall Street Journal · 2 hours ago
Samsung’s 2014 lineup of Ultra High-Definition (aka 4K) TVs are on the way, and thanks to UHD content deals struck with Fox and Paramount—not to mention the…
Focusing on TVs and 1080p and 60Hz isn't the question, or the 'future'

Why does my MacBook come up with window saying "setting Up Mac" when I turn it on and enter my password and stays there and does not go any further

Why does my MacBook come up with window saying "setting Up Mac" when I turn it on and enter my password and stays there and does not go any further

You may want to put this question on the MacBook community forum to get a better response.
https://discussions.apple.com/community/notebooks/macbook

TS4223 why does it take SO LONG to transfer a movie form my Mac to Apple TV. It tales like an hour. I cannot stream it in the meantime. Very frustrated.

why does it take so long to transfer a movie form iMac to apple TV hard dirve. This is crazy. it takes like an hour to move a movie that i rent on itunes on iMac to our apple TV. i am so tired of this i don't know what to do...

I have the exact same problem. I purchased apple tv several years ago, and every time I go to rent or buy a movie it takes anywhere from 3 to 7 hours to download the movie. There is no spur of the moment "hey lets rent a movie tonight" because I know it will take overnight to complete the download. I've checked my internet speed and it spot on. I've noticed other threads with people having the same problem but no one seems to have a solution.

Why does my Mac Mini running on Mavericks so slow to start and load apps?

Why does my Mac Mini running on Mavericks take so long to start and load apps?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Why does it takes so long to download the new version of Itunes?

why does it takes so long to download the new version of Itunes?

Since you cannot download iTunes on an iPod touch, this would not seem to be the correct forum for this question. I'd suggest you post full details of your problem in either the iTunes for Mac forum or the iTunes for Windows forum, as applicable to your system.
Regards.

HT4356 why does it takes so long for my ipad to connect to my air printer i have a up to date bt router

why does it take so long for my ipad to connect to my air printer when i need to print something i have a up to date bt router.

Good Afternoon Geraldine,
I understand you are wondering why you did not receive an email receipt instantly for an iBook purchase made on March 2nd. Is this the first time you've noticed a delay? I would suggest contacting the iTunes Support team to report the issue. With your permission, they can access your account and possibly shed some light on this particular transaction.
See your purchase history in the iTunes Store - Apple Support
https://support.apple.com/en-us/HT204088
Report a problem with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store - Apple Support
https://support.apple.com/en-us/HT204084
Regards,
Judy

Why Does It Take So Long To Detect Proxy Settings?

Windows 7 Ultimate x64 with all patches
Internet Explorer 10 with all patches
The first time I start Internet Explorer after booting it takes a very long time (>30 seconds) to detect proxy settings. There is nothing else running on this machine. I have this problem if IE is the first thing I open after booting.
Why does it take so long and how can I speed this up?
http://www.saberman.com

Hi,
Was your issue resolved?
No
If yes, we will archive this thread temporarily.
No
If no, please reply and tell us the current situation.
No
If you have any other question, feel free to contact us. We will try our best to help you.
The thread was marked as answered eventhough it wasnt'. What more can I say.
If you have any feedback on our support, please click
here
Here goes to a dead letter mailbox.
Karen Hu
TechNet Community Support
http://www.saberman.com

Why does my mac sleep before I can put in the password?

why does my mac sleep before I can put in the password?

So you press the Power button to start up the machine, it goes through the startup process, the login window appears, and the machine sleeps before you can enter your password? Do I understand the problem correctly?
Is the battery fully charged? Is the LED on the MagSafe plug lit, and if so, is it green or orange?
If the adapter plug is not lit, rest the SMC:
http://support.apple.com/kb/HT3964
If it still doesn't light after that, troubleshoot the AC adapter:
http://support.apple.com/kb/TS1713
Post back with answers to the above questions and any results from the SMC reset or adapter troubleshooting.

Why does my Mac Pro try to start up from a blank drive?

I fitted a 2nd drive to my 2006 Mac Pro in anticipation of dual booting Windows (not done yet). The dive is FAT formatted but is empty. Why does the Mac Pro try to boot up from that drive every time I start it up, despite having set the startup disc as OS X in the System Prefs?! Getting sick of seeing the flashing folder with the question mark evry time I start it up.

I might be inclined to think the problem is really on your startup drive. You might try reinstalling Snow Leopard.
Also, try:
Resetting your Mac's PRAM and NVRAM
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Why does my mac no longer support Windows 8?

Similar Messages

Maybe you are looking for