Why does my mac pro keep losing connection

why does my mac pro and my husband keep losing connection

Same thing happening to me... WiFi is loosing all the time, but I did something that would never work in 10000 years, but worked... I disabled WPA security password, and with no password i don't have problem since... try that...

Similar Messages

Why does my iPad2 suddenly keep losing connection on facetime?

Why does my iPad2 suddenly keep losing connection on FaceTime and tries to constantly reconnect?

Does it happen anywhere that you use FaceTime or only in your home WiFi network? If it happens with your home network, have you tried power cycling your router? Unplug it for about 30 seconds and then plug it back in.
Turn WiFi off and on in the settings. Reset the network settings.
Have you tried any troubleshooting steps at all?

2008 Mac Pro keeps losing connection to my Plex Blu-ray burner

my 2008 Mac Pro keeps losing connection to my Plex Blu-ray burner. It is installed in the second optical drive bay. If I power down, pull the connections to the drive and re-attach, the drive is again recognized on boot. A day later, no drive found. The first optical (top bay) drive never loses connection. Any thoughts?

Disable drive sleep in the Energy Saver system preference.

HT2845 why does my wireless mouse keep losing connection?

Good morning,
My wireless mouse keeps losing connection...my batteries are at 100% and the "discoverable" option is checked off. Why is this happening?

Hi:
PRAM=parameter random access memory - reset like this:
http://support.apple.com/kb/PH11243
SMC=system management controller reset like this:
http://support.apple.com/kb/HT3964
Sometimes resetting these "fixes" odd problems - and it cannot hurt.
To make a device a favorite, go to system preferences>bluetooth. Highlight the device. If detailed information is not shown, click oin the little gear>show more info. Then click on the gear again and make the device a favorite.
Barry

Why does my mac pro keep restarting itself

It restarts by itself at least 4 times before I can use it without issues.

I tried to get your post moved to the MacBook Pro forum where others with your model and experience.
Pulling answers out of a rabbit's hat is magic. Diagnosing anything is trial and error and starting from scratch.
If it is for business, you should have multiple booable backup copies of your system so you can work from another hard drive.
I keep a spare computer handy if one of them runs into trouble.
General purpose Mac troubleshooting guide:
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
How to install OS X on a new or faulty HD without Internet recovery
Corrupt and new disks might not have a working Recovery partition, but there are still ways to access one and reinstall OS X, if needed.
http://reviews.cnet.com/8301-13727_7-57594422-263/how-to-install-os-x-on-a-new-o r-faulty-hd-without-internet-recovery/
About Mac OS X Kernel Panics:
http://support.apple.com/kb/TS3742
Resolving Kernal Panics
http://www.thexlab.com/faqs/kernelpanics.html
http://reviews.cnet.com/8301-13727_7-10344626-263.html
http://macs.about.com/od/usingyourmac/qt/Troubleshooting-Os-X-Kernel-Panics.htm
http://support.apple.com/kb/TS3742
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Recovery Mode
http://support.apple.com/kb/HT4718
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns

Why does my Magic Mouse keep losing connection?

I've had my Magic Mouse for about 6 months now. I use it with my MacBook Pro RD. It works fine most of the time but every now and then it would lose connection for anywhere from a few seconds to a few minutes. This happens even with newly replaced batteries so I know it's not a battery problem. I really expected better from what I thought would be a high quality mouse from Apple.
I am thinking of sending it back to be repaired or something, but when I entered its serial number to check the warranty status, I get the error "We're sorry, but this serial number is not valid. Please check your information and try again." In fact, the serial number printed on my mouse's battery compartment has 17 characters but the support page here only allows you to enter a 14-character serial number! What is going on?

I was having the same problem and found another thread with the solution. Basically the problem is some batteries do not fit tightly in the compartment and jiggle around causing the mouse to lose power and therefore the connection. The solution is either buy the apple rechareable batteries or wedge a piece of paper in between the batteries and the compartment lid (I used a bit on an index card fold over on itself). Once I did that = no more lost connection every 10 minutes.
The thread I'm referring to is here:
https://discussions.apple.com/thread/4261715?start=0&tstart=0
Posting in case someone else (like I did) comes here looking for an answer.

Why does my mac book keep shutting down? I mean it's on and then off suddenly

Why does my mac book keep shutting down? I mean it's on and then off suddenly

Do any informative dialogs appear after you restart it?
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Still having problems? Replace steps 6 and 7 with the following:
Reconnect just the MagSafe power adapter.
Press the power button to turn on the computer,
Then reconnect the battery.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Why does my mac pro slow right down when its on battery ???

Why does my mac pro slow right down when its on battery....... cant watch dvds as they keep jumping, internet slows down as does everything, then i run it off the mains and its all fine again, so my mac book pro has not become very portable, please help

Yo , yeah its a mac book pro, noly got it about 6 months ago, not sure if it has a removable battery, it all looks completely sealed, this is what it said in the battery menu:
Model Information:
Serial Number:          W01264M3HD3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0201
Hardware Revision:          000a
Cell Revision:          0158
Charge Information:
Charge Remaining (mAh):          5021
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5923
Health Information:
Cycle Count:          49
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -958
Voltage (mV):          11946
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No
Hope you can help, its reallly quite annoying considering its quite new.
Cheers

Why does my Macbook Pro keep shutting down during installation of OSX Mountain Lion?

Why does my Macbook Pro keep shutting down during installation of OSX Mountain Lion?

Hmm, good luck then!
I'm pretty much exactly on the opposite side of the planet, but I've been to Vermont and remember its rural beauty well. However, I can't imagine you having the only Internet connection within a reasonable radius (where "neighbors" hanging off the same ISP don't count). Uh, that note only if your wired connection to the router produces no good result, either...

HT6099 why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all 120Hz. So much for future proof.

why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all >120Hz. So much for future proof.

http://en.wikipedia.org/wiki/4K_resolution
http://en.wikipedia.org/wiki/4K_UHD
http://www.techradar.com/news/home-cinema/high-definition/4k-tv-resolution-what- you-need-to-know-1048954
Need More Pixels? Samsung’s 2014 UHD TVs Ship This Month
Wall Street Journal · 2 hours ago
Samsung’s 2014 lineup of Ultra High-Definition (aka 4K) TVs are on the way, and thanks to UHD content deals struck with Fox and Paramount—not to mention the…
Focusing on TVs and 1080p and 60Hz isn't the question, or the 'future'

Why does Adobe XI Pro keep appearing on screen each time I open a pdf file?

Why does Adobe XI Pro keep appearing on screen each time I open a pdf file?

Is this whatyou need?
If you uncheck this Acrobat Opens but the PDF will open without showing startup screen.

Why does my mac pro gets extremly hot about 20 min or so that im on and freezes about a 1 hour that im on then i have to power off etc can u help me pls

why does my mac pro gets extrwhy does my mac pro gets extremly hot about 20 min or so that im on and freezes about a 1 hour that im on then i have to power off etc can u help me pls

You can find out what processes are loading your system by running Application Monitor (in Launchpad > Utilities if you're running Lion or Launchpad > Other under Mountain Lion). Select "All Processes". Sort the display by CPU% (click on the label of that column). What processes show over 10% CPU?
Also, when you click on the CPU button on the lower bar, what shows as your % idle? (Mine is showing about 98% just reading and posting here.)
If no process is causing the heat, you could have a hardware problem.

Why does my macbook pro often lose connection with the canon mx922?

why does my macbook pro often lose connection with the canon mx922? This happened with the HP printer as well.

This may answer your Bonjour questions:
http://support.apple.com/kb/PH11449
https://www.apple.com/support/bonjour/
Ciao.

What is application memory and why does my macbook pro keep running out of it?

what is application memory and why does my macbook pro keep running out of it?

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
          A long-running process with a memory leak (a kind of bug)
          Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
          View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Why does my mac pro freeze on start up ?

Why does my mac pro freeze on start up ? Some times this three or four times before i can get it to start correctly.

Model Name:          Mac Pro
Model Identifier:          MacPro4,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.26 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per core):          256 KB
L3 Cache (per processor):          8 MB
Memory:          6 GB
Processor Interconnect Speed:          5.86 GT/s
Boot ROM Version:          MP41.0081.B07
SMC Version (system):          1.39f5
SMC Version (processor tray):          1.39f5
Sorry i am new to mac & communities , when you say repair the drives and clone the system what do you mean ?

Why does my mac pro keep losing connection

Similar Messages

Maybe you are looking for