Why does my Mac pro work slowly and can't open any thing immediately ?

Actually, I do not know why my Mac works slowly when click any application or any photo. I could not be able to open any thing immediately. I have to shut down my computer to open it again. I think there is a virus on my computer or something works wrong.

Actually, I do not know why my Mac works slowly when click any application or any photo. I could not be able to open any thing immediately. I have to shut down my computer to open it again. I think there is a virus on my computer or something works wrong.

Similar Messages

  • HT1414 after a software update the device is not working properly and can not open any website.

    I can operate it properly after an software update . Now no website cannot be opened and cannot get emails. Main thing cannot go to tunes and app store .

    First Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • Why does my mac pro gets extremly hot about 20 min or so that im on and freezes about a 1 hour that im on then i have to power off etc can u help me pls

    why does my mac pro gets extrwhy does my mac pro gets extremly hot about 20 min or so that im on and freezes about a 1 hour that im on then i have to power off etc can u help me pls

    You can find out what processes are loading your system by running Application Monitor (in Launchpad > Utilities if you're running Lion or Launchpad > Other under Mountain Lion). Select "All Processes". Sort the display by CPU% (click on the label of that column). What processes show over 10% CPU?
    Also, when you click on the CPU button on the lower bar, what shows as your % idle? (Mine is showing about 98% just reading and posting here.)
    If no process is causing the heat, you could have a hardware problem.

  • Why does my mac pro keep losing connection

    why does my mac pro and my husband keep losing connection

    Same thing happening to me... WiFi is loosing all the time, but I did something that would never work in 10000 years, but worked... I disabled WPA security password, and with no password i don't have problem since... try that...

  • HT6099 why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all 120Hz. So much for future proof.

    why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all >120Hz. So much for future proof.

    http://en.wikipedia.org/wiki/4K_resolution
    http://en.wikipedia.org/wiki/4K_UHD
    http://www.techradar.com/news/home-cinema/high-definition/4k-tv-resolution-what- you-need-to-know-1048954
    Need More Pixels? Samsung’s 2014 UHD TVs Ship This Month
    Wall Street Journal · 2 hours ago
    Samsung’s 2014 lineup of Ultra High-Definition (aka 4K) TVs are on the way, and thanks to UHD content deals struck with Fox and Paramount—not to mention the…
    Focusing on TVs and 1080p and 60Hz isn't the question, or the 'future'

  • Why does my mac pro slow right down when its on battery ???

    Why does my mac pro slow right down when its on battery....... cant watch dvds as they keep jumping, internet slows down as does everything, then i run it off the mains and its all fine again, so my mac book pro has not become very portable, please help

    Yo , yeah its a mac book pro, noly got it about 6 months ago, not sure if it has a removable battery, it all looks completely sealed, this is what it said in the battery menu:
    Model Information:
      Serial Number:          W01264M3HD3BA
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0201
      Hardware Revision:          000a
      Cell Revision:          0158
      Charge Information:
      Charge Remaining (mAh):          5021
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5923
      Health Information:
      Cycle Count:          49
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -958
      Voltage (mV):          11946
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    Hope you can help, its reallly quite annoying considering its quite new.
    Cheers

  • Why does my mac pro freeze on start up ?

    Why does my mac pro freeze on start up ? Some times this three or four times before i can get it to start correctly.

    Model Name:          Mac Pro
      Model Identifier:          MacPro4,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.26 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per core):          256 KB
      L3 Cache (per processor):          8 MB
      Memory:          6 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          MP41.0081.B07
      SMC Version (system):          1.39f5
      SMC Version (processor tray):          1.39f5
      Sorry i am new to mac & communities , when you say repair the drives and clone the system  what do you mean ?

  • Why does my Mac Pro turn completely off while in the sleep mode?

    Why does my Mac Pro turn off completley overnight when I had placed it in the sleep mode?

    A power fluctuation may also shut your computer off from sleep mode.
    Is there anything in the System Log overnight?
    Here is a related article:
    About diagnostic and usage data in OS X Lion and Mountain Lion

  • Why does my Mac Pro try to start up from a blank drive?

    I fitted a 2nd drive to my 2006 Mac Pro in anticipation of dual booting Windows (not done yet). The dive is FAT formatted but is empty. Why does the Mac Pro try to boot up from that drive every time I start it up, despite having set the startup disc as OS X in the System Prefs?! Getting sick of seeing the flashing folder with the question mark evry time I start it up.

    I might be inclined to think the problem is really on your startup drive. You might try reinstalling Snow Leopard.
    Also, try:
    Resetting your Mac's PRAM and NVRAM
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Why does my Mac Pro open to a fuzzy screen when coming out of sleep mode?

    Why does my Mac Pro open to a static-filled screen when coming out of sleep mode?

    But does it then come fully awake? My MB Pro comes on with out of focus screen as if in a fog but once it comes awake it clears up, there is a progress bar at the bottom showing the progress from sleep

  • New Mac Pro with Lion and can't install FCP.

    I got a new Mac Pro with Lion and can't install FCP that worked fine in SL.  Is it not compatible?  Is it really a PowerPC program???  I'm a videographer and rely on this software and to spend $300 to continue to use it after spending a lot more for this software 4 years ago!  Tell me this is not the case and there is a solution to installing FCP.

    How to run FCP 6 (FCS 2) under Lion.
    The installer for FCP 6 (FCS 2) is a PPC app. The Programs themselves are Intel. If your trying to install FCP 6 (FCS 2) this work-around will work...
    First you need to install Rosetta from your Snow Leopard OS installation disc:
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html
    After doing that you can install FCP 6 (FCS 2). Remember, after installing FCP 6 (FCS 2) you need to apply the updates. This has been discuss many times in the Final Cut Studio forum.
    If your trying to install FCP version 5.1 (FCS 1) (a PPC app) and below your out of luck....
    If you need further help, here is the URL for the  Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
    R

  • After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

    After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • Just installed snow leopard and can't open any of my word docs?

    Just installed snow leopard and can't open any of my word docs?

    Depends on what you're doing; SL doesn't really support Office docs directly. In Snow Leopard, TextEdit can open Word docs, albeit with little fidelity for anything beyond text. Try iWork if you need to really work with Word docs (note that even then it's an import/export process and not native support).

  • How can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card, how can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card

    how can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card????please help

    You can't. There is no memory card. It uses flash memory that's soldered to the logic board. If you didn't back it up, your data is gone.

  • What does the Mac Pro do? and who uses it?

    Hey guys, I want to know What does the Mac Pro does and which type of people use it.

    To add a slightly less technical perspective, I bought a new Mac Pro because it fits my preferred working style rather than because I need its specific computing power (And also because my 2008 MP crapped out and I got tired of fixing it).
    When my old Mac Pro died, I ran out and bought a Macbook Pro Retina and used it as my desktop while waiting for the new cylinder MP. The MBPr was stunning and performed like a champ. However, I was reluctant to use it as a laptop (i.e., travel with it) since it was my sole platform for client work and I didn't want to jeopardize my ability to work/deliver should something nasty happen on the road.
    So maybe I'm a bit old fashioned, but I like to have a desktop mac for my primary workstation (I'm a graphic designer and photographer) and a laptop for the road. I use a high-end, wide spectrum monitor for color critical work, so while it's true that an iMac would have the power to run the stuff I need, I prefer to have options with my monitor.
    Again, just another perspective that might factor into a purchase decision. How do you like to work and what works best for your situation? It isn't always mandatory to have the fastest and latest (unless, as in my case, it falls into your established criteria/working style).

Maybe you are looking for