Why does my macbook pro not have an apperance tab under display

I am trying to connect my macbook pro to my tv to watch Netflix via an adapter and HDMI cable. I went into Display to go to Appearance and turn on mirroring but I don't have an appearance tab under display. Is there somewhere else this would be?

Thank you very much but now I have another question. I plugged in my adapter to my computer, plugged the adapter into the HDMI cable, plugged the HDMI Cable to my TV. I have tried the Detect displays button after I changed my TV to the HDMI source and Before I changed my TV but I still can't get my computer to detect any displays. Do you happen to have any suggestions?

Similar Messages

Why does my MacBook Pro not boot up with the Snow Leopard Disk?

I have erased the entire hard drive on a 2011 macbook pro that had snow leopard on it. I was corrupted. I not insert my Snow Leopard Disk and the machine will not boot. I chose target mode to erase the hard drive from my mac book pro with Mt. Lion on it.
Thank uou for any help,
Ken

Target mode? Is there a second computer involved? Why not insert the Snow Leopard disc in the computer on which you wish to install and hold down the C key to boot from it?
If the disc came with a different computer it will not boot another model. Retail discs also may not boot all model computers, even those that came with the same major version. For example, some MBPs came with 10.6.6 but a retail disc may only be 10.6.3.

Why does my macbook pro not wake up from sleep?

I have a brand new Macbook Pro 13inch. It freezes up when I try to wake it from sleep. I was wondering if there is a fix for this.

Hello,
Thanks for visiting the Apple Support Community! Have you performed all of the software updates on your MacBook Pro?
To do this:
1. Click the Apple Logo in the top left
2. Choose "Software Update"
3. Click "Check for Updates"
Install any available updates and restart your Mac. Let us know if this resolves it or not. Additionally, you have posted in the iPhone Discussion area; for future reference please post in the correct category.
Thanks!

Why does my MacBook Pro still have disk problems even with replacement disks?

I have a 2008-era MacBook Pro. In January it failed to boot. I took it to Apple and paid for a replacement system board. When it came back they told me the hard drive was also bad and they had replaced it.
About a month later my performance became very bad. A test of the hard disk revealed unrecoverable errors. I reformatted the disk and restored from Time Machine. About a month later, the same problem surfaced. This time I took it back to Apple and they put in a replacement hard drive.
Now here I am about a month after that and the hard drive has asked to be reformatted twice again.
What is REALLY wrong and how do I get it fixed?

How does the disk test which checks the drive have to do with corrupted data?
Let me clarify:
1. System gets slow.
2. I run the Disk Utility > Verify disk.
3. It reports data corruption errors and and says to run Disk Utility > Repair Disk
4. I run Disk Utility > Repair Disk
5. It says errors are such I need to run it from the Utilty partition
6. I restart from the Utility partition and run Repair Disk
7. It reports it can't fix the problem. Tells me to erase the disk and restore.
8. I do all that.
9. Now I run Verify Disk again. All is well, and all continues to be ok for several weeks.
So, if the Time Machine backup was corrupt, step 9 above would fail.
Since this is the third hard disk since January, I doubt that the problem is REALLY the disk.

Why does my MacBook Pro screen have white marks on it and how do I get rid of it?

My MacBook Pro started having these white marks right in the middle of the screen and I don't know how to get rid of it. I brought this MacBook online so I only have the invoice from seller. Is this sufficient evidence to show apple to replace under warranty?

riaguo wrote:
My MacBook Pro started having these white marks right in the middle of the screen and I don't know how to get rid of it. I brought this MacBook online so I only have the invoice from seller. Is this sufficient evidence to show apple to replace under warranty?
you will have to bring it to apple so that they can determine that.

Why does my macbook pro not start up?

Today I changed ram on my old macbook pro. 667hz DDR2 type from 2X1 TO 2X2.
After i finished the installation my laptop has not worked properly. It currently runs 10.7.
No startup sound, and the white light at the bottom flashes constantly in sequenses of three. Three quick flashes.
What is wrong? Even when I re-inserted my old RAM the same problem occurred.
Please help!

MacBook Pro 3,1 15' 2,2 Core 2 Duo Late 2007.
I used the same buss speed (667 mhz) and the same type DDR2. Same number of pins.
I also checked what happened with 0 ram in slots, and then it started blinking constantly.
So it must see the RAM but the RAM seems useless for some reason...

Why does my macbook pro not discover a bluetooth headset?

I have a Philips SHB6110 bluetooth headset. I went to the place where you can set up a new bluetooth device, but it does not show the device on the list.
The headset is on and charged.
Any answers?

Hello sig,
I don't think, that you completely understood my question. The problem in your question, is that there is something wrong with the sound output/input, but my problem is, that my headphones will not pair or even be discovered by my computer.
However, during the time, that it took to get the first answer on here, I found it out myself.
While pairing, your headset must be in a so called "pairing mode" you can get it by switching your headset off, then holding the power button until the LED starts blinking red and blue. Then your mac should discover it without a problem.
The audio quality is quite bad on this headset, so I will only be using it for skype. It's really weird to listen to music on these.
All the best,
rein205

Why does my MacBook Pro not find USB hard drive after waking from sleep?

is this a known issue? i have to manually turn off/on the Mac's Airport to re-establish USB HD connection (or Time Machine won't find it either).

bender73 wrote:
is this a known issue? i have to manually turn off/on the Mac's Airport to re-establish USB HD connection (or Time Machine won't find it either).
I hate to have to tell you this, but backing-up that way is "iffy" and *+not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).
It sounds like you're using that disk for other things besides your backups; if so, and if you're going to continue backing-up that way, it really should be partitioned so Time Machine has it's own, exclusive space. See #Q1 in the same link.
Time Machine should find it's partition when OSX wakes up; if it doesn't, try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

Why does my MacBook Pro and Mac Pro keep freezing?

Why does my MacBook Pro freeze?
MacBook Pro
2.4 GHz intel Core2 Duo
4BB 1067 MHz DDR3
OSX 10.6.8 Snow Leopard
I turned it on and I went to safari to look things up. Safari froze and then the whole thing became unresponsive - the mouse could move the cursor but it couldn't open any programmes.
Tried safe boot several times. No help.
Tried to repair disc permissions. The first time it got a little way then said 'user stopped repair' or something - though I didn't touch it. Tried again it got all the way through and said 'repairs complete'. But no help.
Couldn't clear cache etc as couldn't get to the relevant part to do it.
Opened in single user mode. Ran the fsck -fy thing twice. First time it said both “The volume appears to be OK” AND “FILE SYSTEM WAS MODIFIED.” In 2nd run it just said “The volume appears to be OK”. No help.
Booted it up from the Superduper bootable backup version on a USB external drive. It seemed to boot up ok but then tried to click on something and the same thing happened - spinning beach ball and it just hung.
Erased hard drive and reinstalled snow leopard but it just does the same thing. Suggesting a hardware issue not software but...the Eerie thing is, we tried backup version on boyfriends Mac Pro and it worked fine on there but 24hrs later his Mac Pro has got exactly the same screen freezing, unresponsive issue. Could this suggest there's something evil lurking on my back up? Can't get an appointment at Genius Bar until next week and need to get some work done, so hoping someone might have some ideas?
Cheers
Kerry

KaiDonald wrote:
... does Apple products work much better with using Apple routers?
While a genuine Apple router is likely to result in success, the reason for having one instead of another product is that it eliminates a lot of uncertainty. For example, we do not know the model D-Link product you have so no one is in position to speculate what the problem might be. Also, it makes support on this forum easier since there are only three AirPort models to choose from and they all work more or less the same.
Generally speaking your iPods, iPads, MacBooks, and AppleTV ought to work with any router though, provided it is fairly recent and meets accepted industry standards. If in doubt you can purchase an AirPort Base Station, which comes with 90 days of free telephone support. If it does not result in any improvement for you, you can always return it for a complete refund. The return period is 14 days and be sure to keep all material - receipt, box, manuals, etc...
If you elect this option be sure to follow its installation instructions, the most important of which is to power down your modem prior to connecting the AirPort Extreme, Express, or Time Capsule. All your other equipment will need their network settings adjusted to "forget" the D-Link network and connect to the new one.

Why does my macbook pro retina display shutdown while entering the administer account

why does my macbook pro retina display shutdown while entering the administer account

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does my macbook pro stop loading the webpage every time i try to access netflix or youtube?

Why does my macbook pro stop loading the webpage (in safari) every time I try to access netflix or youtube?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

What is application memory and why does my macbook pro keep running out of it?

what is application memory and why does my macbook pro keep running out of it?

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
          A long-running process with a memory leak (a kind of bug)
          Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
          View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Why does the iPad Mini not have music play count?

I bought an iPad Mini and also have a macbook. I had listened to various music on my iPad Mini the other day, however when I connected the iPad Mini to the Macbook and iTunes via the lightning connector to sync, it synced the ratings I gave the songs I listened to on the mini, but no play count, as if I had not listened to anything. I hope there is something I can do about this as I often look at my play count!!

Katrina UK
It should work work but these kind of bugs pop up between updates, both hardware and software. Try closing all apps in the recently used list on the iPad. Double tap the Home button, tap and hold one of the icons at the bottom till they wiggle then tap the to close them. Tap the Home button to get back to the Home screen then hold the sleep button till you see the slide to power off message. Once it has powered down completely hold the Sleep button till the Apple icon appears.
tomyiiii
Re: Why does the iPad Mini not have music play count?
Nov 18, 2012 11:34 AM (in response to Katrina UK)
Does it even really matter...?
Many people including myself rely on playcounts to control smart playlist to manage large libraries. Smart playlists can be created to show your most or least played tracks and used more or less as your favorites or other uses. Along with playcounts the date is transferred so to keep a fresh list of music on my smaller iPods a smart playlist set to songs not played in the last month keeps some fresh tunes on it.
Playcounts are also used to manage Podcasts in iTunes to delete older episode. Bookmarks, which can also be effected by this, can mess up audiobooks, movies and podcast playback between different devices. So yes, it does matter.

Why does my MacBook Pro make background music and video quieter when I am on FaceTime?

Why does my MacBook Pro make background music and video quieter when I am on FaceTime? When my girlfriend and I are trying to watch a movie on Netflix together while on FaceTime my MacBook Pro always decreases the volume of any background sound on my computer so I can barely hear it. Is there a way to fix this? Thank you!

Have the same issue too. Apple can you please change this annoying feature. You are making long distance relationships more difficult.
I like how Facetime was with the old iOS, where nothing was dimmed. OR at least maybe if you could give users the option to turn on or off dimming of facetime.

Why does my macbook pro "goes to sleep" when charging?

Why does my macbook pro "goes to sleep" when charging? It is working fine without charging but once I attach the charger to my laptop, it just blacks out or goes to sleep mode and I can't wake it up unless I unpluck the charger.
I read from threads that it is a logic board problem....How do I solve this problem?

Try an SMC reset. Follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

Why does my macbook pro not have an apperance tab under display

Similar Messages

Maybe you are looking for