Why does my mail have blue dots and won't open? My Internet is okay.

My Internet seems to be working fine.  I have blue dots in front of each mail message and the messages won't send.  Help.

If you can't open the messages or send emails, you can try quitting the mail app completely as well.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the screen above the task bar.
Then go back and try mail again.

Similar Messages

  • Why does my printer say "offline" sometimes and won't print?

    Why does my printer say "offline" sometimes and won't print?

    Hi - Try following the steps in this document.  It should help resolve the issue.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Why does a specific website say validating and doesn't open the site for me?

    why does a specific website say validating and doesnt open the site?

    My Safari also has a hiccup. My ISP (comcast) helped me by suggesting I try the same task using a different browser (firefox). I had both installed, and firefox completed the task smoothly with no issues. I was told the problem was on my end and my safari browser was most likely flawed. I cannot find the procedure to uninstall & reinstall the Safari app. My iMac came with 2 discs (os & bundled apps) But the ability to choose Safari only, for this task remains illusive. Any suggestions or fixes to repair a glitch infected Safari will be appreciated. 

  • Links to web page in any mail message will cause Mail app to hang, and won't open Safari.

    Repeatable problem on iPhone or iPad.
    Any link to a web page will cause Mail to lock up and become unresponsive, and won't open the web page in Safari.
    The only way out of this is to back out to the home screen, double-click on the home button, then select the Mail app icon, holding it until I can "close" it. I can then relaunch Mail and look at any message I want just like normal.  But if select any link, whether a text link or a picture in an email, the whole thing happens again.
    Occurs on both my iPhone 5 and my iPad both running iOS 6.0.1.
    Any suggestions that will allow me to go directly from a mail msg to a linked web page embedded within?

    You ran a defective third-party "utility" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.   
    The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • HT1386 After last syncing between iPad3 and iMac, many books I have purchased have cloud symbol and won't open. Afraid to resync as one very large book didn't sync to iMac and afraid of losing it. How do I get these books back?

    1. After my last synching between iPad3 and iMac, most of my downloaded books have a cloud/arrow symbol and won't open. Most PDF files in iBook just disappeared. I am afraid to resync as a book I recently downloaded, which took up a big chunk of my 5GB download limit, doesn't appear on my computer and when I try to sync, I get the message that all my books will be replaced.
    2. Is there any way to read the books downloaded to my iPad on my iMac? Can I download an Ap for that?
    I am really disappointed in the interface between my iPad and iMac and the fact that I can't selectively delete items (music and photos) that I have synched to the iPad. It seems like Apple if going toward the Microsoft method of trying to do everything for you, rather than allowing the user to manually do things.

    In iBooks on the iPad every book you purchased will be on the Purchased Book collection. Those books that you have purchased in the past but for some reason are not actually on your iPad are still available in the bookstore. They will have the cloud symbol on the corner. You can tap on that book to download it again. You will not be charged for doing this.

  • Updated mac to maverick and all my files from pages have greyed out and won't open ?

    I use pages and also save a PDF when ive typed a document I updated to Maverick and all my pages and pdfs from before I updated have greyed out and I cannot open them help please

    thank you Eric, but any of those solutions works because on Maverick the options on itunes: "Tap on the Info pane, then De-select the option to Sync Notes" is not longer available.   Also, I have tried all those steps about de-select sync notes on iphone and mac.  I need a solution that consider working on Maverick.

  • TS1307 Why does send mail just stop working and how do you fix it?

    Using MacBook Pro bought last Chrismas and its mail client 5.2
    In the last 2 weeks send mail has stopped working for both my wife and myself (we have different logins / accounts / email address providers)
    We have tried different wifi / isp providers
    rebuilding the mail database
    accessing preferences and changing the default ports to specified port 25 and then back again
    taking the mail accounts off-line and then back on again
    deleting the accounts and then creating just one simple one (GMail)
    no change - send mail still does not go.
    What should we do now?
    What have we done wrong to cause this to fail in the first place?
    It was working fine, but now it is not.
    It is quite worryingand a fix would be greatly appreciated
    Thanks in advance
    Steve

    Hmmm, here's the opposite problem/fix...
    Gmail send but not receive...
    Here are two steps that have come in handy in related situations
    1) login to gmail on your computer or device via a web browser
    2) once logged in successfully, go to this URL to unlock:
    https://www.google.com/accounts/DisplayUnlockCaptch
    Is your gMail POP or IMAP?
    If IMAP...
    Is the Outgoing server smtp.gmail.com, port 25, SSL on, & Authentication = Password

  • Why does my iphone have poor coverage and other phones work good

    i have two AT&T phones, 1 iphone 4 and the other a motorola tundra for work. My question is why does the Motorola tundra have 100% signal and my iphone go in and out of service continually....from 3g to no service and then to E network then back to O network and then to no signal at all. very frustrating

    Open the App, then try the settings and options within the Game.

  • Why does my Photoshop CS6 "quit unexpectedly" and fails to  open.

    Why does my Photoshop CS6  always "quit unexpectedly" and fail to  open. Can't access photos or use       PS. Here is part  message
    Process:    
    Adobe Photoshop CS6 [1676]
    Path:       
    /Applications/Adobe Photoshop CS3/*/Adobe Photoshop CS6.app/Contents/MacOS/Adobe Photoshop CS6
    Identifier: 
    com.adobe.Photoshop
    Version:    
    13.0.5 (13.0.5.44)
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [184]
    Responsible:
    Adobe Photoshop CS6 [1676]
    User ID:    
    501
    Date/Time:  
    2014-08-11 16:42:25.068 -0400
    OS Version: 
    Mac OS X 10.9.4 (13E28)
    Report Version:  11
    Anonymous UUID:  DD70D0DD-D2C6-D436-1AAF-A239C8F3B2F8
    Sleep/Wake UUID: E0AD7CBF-C659-4D4D-AD6D-5BEDB3ED608E
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000010

    Well, where is the rest of the crash report?  Just posting the header doesn't help...

  • Why does Macbook Pro have gray "curtain"and msg to shut down when playing video online?

    Hi,
    I have a MacBook Pro running Snow Leopard v 10.6.8 and have put on all the security updates.
    I bought this machine just days after the newest MBP's were released with Lion because I wanted to stay with Snow Leopard
    From the very beginning I would have occasional "gray screens" with a message that I'd encounterd a problem and needed to shut down.  It always occured while I was watching a streaming video online (Flash?) but it didn't always happen.  I updated my Flash plugin and that seemed to help.  I use both Safari and FireFox and both are now updated to the latest versions.
    I had also noticed via iCleanMemory that my memory availability was very low .....I always have many tabs open in my browsers and have backup software that backs up to online storage running and when I watched a video, it dropped to almost 0 and everything ran slow.  I had 4 GB Ram.
    So, I ordered new ram and put that in and now have 8 GB.  Machine runs fast. Love it....except it keeps giving me that veil of gray and the message to shut down.  It happens several times a day now and while usually in conjunction with watching a video clip, it's not always the case.  But I have lots of available memory.  That wasn't the issue.
    I found an Apple Support paper relative to needing a video update on some mid 2010 MBP's and downloaded it.  It won't install and says it won't run on my system so that didn't help.
    I'm at my wits' end trying to keep this thing running.  Everytime I have to shut it down it means a minimum of 8 min...sometimes more.....before it will restart.  If I try to restart sooner than that, it begins to boot and then just has lines and lines of numbers and code running across it....and often continuous beeping sounds and I have to hold the button down to shut it off again.  If I wait long enough, it does boot back up and sometimes runs fine as long as I'm not watching video clips, a streaming tv show or clicking on a lot of links in web pages.
    I don't believe it has shut down when I was doing anything that wasn't web related....i.e. on a browser. And, when I was running with only 4 gb ram, it rarely shut down, just ran very, very slowly.  Now with 8 gb ram it is speedy but doesn't seem to want to keep working!
    Anyone have any ideas what I should try next?
    Thanks
    Paula

    Hi Allan,
    Thanks for your reply.
    I have been closing iCleanMemory but the shut down (kernel panic) was still happening.  Not sure how to go about uninstalling it as it's one that runs at start-up and dragging it to the trash might not get rid of it completely.  I"ll find it's web site and see if they have any info.
    Haven't checked your web link yet (it's late and gotta get to bed) but will do so tomorrow.
    I also run Backblaze and DropBox that begin at startup and are constantly updating in the background, iStatMenus and Sharpshooter. 
    The kernel panics were happening....tho much less frequently.....before i put iClean Memory on.  If I remember right, I installed it just because I had those periodic shut downs and wondered if it was a lack of memory.  Because I then saw that memory was very low all the time, I decided I must need to put more memory in.  And that seems to have made the issue worse while also making the machine work faster for the time it is running.
    Now, I've been working on here for a couple of hours and had no problem at all......but I haven't asked it to play any kind of video.  Before I quit for the night, I'll try to watch the last one I tried that caused it to shut down and see if it does it again.
    I do appreciate your help as I have just enough knowledge about these things to be dangerous.
    Paula

  • Why does my Mac pro work slowly and can't open any thing immediately ?

    Actually, I do not know why my Mac works slowly when click any application or any photo. I could not be able to open any thing immediately. I have to shut down my computer to open it again. I think there is a virus on my computer or something works wrong.

    Actually, I do not know why my Mac works slowly when click any application or any photo. I could not be able to open any thing immediately. I have to shut down my computer to open it again. I think there is a virus on my computer or something works wrong.

  • Why does quicktime 10 keep reloading movie and won't quit?

    When I try to quit quicktime after watching a movie, it just keeps reloading the movie. I've tried force quit, and clicking on file to quit, but it keeps reopening. I'm using Firefox, so I'm wondering if that has anything to do with it?
    Any help would be apprecitated!

    Hey there AmandaJoelle,
    It sounds like your Quicktime application is quiting unexpectedly. I recommend the following article to help troubleshoot possible issues with 3rd party plug-ins, named:
    Multimedia applications may quit unexpectedly with some third party QuickTime components
    http://support.apple.com/kb/ts2346
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Upgrade to Lion: Mail is not compatible and won't open.  How do i reinstall an updated version Mail?

    So, I'm currently trying to update my parent's computer and in the process of updating their Mail application it has become unusable.  My computer at home (not my parents computer) ran into the same problem before I updated to Lion and deleting the preferences for Mail solved it.  Plus, I have read previous posts about this similar problem and a typical troubleshooting solution was to delete the Mail preferences.
    After all of my software updates (Mac OS X Snow Leopard 10.6.8) and deleting the preferences for Mail, I still receive the same error message when trying to open the application.  "Mail can't be used on this version of mac OS X.  Try opening the version of Mail located in the Applications foler on your computer."  My applications folder has not been adjusted, edited or even touched from it's original state in the dock/home folder.
    I contacted AppleCare support and they advised me to reformat my computer.  I think that's a little... unneccesary??  It's just Mail that isn't working.  The rest of the applications (e.g. Safari, Address Book, iPhoto, etc.) open just fine.
    After a second call to AppleCare, they had advised me differently than before.  Once they found out that my personal computer has Mac OS X Lion installed from the App Store, they suggested I simply upgrade my parents computer to Lion.
    So, I used my download from the App Store and upgraded.  It went smoothly, but Mail still will not open properly.  And instead of the original error message, it comes up with this:
    "Check with your developer to make sure Mail can work with your version of Mac OS X.  You may need to reinstall the application.  Check if there are any updates available for the application."
    How can I re-install just Mail?  A startup disk is not accessible for me right now.  Can I download the latest version of Mail and install it from the Apple.com website?

    Applesince822 wrote:
    Do we get money back if it no longer opens?
    Certainly not without going through basic troubleshooting steps first. Many times some basic troubleshooting will fix things. If you haven't tried anything yet, you cannot say for sure that the app will not work at all.
    There are a number of things in here that you can try.
    http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
    In a worst case scenario, you can always delete the app and download it again and see if it will work. You will not be charged again as long as you use the same Apple ID that you bought the app with.

  • Why does lion not have front row

    why does lion not have front row
    and what can i do to get it i loved the ease of use

    Front Row is not included or supported in Lion.
    Read here, but proceed at your own risk

  • Only some movies I have placed in iTunes "Movies" are viewable via Apple TV.  Why?  Also some movies have blue dots in front of their titles and some don't . Why?

    Only some movies I have placed in iTunes "Movies" are viewable via Apple TV.  Why?  Also some movies have blue dots in front of their titles and some don't . Why?

    Please understand I am a frustrated customer like you,  , but the availability of movies that have been shown before is dependant on licencing from the rights owners. Sky quite rightly have to pay the film studios for the ability to show to Sky's customers. As I understand it they purchase the right for a period of time, hence when the right expires then it has to be removed. The costing of the movies does reflect on the anticipated popularity of the programme, hence an older less popular movie might seem expensive but if not many people watch and pay that would be right. The apparent silliness of having movies in the store and on demand, allows those people who do not have a movie subscription to rent the movie on a one off basis. I agree that Sky seem to be licencing some programmes for shorter periods and it really upsets me when movies appear in buy and keep but not available to rent only. I recently queried Sky about Fortitude being available in OnDemand until 2022!, then of course found out that Sky owns the rights of the series. I can only say be careful if you are a movies subscriber and wish to watch a movie, not to select the Sky Store version if it is available in the Movies on Demand section. I recently wanted to watch a film that I found in Sky store at a cost, and just to be sure I searched for it and found it was to be shown on Channel 4 in a few days. I don't think we'll ever understand how such decision are made as to how long they licence movies for and how the charging model works with the film studios. Logically you would think that a smallish fee to have available indefinately and to pay the studio fee based on the number of rentals would be better, but that might be difficult to administer and Sky would have to have extra server storage fees, which they outsource. Hope that help you understand 

Maybe you are looking for

  • MacBook Pro power adapters dying, keys frying, strange heat problem

    I've got a very frustrating and mysterious major situation going on with my MBPro. I'm living in Peru in the jungle. I've got a basic electric hookup that's caused no problems for the few electrical devices I've got: small dorm-size fridge, a lightbu

  • Are JDev autogenerated paths needed to create ear, war and jar files ?

    Hi We want to create ear, war and jar files from Ant build script generated from JDeveloper 11.1.1.7. We also like to use ojdeploy with it. In the process of creating build.xml files from projects, we see these paths. We also have standalone Weblogic

  • How do I port triggering?

    I can't connect ot EA Games servers so I wrote them asking what I should. They told me this: It is imperative that you contact your router company or internet service provider. Make sure that your router has the latest firmware. After the firmware up

  • Message : "LabVIEW no longer supports this function..."

    When you try to open a VI built in 7.1 using version 8. x and if it has a function like Open/Create/Replace file.vi  or Write Characters to File.vi , you get a message that says LabVIEW no longer supports that VI and instead use of another VI is reco

  • Invoice Lists, can you create a single a/c for multo billing docs

    We are looking at using the invoice list functionlity to provide a single bill for a payer per month. This will cover multi ship tos, billing document types, PO numbers etc. Is there a way to have a single accounting document that will be able to cap