Why does my mailto application keep disappearing?

I have restored my mailto application several times and each time I hope to use my gmail as a client, Outlook loads. I have gone through the steps at least three times in the last month or so to restore my mailto application and select gmail as my mail client.

You can try "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

Similar Messages

Why does my Epson printer keep disappearing from my ipad

Why does my air printer keep disappearing from my ipad

reboot the router (and the printer).
If still happening, check your router settings. Is it set so that the lease on the printer IP expires?
The pad has to see the printer as active, and on the same wifi network as the pad.
You might also want to see if there is a firmware update for the printer available.

Why does my scroll bar keep disappearing when I am trying to scroll on my macbook pro . I am using osx version 10.9

The scroll bar keeps disappearing as I am trying to scroll on the macbook pro osx 10.9 update installed.

Scroll bars have been doing this since Lion. You can set them to stay on in System Preferences.

Why does my test application quit (disappear) during testing?

Hello,
I wrote test application using CVI2009 under WinXP. The application runs fine but when I repeat test, the application quits around the 9th or 10th repeat. When I reload and run the application it would quit again around the 9th or 10th repeat. I do not have a clue of what is going on. I have attached error logs A80428Error.bmp and A80428ErrorLog.bmp. Would someone please help?
Than you.
Robert Mensah
Solved!
Go to Solution.
Attachments:
A80428Error.zip ‏10 KB
A80428ErrorLog.zip ‏128 KB

Hello Robert,
a couple of hints on your problem :
1. Are you shure the system you are running on is stable? In the event viewer screenshot you have posted I noticed *a lot* of Application hang errors on several different programs (cvi.exe -which by the way appears to be release 8.51- , explorer.exe, your app, NI Example finder and so on. Maybe you should reconsider reinstalling the system and see if this fixes some of the errors
2. Did you happen to develop your application in CVI 2009 evaluation version? If so, keep in mind that every executable built in eval versions will hang after approx. 10 minutes running (more or less the difference between records on 3/3/2010 12:03 and 3/3/2010 12:14 in system log)
3. If none of the above applies, you could recompile the application checking "Generate map file" checkbox in Build >> Target settings panel: this will generate a report inside cvibuild directory with mappings for all function calls inside your application. By searching the fault address shown in the error log inside the map file, you can narrow down the faulty condition to some specific function in your program
Message Edited by Roberto Bozzolo on 03-05-2010 09:34 AM
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Why does my anchor handles keep disappearing?

This is literally driving me mad. When I change something via convert anchor tool and then release, the handles disappear and when I click back on the anchor point they go back to where they were originally. I want them to stay selected. The path has been created using the pen tool.
Another related question, is there a way to just select one of the handles when clicking an anchor point? Whenever I click both are selected so when I move the mouse, the other handle is being manipulated too.
And another question, is there any way to stop anchor handles reverting to their original position settings when clicking to activate them? I always have to click, then undo.

You may work on one handle only by Alt/Option+ClickDragging it; you may also retract one handle that way.
ONLY IF you're using the white pointer. Doing that with the Convert tool will duplicate the segment. Again, Nicola, don't use the Convert tool to select points. That's what you're tripping over.
Funny name for it, show edges...how are you meant to work out what it means from that name? With pencil and paintbrush you double click and choose keep path selected, you'd think it'd be the same.
Nicola, you need to spend some serious time in the documentation.
The Keep Selected option for the Pencil and Brush tools is an entirely different function. It determines whether a path you draw with the tool REMAINS SELECTED after you mouseup.
The Show/Hide Edges option in the View menu determines whether a path's selection edges DISPLAY when it IS selected.
I'm certainly not defending Illustrator's awful interface design; I'm just telling you how it is. (All the more reason you need to read and work through the instructions.) The Show.Hide Edges command is actually a workaround for a particularly bad aspect of Illustrator's poor design: it's insistence on displaying edges of all contents of selected Groups, Clipping Paths, etc. All those selection edges frequently get in the way, so somewhere along the way, Illustrator had to add an option to override the annoying standard behavior. This, too, is poorly done, because you really can't operate for long that way.
Other programs don't have to second-guess themselves in things so basic as selection display, because they have more sensible interfaces to begin with.
JET

Why does my Apple TV keep disappearing from Itunes?

Now this is frustrating. Recently, after months with no problem, my Apple TV is not appearing in my list of devices in itunes. I have switched it off, restarted the Mac etc. Then I reset the Apple TV, hey presto, it was back, until I reloaded the latest software update, when it disappeared again. Any clues as to why this is happening? I must point out that I have recently added Windows Vista to the Imac, but would not expect that to affect the Apple TV, but what do I know?

Yeah.. I just noticed I was missing stuff last week, and then realized that my Apple TV was not showing up in my iTunes device list. I'm just hoping that the silence on this issue from Apple is a sign that they are getting ready to push out an update to correct either itunes or Apple TV. I've read lots of complaints, and just a few remedies. I've tried the remedies (including the one on the Apple TV support site) and none of them work for me. I have noticed one thing that that I wanted to try. In iTunes->Preferences->Apple TV I have an Apple TV in the "Apple TV's connected to iTunes" window, that shows a status of syncing. Since I don't have an Apple TV in the device list, and my Apple TV was reset days ago so it is giving me the code to enter into iTunes, can I assume that this item can and should be deleted. I don't think this is going to solve my problem, but it looks like a good next step. Any suggestions?

Why does my Firefox Persona keep disappearing!?

I'm on Windows 7, using Firefox version 3.6.15 - Everytime I re-boot my PC and start up Firefox the persona I've had applied is gone. I checked my Add-ons / Themes, which do show the theme when I apply it to Firefox, but it's gone after re-booting my PC.
Any way to fix this?
Also one side question. Why do certain parts of this website appear in Russian? I'm not Russian, and never used a Russian language setting before...=S

I've been having this problem and posted a solution that seems to work on my blog:
[http://formattc.wordpress.com/2011/03/04/mac-os-x-10-6-snow-leopard-disappearing-dock-icons/ Fix Disappearing Dock Icons in Snow Leopard]

Why does my menu bar keep disappearing from the top of my browser?

Every day I have to right click to add the menu bar to the top of the page (File...Edit...View...Bookmarks,etc.)
this is very annoying.

Does it disappear while you are using the browser, or when
you start Firefox?
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Why does my mail application keep shutting down?

Every time I open mail it comes up saying Mail quit unexpectedly - Click reopen to open the application again and when I do reopen the same thing happens again. Can anyone help?

I would try this. Open Mail and in the title bar on top click on Mailbox then scroll down to the bottom of it's offerings and click on Rebuild.
If that doesn't help post back!
DALE

Why does my airplay icon keep disappearing from my ipad?

Airplay icon is very unstable. I have tried all suggested remedies. Restarting router makes it appear but then it goes off again after a short time. Sick of resetting router - everything else works fine - this happens simultaneously on both our iPads. Any help appreciated.

How to Fix: AirPlay Icon Missing
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
AirPlay Icon Missing in Control Center
http://appletv2.com/airplay-icon-missing-ios-7/
 Cheers, Tom

What is application memory and why does my macbook pro keep running out of it?

what is application memory and why does my macbook pro keep running out of it?

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
          A long-running process with a memory leak (a kind of bug)
          Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
          View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Why does my Adobe Audition keep crashing on my MacBook Pro?

Why does my Adobe Audition keep crashing on my MacBook Pro? I've updated everything, and there are no other issues. It is OS X and Audition CS6. When I'm mixing a track, it will just shut down with a crash notice. Very frustrating.

Hi,
What is the crash notice you receive? OS X is very good about keeping extensive, detailed crash logs. If you launch Applications > Utilities > Console.app and open the "User Diagnostic Reports" group on the left, can you drag the most recent Audition crash report into an e-mail to [email protected] ? The contents of that file should make it more clear to us why Audiiton or the OS thinks a crash is happening and will help focus troubleshooting.

TS1363 Why does my I-Tunes keep shutting down every time I try to go to the I-Tunes store?

Why does my I-Tunes keep shutting down every time I try to go to the I-Tunes store?

Hi sidro1!
Here is an article that will help you troubleshoot this issue with your iTunes application:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Why does my mac book keep shutting down? I mean it's on and then off suddenly

Why does my mac book keep shutting down? I mean it's on and then off suddenly

Do any informative dialogs appear after you restart it?
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Still having problems? Replace steps 6 and 7 with the following:
Reconnect just the MagSafe power adapter.
Press the power button to turn on the computer,
Then reconnect the battery.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Why does my itunes account keep getting disabled?

Why does my itunes account keep getting disabled everytime I try and redownload my music?

Hey there jnsprad12!
I have found a couple of articles that may help you get those passwords into your Keychain application. Those articles can be found here for Mountain Lion:
Mail (Mountain Lion): If Mail keeps asking for your keychain password
http://support.apple.com/kb/PH11785
and here for Lion:
Lion Mail: If Mail keeps asking for your keychain password
http://support.apple.com/kb/ph4915
This article may also be relevant if you are using Lion:
Lion Mail: Use account passwords
http://support.apple.com/kb/PH4859
Additionally, if you are still having issues with your emails requiring your passwords frequently, contact your email administrator or provider or visit getsupport.apple.com to choose an option for contacting an Apple technician for them to help you resolve this issue. Thanks for using the Apple Support Communities!
-Braden

Why does my mailto application keep disappearing?

Similar Messages

Maybe you are looking for