Why does my MBP freeze when I close an application?

This doesn't happen all the time by any means, but it happened enough for me to think that I need to reinstall Lion.
After a lengthy installation process (which was very painful btw), Lion is back up and running but in the past hour has crashed twice whilst exiting an application.
Either by using CMD + Q or going to the file menu and clicking quit, Lion intermitently crashes, the mouse cursor disappears and I am forced to hard reset the machine.
This MBP is only two weeks old, which makes this even more frustration.
What are my options?
Regards,
Jon

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Similar Messages

Why does my FT freezes when it starts? or simply wont process the call?

why does my FT freezes when it starts? or simply wont process the call?
Facetime really *****...!

Are you running iTunes 10.5.3?

Why does my computer freeze when updateing if i have enough disk space and no disk repairs are needed?

I have problems updating my softwarebecause my computer freezes when it restarts to install. I have enough disk space and I checked for disk repairs and everthing is ok. Still can't update and not my cumputer is taking longer to turn on. There is an earth blinking then i get the apple logo blinking before it turns on and this takes close to 5 minutes.

When you say, "disk repairs" are you referiring to permissions or verifying the disk because clearly there's a problem.
Boot from your install disc, run Disk Utilty to "verify" and if necessary repair the startup disk. (Not Verify Disk Permissions).
Using Disk Utility to verify or repair disks

Why does my itunes freeze when syncing i pad

My itunes freezes up when syncing i pad. freezes when checking for purchases on i pad.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Why does my computer freeze when it is trying to update the software?

My computer is currently Mac OS X 10.5.4 and it is trying to update to 10.5.8 but every time i try to update it just freeze when it shuts down to restart and install.

How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
When you have problems updating software, that's a good time to check the startup disk. Launch Disk Utility /Applications/Utiliites
Follow instructions here > Using Disk Utility to verify or repair disks

Why does Firefox 7 freeze when I paste a filename when printing to a file using Microsoft XPS Document Writer?

This is more of a bug, and it doesn't seem to happen all the time.
I like printing web pages to Microsoft XPS Document Writer (.xps) format. FF7 seems to freeze often when I paste a filename (usually from copying something, like the title, from the web page itself) after trying to print to a file using Microsoft XPS Document Writer. I think it may be that I wind up copying some special formatting (or maybe a line break) and that causes FF to freeze (I then have to force-close it using Task Manager). Just a bug that I hope the developers will note and fix.
Another question, not quite related to the above, but is there a way to save an html web page to save only the text stuff? When I save to Text File in Firefox, I usually wind up with all the html crap in it too, when I just wanted the text content portion. TIA.

Can you undo the system restore?
Note that using System Restore can cause your Firefox installation to get corrupted because not all files are restored (only files in a white-list), so be cautious with using System Restore.
*You may lose data in the Firefox profile folder like .js and .ini files pr profiles.ini can be affected.
*You may need to (re)install software that was affected.
In case you need to reinstall Firefox then you need to delete the Firefox program folder before reinstalling to make sure that all files get replaced.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Why does photoshop 13 freeze when working in Editor

Two months ago I had difficulty starting Editor when working in PE 12 and after lengthy chat lines with adobe support I was advised that PE12 was corrupt and I should update to Photoshop Elements 13. I reinstalled windows 7 and then Photoshop 13 and this worked fine until recently. Now when working in Editor after editing photos for an hour or so Editor freezes. It seems to be after I have printed off photos. The only was to close Editor is to go into the Task Manager. Anyone else had similar problems?

Brian, another way of looking at this is: how many devices do you have connected to the USB port (the same one)? I've found through using external storage devices that one port can handle two devices. I had four going at once one time, but the same thing happened, only two would evenually connect.
There's a limit to connections per USB port, I'm just trying to see if you have too many connectins on one port. If so, obviously, if you have other USB ports available, plug the nano into it's own port and see if that "cures" the missing nano.

Why does my iPod freeze when I plug it in?

Everytime I plug my iPod classic into my computer, it freezes. It turns on, so it knows something has happened, but it freezes and doesn't get recognised by the computer, and the charging symbol doesn't appear on the battery. Then I unplug it, reset it, and plug it back in, and the computer reads it. This happens every single time I plug it in. Does anyone know how to fix it?

The cause of all this problem, is the iTunes having timeouts accessing the iPod, so to prevent it happening I would suggest the following, when you want to plug in the iPod.
Disconnect all other USB devices, except keyboard and mouse
Use the USB2.0 port (at the back of the desktop, if you are not using a notebook)
Do not use any USB Hub.
Antivirus or other plugins conflict with iTunes - Stop the Antivirus and plugins,
Disconnect from Internet, as malware and other broswer plugins interferes with the Sync.
But do the iPod Disk Diagnostic as posted earlier by tt2, it wont fix your problem, but let you know if your Hardisk need replacing.
Have a nice day!

Why does my Firefox freeze when I open my news feed on Facebook?

For a few days now, everytime I go to my news feed on Facebook, Firefox freezes and I have to force it to stop. This means everytime I click on the Facebook logo or go to www.facebook.com.
I have already reinitialised Firefox, but that doesn't help the problem.
Why is this happening?

Ok... I found a temporarily fix... go to facebook.com, then click the (X) button in the bar to make the page stop loading. it should only be half loaded... if firefox locks up, you waited too long. Click on your name in the corner. Then when that loads, click home, next to your name!!!!! There is your news feed! Hope this works... It worked for me. Enjoy!!!

Why does my MBP hibernate when the power flickers

I usually have my computer (MBP 3,1) hooked up to a powered 4-port USB hub. If the power goes off then when it comes back on my computer hibernates. Unplugging the USB hub from the computer before the power comes back on is sufficient to prevent this. Why would it do this? (My battery is fine.)

The hub tries to pull the juice it needs from the MBP and it is overloading the bus. If you put the hub and anything connected to it and AC power on a UPS this will not happen.

Why does iPhoto keep freezing when I edit pictures, forcing me to have to keep quitting it?

Hi.
I have an imac and an iomega external hard drive on which I store the pics in iPhoto.
Each time I decide to edit a picture, after about three steps ( crop, change to B & W and then sharpen for instance), the thing just locks up, which is when I have to 'force quit' the application.
It is driving me to absolute distraction... this should be a simple task.
Any answers as to why this happens would be much appreciated.
( All software is up to date)

I have not used iPhoto '08 in a very long time, so I hope TD is still following this thread.
This 2008 Mac has 1GB of Ram, which I don't think I can expand/add to?
If you can add to the RAM will depend on the model.
But 1GB might be insuffícient, if you are processing very large image files. What kind of images do you have? Are you processing large scans or moderately sized jpegs?
I'd refrain from running any other programs concurrently, while working with iPhoto. Close Safari and any other app that might be needing much RAM.
If you did not import anything new, I'd try to repair your iPhoto library. Make a backup, before you do that.
Launch iPhoto with the Command+Option keys held down and rebuild the library.

Why does my Macbook freeze when I try to transfer my Powerbook files

Hello out there
I have been having trouble with my PB and could not retrieve any of my files... the bash shell appeared. I thought my files were gone forever.
I was able to find my HD through utility disk, great!
The problem is that I am trying to retrieve my files with a MB, but it freezes everytime I tried to move the files from PB. The spinning rainbow wheel appears?!!!
Utility Migration doesn't work either...it doesn't see my PB HD. Is the problem that the system run under two different X programs? Jaguar, Tiger?
Should I put in the utility disk in my PB ??
I can't think of any other problem.
Help please : ) My my senior thesis depends on it.
Thanks
Mac OS X (10.3)

I have the same issue. When I click on the button search image (of the web page I want to add a picture on) nothing happens. If I try to change web page or website, the picture window appears but is frozen and I cant select any pictures or even cancel the request. I then need to force quitting Safari because of it.
Help me

Why does my machine freeze when applying oil paint filter in Ps CS6?

HAF 932
ASUS P9X79 Deluxe Intel X79 Motherboard
Intel Core i7-3930K Processor
Thermaltake CLP0564 Frio Dual 120mm Universal CPU Cooler
1200W cool master Power Supply
PNY VCGGTX570XPB-CG GeForce GTX 570 Video Card
Crucial CT256M4SSD2 M4 2.5" SSD
4 Hitachi HD 1TB
Ultra U12-40529 Aluminus 3.5" Internal Card Reader
Lite-On iHES112-04 12X Internal Blu-Ray/DVDRW combo drive

Glad you got it working.
I don't have a clue what "dxdiag.txt available for viewing and a Piriform Speccy .xml file as well and post a screenshot from Process Explorer" ..... and I'm ok with that
A bit of an explanation so you may understand why I asked for this information. When people have strange things happening to their system, it is often very difficult to give the information required for others to help them. They often do not even know all the intricacies of their own system in detail, they may have corrupted their system in the past with some software they have installed and forgotten about it, they may have a myriad of things in their system that they are not even aware of.
Instead of asking a huge amount of questions and prolonging the thread, there are some basic tools, that can give answers very quickly.
If you go to Start and type in DXDIAG.exe, then choose Run 64-bit Dxdiag and then Save all information, you generate a pretty complete diagnostics file of your system in .TXT format, which can be very helpful in finding problems, like outdated drivers, remnants of older drivers no longer used, codec corruption, and a whole bunch of other useful information to help troubleshooting.
Next go to the site Piriform Speccy and download and install Speccy wherever you want to. After installation, run the program. You will see a screen that shows the summary of your system. Now from the top menu select 'File' and 'Save as XML'. Select a file location and a file name that is both easy to find and easy to remember. That information is a complete overview of your system, plus all number of details about the components. It saves you from figuring out all the details of your system and gives us a good chance to look at possible causes of your problem.
Next, install Sysinternals Suite and run Process Explorer. This will show all the processes running in the background and can help pinpoint unnecessary memory hogs or CPU stealing processes. It shows how well a system is tuned and can be very informative to help solve strange problems.
The first two files need to be made available on a website for viewing by others, the results from step 3 can be attached as a screenshot. If people follow these steps, identifying the cause of a strange problem is a lot easier.
You don't need to do that anymore, but I figured I owed you an explanation about what I asked and why.

Why does my keboard freeze when I plug in my ipod shuffle?

Hi for some reason my ipod shuffle which has worked really well up to now (and still works) freezes up my keyboard as soon as I put it in the usb. I have tried all variations of usbs all work fine except with the combination of ipod shuffle and keyboard - a mystery. Have checked the shuffle with other apple computers and it is fine. Also keyboard works great when ipod shuffle removed can anyone help?

Brian, another way of looking at this is: how many devices do you have connected to the USB port (the same one)? I've found through using external storage devices that one port can handle two devices. I had four going at once one time, but the same thing happened, only two would evenually connect.
There's a limit to connections per USB port, I'm just trying to see if you have too many connectins on one port. If so, obviously, if you have other USB ports available, plug the nano into it's own port and see if that "cures" the missing nano.

Why does my premiere freeze when i open my project

all of a sudden right when i open the project i was working on for hours last night, just freezes and i see the mac beachball spinning around forever until i force quit. I've updated the app and reset my comp a bunch to no avail. please fix I need to finish this video project or else i'll just go back to FCPX

Refer to this article
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717

Why does my MBP freeze when I close an application?

Similar Messages

Maybe you are looking for