Why does my media want to export as a MXF when I match the sequence settings?

I've made films with Premiere CC before and have never had this problem, I go to export I click the box to match my sequence settings and it will export as a MPEG, and now, it wants to export as a MXF. My computer doesn't recognize MXF files. Is there any reason why this may be happening?

Thanks so much you guys. So I don't know what was up with my computer or my software, but, it used to be that I had to check the match sequence settings to get my project to export with the same video dimensions. But, I have now fixed it! Thanks so much! Now I have better quality and I'm doing it right

Similar Messages

Why does my macbook pro keep shutting down by itself when I close the lid?

My macbook pro is shutting itsself down when I close the lid. Does anyone know why this is happening?

Solution may be found if you search in the "More Like This" section over in the right column.

Does Premiere re-render video clips if they match the sequence settings?

I am new to using Premiere Pro CS5.5 and also a consumer lacking a detailed understanding of digital video inner workings, so excuse me if my question is obvious.   I have some older video clips, roughly 15-30 minutes in length. I would like to combine these into one file - without any loss of quality if possible.    So for example I imported two clips of the same format into PP.   I created a new sequence by dragging one of the clips to the magic button. Then I drug the second clip and placed it right after the first on the same sequence.   I made no other changes - no transitions, titles, effects etc.   Then I exported the sequence where I selected use the same settings as the sequence.
Two questions: 1) will PP re-encode/re-render the video such that I lose quality?     2) if you were simply trying to combine two or three video clips / files into one, would you go about it as I did here or would you do something different?
Let me know if you need more information and thanks.

The clips were orginally on miniDV tape, captured with Ulead/Corel VideoStudio in 2001, then output into another format. I found a shareware utility that reported "MPEG2" as the codec.   So I would assume then as you noted these would be re-encoded?   Would you expect a loss of quality that would be noticeable?   Combing these clips isn't required, just some housekeeping.   What would you do here?   Thanks for the help.
Here is the output from right clicking on properties of one of the clips:
File Path: ***.mpg
Type: MPEG Movie
File Size: 427.8 MB
Image Size: 720 x 480
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:12:50:21
Average Data Rate: 567 KB / second
Pixel Aspect Ratio: 0.9091

Why does Verizon Wireless ask to confirm my email address when I touch the Google Chrome app, but not respond when the correct info is entered?

I touch the Chrome app icon on my Droid and a Verizon message comes up. It asks me to confirm my email address as shown on the screen, and has a field for entering my billing zip. When I do so, it flashes as if processing but comes right back to the same screen with the zip code field empty. I went on line and confirmed that all info in my profile was correct. Anyone out there with the same problem and/or help?

Lets get to the bottom of this, Dwix! I personally use the Google Chrome application and love it. I am confident that we can figure it out together. Did you just start using the application? Have you had this message pop-up before? You mentioned that it is a Verizon Message, does it come in a form of a text message? Is it possible for you to send us a screenshot of this message?
Please share the details needed so that we can better assist!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Why does my screen keep flashing and then turn black when I use the marquee tool?

When I bring up a photo to work on and i try to draw circle or square with the Marquee tool my screen flashes black and then stays black until I use the move tool?

This issue is associated with your graphics driver not being compatible with PS' hardware acceleration. Updating the driver if possible would be advisable, otherwise turn off OpenGL drawing under Preferences --> Performance.
Mylenium

Does Adobe Media Encoder save/export in swf format?

Does Adobe Media Encoder save/export in swf format?
If yes how?
Thanks

SWF is not a video format. That is why the Flash Video (FLV and F4V) formats exist.
The are very inefficient ways of making SWF behave in some ways like a video format, such as creating a SWF file that uses a sequence of JPEG or PNG image frames, but such files are enormous and have other problems. After Effects has this option, which was created before Flash Video (F4V and FLV) formats were invented, but that does not mean that a modern video encoder like AME should add this very obsolete feature.
The way that people create video for Flash Player is to create F4V or FLV files. You can embed or link those in a SWF file using Flash Professional.

Why does my printer automatically go to send a fax when I just want to print?

Why does my printer automatically go to send a fax when I just want to print?
This question was solved.
View Solution.

Hi pa_tom,
In your printers folder on your computer, is the default printer set to your printer, or your printer- fax?
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Photoshop elements 12 keeps wanting me to register the product after installing but keeps telling me I have no internet connection or the clock is wrong, why does it keep asking me this? I have register online via the main webpage.

Photoshop Elements Photoshop elements 12 keeps wanting me to register the product after installing but keeps telling me I have no internet connection or the clock is wrong, why does it keep asking me this? I have register online via the main webpage.

Hi,
You need to sign in when using Photoshop Elements 12 as it is the method of activation. If you sign out it deactivates that installation.
If you are having problems, see if the following helps.
Sign in, activation, or connection errors | CS5.5 and later
Good luck
Brian

Why does window media player auto starts in firefox browser

why does window media play auto starts in firefox browser
== This happened ==
Every time Firefox opened
== I put a code in for a radio station on the net i listen to on my site

Your More system details list show the WMP plugin (np-mswmp), so that should be working.
See:
* http://kb.mozillazine.org/Testing_plugins
* http://www.vdat.com/techsupport/windowstest.asp

Why does Garage Band want to access my contacts?

Why does Garage Band want to access my contacts? (on my ipad)

When does it ask you? When you are sharing a song to iTunes? Then it will use this information to auto-fill the artist data.
Regards
Léonie

Why does my school want to put a provisioning profile on my iPad?

My school requires us to have an iPad and wants us to install this provisioning profile. What does the profile do and is it going to mess up my iPad? Will they even need this in ios 6 ?

What a coincidence. Part of this question is even worded EXACLTY like yours is worded.
hexia
Aug 1, 2012 9:44 PM
Why does Our company want to put a provisioning profile on my iPad?
Our company requires us to have an iPad and wants us to install this provisioning profile. What does the profile do and is it going to mess up my iPad? Will they even need this in ios 6 ?
iPad 2, iOS 5.1

HT1245 Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s.

Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s. I have looked onlime at several threads and there are no real answers as to what I need to do or am doing wrong.

I am also having this issue.
I've just spoken to someone in the Apple Support Centre who advised me that since the product is in beta, he is unable to assist. I wanted to find out whether someone was able to delete the data for me, or 'reset' the photos app somehow. This apparently cannot be done. He suggested I provide feedback via the feedback page, which I will do, but to be honest doesn't fill me with a lot of confidence in the issue being fixed.
I also deactivated the service and waited the 30 days for the pictures to be deleted - this should have been completed in mid-January. Instead, my iCloud.com Photos page is now showing the photos that should have been deleted as grey squares, just as you described. I am also unable to delete these photos; every time I try, I get the same message about a server error.
I am also unable to disable the service by enabling and then disabling it on my iPhone. Each time I have tried this it hangs on uploading for several hours, with the progress bar not moving at all. When I disable it on my iPhone, the web app remains unchanged.
If anyone has had this issue and has managed to fix it, PLEASE share your wisdom. I am out of patience!

I have my wallpaper/screensaver pointed at my iPhoto album. why does a photo of half dome pop up occasionally? where is the photo stored?

i have an late '09 27" iMac upgraded to yosemite (I've accepted all upgrades from apple along the way). i have my alternating backgrounds & screensaver pointed at my iPhoto album. so why does a photo of half dome pop up occasionally? where is the photo stored? i have been to yosemite many times and do love the scenery there, but i'd like to be in charge of my screensaver. i've tried looking for the photo by name/name fragment, but of course, if apple doesn't want us to find it, we won't find it. i don't like apple preventing me from setting up background/screensaver to my liking. apple makes the computer for the rest of us.

You're welcome.
have you noticed for yourself if these photos are always mixed with one's selection via system preferences?
Actually no. What I have always done was this: I have a collection of custom desktop pictures I made a custom folder for the pictures & placed them inside the Machintosh>Library>Desktop Pictures folder.
Then I went into System Preferences>Desktop & Screensaver>Desktop, clicked on the plus sign to add my custom picture folder.
Restarted my comp.
Never had any issues by doing the above. I have always done it this way since the Tiger OS.
OS 9.1 rulz!

Why does my cellphone keep saying that estimating time remaining when I try to upgrade the system?

Why does my cellphone keep saying that "estimating time remaining" when I try to upgrade the system?
Is there anyway to fix this situation?

Hi Eric_Sun,
Thanks for visiting Apple Support Communities.
You may want to update your iPhone using iTunes on a computer if your device only shows "estimating time remaining" when you try to update wirelessly:
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
You can find these steps here:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
If you are still not able to update, I recommend the steps in this article next:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy

Why does my IPad put I's, which is not a word, for the word "is"?

Why does my IPad put I's, which is not a word, for the word "is"? This I's driving me crazy!

You probably typed an error that got accepted in your keyboard dictionary. To get rid of it, reset your keyboard dictionary. Go to Settings > General > Reset > Reset Keyboard Dictionary. This resets all the suggestions you’ve made to the dictionary.
To accept or reject dictionary suggestions:
To reject the suggested word, finish typing the word as you want it, then tap the suggestion to dismiss it before typing anything else. Each time you reject a suggestion for the same word, iPad becomes more likely to accept your word.
To use the suggested word, type a space, punctuation mark, or return character.

Why does my media want to export as a MXF when I match the sequence settings?

Similar Messages

Maybe you are looking for