Why does my nested sequence need rendering?

Folks, I have a twelve sequences that are fully rendered and I am nesting them onto one timeline. The new timeline has the same settings as the other sequences. Why do my already rendered timelines require rerendering on the nested sequence? Is there any way around this. It would seem there's some way to take already rendered sequences and line them up on one sequence without having to rerender.
The project is XDCAM EX 1080p24

Nevermind folks, I figured it out. I had my render control settings set to Apple Pro Res on some timelines.

Similar Messages

Why does my nested sequence have only one channel of audio?

Hi,
Working in Prem Pro CC on my Mac Pro.
I have a number of interviews, each shot with 3 cameras and with audio from a separate audio recorder. The audio has two channels, Ch1 has the boom mic and Ch2 a radio mic.
I created a sequence, placed the audio into channels 1 & 2 (they are linked) before placing the video tracks onto timeline tracks 1-3. Everything's synced nicely and so I nested the shots and then I enabled multicam on the nested sequence.
However, now when I edit the nested sequence into my edit sequence, it has only one channel of audio. I tried Modify>Audio Channels but within that page, in the option to select 'Source Channels' the options are "None" and "Channel 1".
How do I get my nested sequence to place both audio channels into my edit sequence?
Any help much appreciated.

Nevermind folks, I figured it out. I had my render control settings set to Apple Pro Res on some timelines.

Does a nested sequence keep its render?

I have a nested sequence within my Main Sequence.
Within the nested sequence is Adobe Dynamic Linked clips to After Effects.
I cannot edit these while un-rendered.
If I take the hours to render the data within the nested sequence, and then when moving that sequence in the main sequence, will Premiere have to re-render the initial data?
Or, does it have a memory of the data that is rendered within the nested sequence so it won't be as graphic intensive?

Run a short test and see for yourself.

Why does my project not stay rendered ?

Hi, things are generally going swimmingly.
However, after rendering for smooth play of titles and fx and then closing, upon opening the project again, the render is gone and I must render again. Is this the norm? Why don't those areas stay rendered. I understand that if I change a title or transition, it will be necessary to render. It's just annoying to have to render each time I open the project.
Also, I get occasional messages that there is a major problem and Adobe has to close. Which it does.
toutmeister

John,
You are correct that the Rendering should "stick," no matter how many times you Close/Open the Project, or reboot the computer. Still, some users report issues with the Renders sticking.
For starters, the Renders are basically "proxy files," that PrE (or PrPro) uses for smoothest playback. These files are linked to in the Project file, the PREL in PrE, or the PRPROJ file, in PrPro. Sometimes, those links can be broken, and for various reasons. Usuallly, if the link is broken, the program will ask "Where is Render file _____.AVI?" though not always. In most of the cases of "missing" Render files, no dialog screen appears.
Some of the elements that can contribute to the missing Renders are:
External HDD's used for the Scratch Disks
Networked drives used for the Scratch Disks
Some totally unknown problem
The first two are usually obvious, when the question, "where are your Scratch Disk files located?" but for the third, its a mystery, and fortunately only affects a few users. If there is no issue with #'s 1, or 2, then it's a case of # 3. Do #'s 1, or 2, apply in your case?
If it's any consolation, it seems that # 3 also happens with PrPro CS4 and CS5, and even Adobe does not have a cause, or fix. From following these issues, when # 3 hits, there seems to be nothing in common, between the Projects of those, who are "bitten." Each case seems different, and many of those users only have it with a single Project. The next half-dozen will stay Rendered. So far, it's been impossible to track this down, or even identify a Project, where it is likely to happen.
Sorry that I do not have more to offer, other than to say, either Re-render, or if it's not really necessary, let it go. I have many Projects, where playback is adequate, and I do not bother to Render, while I have others, especially with a lot of Keyframed animation, where I might Render a section dozens of times, while I adjust things.
For some more background on Rendering, see this ARTICLE.
Good luck,
Hunt

Why is my nested sequence layering the effects?

Hey Everyone,
So after I color correct my master clips, I sync them, remove the unwanted audio, then nest them. BUT, in the nested sequence it seems that all the video tracks layer the video effects throwing my nested sequence in a horrible color landscape of overexposed or over colored clips! Can anyone help me?
Mike Diaz

JSS1138,
I apologize for the confusion, I'm new to Premiere CS6. When I import my master clips, I lay them on their respective video track 1, 2, or 3 because I usually only shoot with 3 cams (see screen shot) I label them for what camera footage they are: Camera 1, Camera 2, and Camera 3. Then I bring them into the sequence on individual tracks stacked so Plural Eyes can sync them on top of what will be my main audio recorder. Then Plural Eyes imports the all the video and audio clips back in Premiere but now all the video clips are in sync with my main audio source. Now I will have a sequence with 3 video tracks with their respective clips from their own camera synced up but not color corrected or nested on one video track yet. This is where I color correct each camera on their own video track and apply to the entire camera's footage. But the problem is when I nest all the video and audio tracks together, it overlays the effects instead of leaving the individual camera with its own effects.

Why does the child class need to implement the parent classes constructor?/

As I was playing around with some code I came across this point :
First Class
public class A {
     public int x;
     A(int i){
          x=i;
          System.out.println("A is initialised");
}Second Class extending it :
public class B extends A{
     private int y;
   // Why do I need this constructor to call parents constructor?
// My guess is so that when i make an object of class B referring to class A it should make sense?
     B(int i) {
          super(i);
          y=test;
public static void main(String args[]){
      A a = new A(1);
      A b = new B(1); make an object of class B referring to class A it should work!!
      B c = new B(2);
      B d =(B) new A(2); --> gives class cast exception!
}I am little confused here, Can someone throw more light on it.
Thanks

You don't override constructors. However, every class, in it's constructor, must call some constructor from the class it's extending. In most cases this is simply super(). However, if your class does not have a default constructor (i.e. you've declared any other constructor, or the sub class does not have access to it, I.E. you've declared it private) then you must include a call to some other constructor in the super class. The constructor in the subclass does not have to be the same as the super class one, but you do have to invoke a constructor from the super class. I.E.
class A {
A(int i) {}
class B extends A {
B(String b) {
    super(0);
}

Why does the iPhone 4 need to send an SMS to activate FaceTime when the iPad 2 doesn't?

Hi there.
I keep wondering why iPhone 4 need to send a international SMS to activate FaceTime when the iPad 2 doesn't?
It cost's 2,50 dkr ($0.48) every time it does that.
I have a mobile subscription where i get 5 hours talk time, Free SMS, Free MMS, Free talk to all with same subscription and 5GB data for 129 dkr/month ($24.77).
But the internation SMS is not free.
And it really bugs me that my danish iPhone has to send an SMS to England to acticate FaceTime that i only can use on WiFi.
I also have a iPad 2 (WiFi model), and it can activate FaceTime fine via WiFi. So why can't the iPhone 4 do that?
I really really need a good explanation to why i have to pay to activate FaceTime.
Why can't you make local numbers to send the SMS too, or do it via WiFi just like the iPad 2.
The strangest this is that you have to be on WiFi to use FaceTime, so why use the mobile network to activate FaceTime?

Where are you, what network are you on and where did you get your phone?
The fact that it uses SMS isn't really the issue here and no-one on this forum can answer the "why" question. We are end users, not Apple. The accepted answer is if it's going to tie facetime to your phone number (which it does) then that's the way it's got to work.
The puzzling part is why it would be sending one to England... unless of course, you purchased the phone in the UK and actually live in another region entirely.

Why does Premiere Pro CC 2014 renders incredibly slow?

Dear Premiere Pro experts
I created a movie with Adobe Premiere Pro CC 2014 and I have serious performance issues when it comes to export the movie.
The first 10% renders pretty fast and takes 1 hour. Then it takes for every additional 1% about 4 hours! (never rendered it to finish so far, 14% max so far)
Here are some facts that might help to isolate the problem:
Project:
Length: 24 minutes in total, splitted into several sequences (up to 4 minutes) and arranged on a "main-sequence"
Input: Cineform AVI files, 1080p, 59fps (I converted GoPro 3+ footage (3D!) using GoPro Studio to the Cineform format for further processing)
Desired Output: Same as input, preserving 3D (Render 3D Intermediate)
Effects used: Warp-Stabilizer (default settings) and Auto-Color (smoothing 1-2 sec) on almost every clip.
Hardware / Software:
i7-3770K @3.5 GHZ (Quadcore)
16 GB RAM
NVIDIA Geforce GTX 970 (also tried with a ATI Radeon R9 290X)
Windows 8.1
SSD for OS and programs, RAID 0 for media files and project, separate drive for rendering output.
Then I tried to render using AME using the same settings. The whole video rendered in about 14 hours what is acceptable in my case. There problem here is that the 3D gets lost, even if I selected "Render 3D Intermediate". The picture for the left eye is the same as the one for the right eye. This is not happening when I do a direct export. But the direct export get almost stuck at around 10%.
There is almost no difference in choosing Software-Rendering and GPU. Also, the GPU has almost no load. Premiere Pro uses the CPU for about 45% (total usage 65%) and takes up 5-9 GB of memory (total usage 65%). Disk usage at around 14b/s.
I think there are two problems. One is that AME renders differently (no 3D) and the other is that the direct export takes way too long.
Can someone help me with any of these problems?
Thank you,
Martin

I did some additional research and found out, that the slow rendering happens with this combination:
- Auto-Color using Temporal Smoothing
- Render 3D Intermediate
Without rendering the 3D intermediate, Temporal Smoothing is not a problem. And without temporal smoothing, Rendering 3D Intermediate is not a problem.
Might this be a problem in the codec or in Premiere?

Why does Verizon find the need to change the look of web pages and divert you to other pages?

Why is it that verizon can't leave well enough alone! It seems everytime I log in I can't, because verizon wants me to go to another page or change my info, I just want my email, I don't want to learn about new products and new offers, If there is a time I feel te need, I will come looking, don't shove it down my throat! Another big problem is when they force you to change something before they will let you accesss your email, reminds me of a trick the Russians pull! (If you know what I mean!) If I wanted my page to look like microsofts page ,I would have their service. If you feel the need to change so often, maybe you are in the wrong business!

It can be annoying, but I think their motivation is good. They are trying to make things better for their customers and I think they have, even though sometimes it is annoying. I think it would be nice if they would advise us when the pages are going to be down for maintenance, In the mean time, you could have another E mail account so you can always get access to your E mail.

Im browsing FB in my ipad then suddenly it shutsdown and then when i open it again connect to itunes appear in the displaY? why does that happened?need help!

Im browsing in my ipad then suddenly it shutsdown, any idea why?

Something went wrong in the iOS if you are getting the connect to iTunes screen. you will have to exactly that - connect your iPad to your computer's iTunes using the cable. You will need to restore the iPad now.
Read this all the way to the end before you begin. Make sure that you read about recovery mode at the end of the article.
iTunes: Restoring iOS software

My music will not sync to my iPhone from iTunes. Why does it say I need more space?

My iPhone and iTunes are all synced up to date as of June 7th. I went to sync my music library. I checked to only sync my selected songs (approximately 1200). It worked fine earlier this week before I updated iTunes. I went to add another 10-20 songs today, and it didn't work. It said I need an additional 4.77 GB of data. I have 2 GB available still on my 16 GB phone, which is more than enough for the 10-20 songs. I updated iTunes after this occurred but I still have the same problem. When I check my music on my phone, no playlists show up but y music and artists are the same as before, minus the new music i added to my iTunes. On a side note, the extra space it's saying I need is about the size of the current music on my phone; it seems to be asking to sync it twice?

Hey there 2Chainz,
It sounds like youre being prompted that there is not enough space. I would use the following article to help resolve the issue named:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
Turn off the music or photo sync option in iTunes for the device.
Click Apply to sync the changes to the device.
Turn the music and photo sync options for the device on again.
Click Apply again to try to sync the device to iTunes.
If the 'Not enough free space' alert appears, continue to step 5.
Turn off the automatic syncing functions for the iOS device. To do this:
Select the iOS device from the iTunes window and click the Summary tab.
Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
Click Apply to sync the changes to the device.
Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
Restore using iTunes.
Thank you for using Apple Support Communities.
Regards,
Sterling

Why does the erase option need a different passcode?

Hi guys!
I'm preparing to sell my iPhone 3GS and I want to wipe the whole thing before I do.
I selected the "erase all contents and settings" option and typed in the passcode and got an error, so I tried again and got another error.
Why the passcode didn't work was beyond me as I've been using the passcode lock for a while. So, just out of curiosity, I tried activating the passcode lock and all was fine.
So my question is, if the passcode works for the lock, why isn't it working for the "erase all contents and settings" option?
At this stage, I'm guessing the two features are using a different passcode. But the problem is, I have no idea what this latter passcode is, nor have I ever known.
I keep complete records for everything I buy, their settings and every service I use, and I have no record of any separate passcode.
Any ideas how I resolve this?

iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS: Understanding passcodes
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
You will have to restore the iPhone.

Why does the App Store need to re-update apps already updated since purchase?

I have noticed that the Mac App Store application flags already updated applications as needing updating when the version numbers of the proposed update and the installed application are identical.
For small apps this is not necessarily a huge problem but for big applications it can be an absolute pain as I have limited band-width at my home address. This costs me time, money (in the case of monthly band-width over-runs) and performance issues.
Is there an easy fix for this? (e.g. tweak / delete a plist file)
Thanks.

This has been a problem since the beginning of the app store. Drives me nuts, too. How long has it been? And they can't get it right? Will they ever get it right? :dunno

Why does Numbers say I need a newer version when I am using the latest version

I am getting the error message "You need a newer version of Numbers to open this file". However, this is a file I created yesterday with this version of numbers.
What gives ? If I ck my numbers version it says no updates available.

Hi Steve,
This is confusing to a lot of people. When you downloaded the new version of Numbers the old version remained on your Mac. The new version is in Applications. The old version is in a subfolder within Applications. The icons look similar so it's easy to think you're trying to open a document with the new version whereas in fact the old version has been activated and is trying to open it.
If you tend to open documents from Finder then right-click and Open With ... Numbers.app (3.0).
Or you can open Numbers 3.0 (the one in the Applications folder, not the iWork '09 subfolder) and open the document from there.
Any icons you had on the Dock before the upgrade are of course still pointing to the old version.
SG

Why does my Flash movie need to be clicked in twice

I'm sure this is something really dumb and simple I haven't
done correctly, but it's my first time actually running a Flash
project inside q browser. I used the html that was generated by the
publish process, and when the page launches, there is kind of a
dotted line around the Flash project and then it seems I first have
to click inside that frame before any of my buttons etc. work. What
have I done wrong?
Thanks for help.

Oh god .. here we go again .. Obviously someone has been
living under a rock
or on a deserted island for a few months :)
This is due to Microsoft IE changes required to avoid
infringing the
(stupid) EOLAS patent. It applies to all Active-X control
that can interact
with the user.
If you are viewing a web site, you cannot really do anything
to fix it,
except complain to the web master
Here is a link to find information on how to fix your website
to cope with
the Active-X active content changes:
http://www.justfuckinggoogleit.com?q=activecontent+IE+ActiveX+Change
Jeckyl
(If that does not redirect, just go to
http://activecontent.blogspot.com)

Why does my nested sequence need rendering?

Similar Messages

Maybe you are looking for