Why does my network name change to the Serial Number of my AExpress?
After setting up a new network with my airport express, shortly thereafter the name seems to change to the serial number of the AE device (ie. Apple Network...). Anyone have any idea why that is happening? It seems to couple with decreased performance/connection to the device as well.
Thanks
so this is my screen when im trying to send myself an email for instance . red color is my mums name and green is my email. "Til" means "too" and "hjem" means "home". So when im trying to enter my own email, my mums name occur. (sorry for my bad english)
Similar Messages
-
I am trying to find the serial number that is required by itunes for troubleshooting. But the trouble is, I don't know what it is.
My computer is a HP (not a MAC). I have the itunes serial number. Before loosing my almost 5000 songs I was using an
older version of itunes. I thought if I upgraded to the new version that I would get my itunes back. When I noticed the songs
were gone was when I was taking saved items from my documents into a new 500G hard drive I bought yesterday. After
loading a bunch of stuff it (not any itunes) I went into itunes and ALL of my songs were gone. What happened? What should
I do? & Where is that serial number they are talking about?Hi Susan,
Not sure why your post ended up in the Apple Server section but here goes.
By default your music should be located in one of the following locations
which you can see by clicking on My Computer
Windows XP - C:\ - Documents & Settings - Username (your name or your login name) - My Music - iTunes
Windows Vista/7 - C:\ - Users - Username - My Music - iTunes
it's unlikely your music has been wiped and more likely that iTunes can't find the library file that tells it what music is in your collection and where it's located. This can happen if you renamed or moved one of the folders above to something/somewhere else. Another idea is to do a search and look for files in a format used by iTunes such as .mp3 or .aac which might show you where they are.
Hope that helps
Beatle -
Why does my line attenuation change all the time?
Why would my line attenuation have gone from 65dB to 72.3dB? I think there is a bad connection on my line, but BT's test equipment says my line is fine.
1st ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:52:21
Downstream:
1.372 Mbps
Upstream:
659.6 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.2 dB / 5.8 dB
Line attenuation (Down/Up):
65.0 dB / 43.9 dB
Output power (Down/Up):
15.0 dBm / 12.4 dBm
FEC Events (Down/Up):
113157 / 9145
CRC Events (Down/Up):
421 / 240
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
1850 / 810
Error Seconds (Local/Remote):
169 / 215
2nd ADSL Line Status
Line state
Connected
Connection time
2 days, 12:34:52
Downstream
928 Kbps
Upstream
446 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
6.2 dB / 11.9 dB
Line attenuation (Down/Up)
72.3 dB / 44.0 dB
Output power (Down/Up)
1.4 dBm / 0.8 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
5666 / 0
CRC Errors (Down/Up)
442 / 0
HEC Errors (Down/Up)
2257 / 0
Error Seconds (Local/Remote)
87 / 0I got a reply from the chairmans office
I’ve spoken with BT
Wholesale again today and I’m waiting on a report coming in from the Chief
Engineers Office.
What I’ve
been doing
I’ve also gone
through all the history available of the work that has been done on your line
and can confirm the following:
Your line is
all copper and is on the best E and D side cables available.
We have changed
the network equipment in the exchange on multiple occasions.
And it doesn’t
look like there is any more physical work can be carried out.
The report I’m
waiting for from BT Wholesale is about a known issue that we have had with
certain exchange equipment which is used to make the phone ring when it is
being called and causing the broadband connections to drop, I need this to
confirm if your line is affected by this specific issue.
I think you
have spoke with Donal earlier today and discussed the option of moving onto an
8meg service instead of the upto 20meg, and you told him this has been tried
before and did not work, can you remember roughly when this was so I can check
it with BT Wholesale?
What happens
next
There is still
an engineer on his way out to you tomorrow between 1pm and 6pm. I’m not sure
what this engineer will be able to do given that we have had it confirmed that
you are already on the best lines available but we will see how he gets on and
take it from there. (Might get a nice surprise!)
I’ll give you a
call tomorrow to confirm the update from the chief engineers office and also
see if the engineer has been out on site with you.
Best Wishes
Chris
My reply
Hi,
Thanks for the reply, some of the information in your email isn’t correct.
The D-side is only the “best lines available” because it’s the only one available!
I had the BB disconnecting when the phone rang, long before going on the new equipment.
They have exchanged the network equipment on “multiple occasions”, even though I told them not to bother because I knew it would make no difference.
The facts are:
NO WORK has been done on my D-side (apart from the connections directly outside my property)
Many people that have had the same fault have told me it turned out to be the D-side
I was told by a BT Openreach engineer that they would not do any work on my D-side because part of it was aluminium. But this now turns out not to be true, so I have no idea why they will not do any work on my D-side.
At the cab, the broadband is the correct speed and works fine.
My caller display, often doesn't work. I think this is the same line fault that causes this.
A leakage to earth was detected on my line, but was never fixed.
My phone often rings 2 or 3 times, when I finish a call. I think this is the same line fault that causes this.
When the BB speed goes up, the router records a huge amount of errors.
A few years ago my BB failed altogether, it turned out to be the connection outside my property. The connection was green and in bad condition. There are loads more of these connections between my house and the cab, they will be just as old or older.
A BT engineers test equipment detected a change in resistance somewhere on my D-side, I haven’t heard if that was ever looked into.
Every piece of evidence points at a bad connection on my D-side, so you can see why I will not rest until I know that all the connections have been replaced. BT wholesales answer of “that there is nothing wrong with your line” just isn’t good enough because the fault still exists. -
Why does this script behavior change with the phase of the moon ?
Can anyone from adobe corp or non-adobe volunteers tell me where to look in their docs to find out why this script change its behavior or how to use the debugger to figure out the same. I read the guide and the whole section on debugger and break points etc well.
try{
this.getField('Button4').strokeColor = color.red ;
app.setTimeOut( "this.getField('Button4').strokeColor = color.green ;" , 500 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.blue ;" , 1000 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.red ;" , 1500 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.green ;" , 2000 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.blue ;" , 2500 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.red ;" , 3000 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.green ;" , 3500 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.blue ;" , 4000 );
catch(e){}
Sometimes the above script cycle thru all the colors in proper order and other time it get stuck.
I have linked it to a button so its part of the button javascript.
Is there a way to craft setTimeOut calls that it becomes a reliable delay ?
How to craft it such that the file does not change and does not have to be saved ? This is wanted in addition but not the essential issue at the moment.
Thanks,
RainbowMAXcount=20
// Create a simple color animation on a field called “Color” that changes every second.
function DoIt() {
var f = this.getField("Button4");
var nColor = (timeout.count++ % 10 / 10);
// Various shades of red.
var aColor = new Array("RGB", nColor, 0, 0);
f.fillColor = aColor;
console.println( 'change' + ' ' + nColor + '; count=' + timeout.count );
if (timeout.count >= MAXcount)
app.clearInterval ( timeout );
console.show();
console.clear();
console.println('Start');
// save return value as a variable
timeout = app.setInterval("DoIt()", 1000);
// Add a property to our timeout object so that DoIt() can keep a count going.
timeout.count = 0;
console.println('End of code');
// And observe the results. I expect your new timer events are conflicting with each other. Note that in the above code the change is performed within the called function and not as new line of code.
I ran it but did not follow your last comment and acrobat disk icon prompts for saving the file. Can anyone remove this "latter problem" ? Can it be solved by any means ? -
Why does my localhost name change when my Mac "wakes up"?
I've turned on file sharing, but each time that my iMac wakes up from sleep mode, I get a message that the localhost name is "already taken", and it appends an integer, e.g., -1 to the localhost name. If I don't reset it back to the original name in System Preferences, each time the computer wakes, it will provide the same message and increment the integer value at the end of the localhost name.
The most obious question would be, do you have many computer on your Network ?
Describe your network.
I saw this problem in different case
- two computers having the same name
- A Local Mac OS X server get confuse and think your computer is another one
(could be related to accessing the network on bothh Wifi and Ethernet and playing aroud :-) -
Why does my network configuartion change?
I have a macbook downstairs in the kitchen and almost always have to restart the modem and airport router upstairs to access the web.
Recently my wife's iMac (upstairs within 20 feet of the router) has started doing the same thing.
Both my iMac and my wife's have an external hard drive for Time Machine so data is backed up.
Would a reinstall of Snow Leopard be likely to help?
Thoughts and comments appreciated.
Thanks,
bartabYou have to decide on a color space when saving from Camera RAW.
Surely you mean Photoshop CS5? -
Why does my mums name occur as the "owner" of my mail when I'm trying to send a mail?
I have checked and my name is registrated in my macbook, icloud, email, phone, appleid etc. Really making me frustrated
so this is my screen when im trying to send myself an email for instance . red color is my mums name and green is my email. "Til" means "too" and "hjem" means "home". So when im trying to enter my own email, my mums name occur. (sorry for my bad english)
-
have used the original ipad for a year or so, have been using an ipad 2 for a couple of months with no troubles. today i am unable to sync my ipad 2 with my iMac. can anyone tell me what stupid thing i have done - i have been trying for several hours!
sunshinecowgill wrote:
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.
You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized. -
The problem about the serial number is invalid
Hello. I am Zhang Chunwu, I downloaded in the network above Photoshop CS6, Adobe ID [removed by admin] is not valid serial number tried many are invalid serial number, you can provide serial number permanent and effective? Thank you!
Hi Zhang (I hope that is the polite way to use your name)
Where did the serial number come from? You should be able to log on to your Adobe account, and find the correct serial number from your Orders page. If this does not fix your problem, you will need to contact customer support, as this is a user forum, and we can not access that sort of information. -
I'm locked out of my IPhone 3 and I cannot find the serial number
This wouldn't be an issue if I could find the serial number. However, since this is an IPhone 3, I don't know if the serial code is on the outside of the device. I set my password, then when I tried it, it wouldn't let me in. I checked on the back of the device to find the serial number, however, it doesn't seem to be printed.
It says: 'Designed by Apple in California. Assembled in China. Model Number: ***** FCC ID: ********* IC ID: ****-******'
I do not know if the FCC ID or the IC ID is the serial number or not. I need the serial number to get service, and I need service to get the serial number. That's my issue.
My computer, for whatever reason, also cannot download ITunes. Although I know there is a way to do 'recovery mode' with connecting the phone to ITunes, I'm having trouble doing that.iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
-
Where is the Serial Number on the GSIII?
Does anyone know how to find the serial number on the GSIII? I want to register it on the Samsung website and can't do it with out it.
quick google search showed it should be under phone settings
if not there then no clue -
While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?
It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.
-
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
Why does my email name go out as Administrtor?
Why does my email name go out as Administrtor?
Hello bqster,
Thank you for using Apple Support Communities!
I would recommend going here:
Choose Mail > Preferences, click Accounts, and then select the ... account.
From: Mail (Mountain Lion): If a Mail account becomes inactive
http://support.apple.com/kb/PH11804?viewlocale=en_US
When you click the account there will be a Full Name field, and that is where you would change the name that gets sent with your emails.
All the very best,
Sterling -
Why does my volume name have -1 suffixe ?
Hi ... Why does my volume name have a «-1» suffixe ?
If it finds a similar name on the network, it will add that.
Also, if a drive gets "lost," that will happen. The original mount point still exists, so when it is remounted, it has to create a new mount point.
If you Go to the Computer in the Go menu, do you see one with and one without the -1?
Maybe you are looking for
-
Oracle Enterprise Manager is not coming up. (Urgent )
Hi All, I have installed Oracle Weblogic 10.3.5 and Oracle SOA 11.1.1.5 and OSB 11.1.1.5 in Production Mode. Now i have started all the servers and they are up and running but i cannot open em , and in admin console -->Deployments --> em is in failed
-
Mapping Migration Issue.
Hi All, We have migrated oracle database and mappings from 11gr1 to 11gr2. We are getting some issues during feed processings. We call mapping for table loads. Table load is failing due to below reasons. 1. ORA-01722: invalid number. 2. CursorFetchMa
-
Cinema4D lite to Ae - External Compositing Tag - drifting... help
Trying to finish a job, at the last stages, everything is good to go using cinema4D lite and Ae Cineware. I've set up a couple of video boards and animations in cinema 4D lite (with external compositing tags) and back in after effects extract the cam
-
Regarding code inspector performance check
Hi all, we encountered the following issue in code inspector the parameter e_t_range is an internal table . and is tranferred as a value in general, this combination does not perform well.it appears to be no tranfer . use reference transfer. we are
-
Could not use color replacement tool because it only works in full color mode: Elements 11
I have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step,