Why does my network peridoally drop on my iPad2 with iOS 6.0.1?

I recently updated my iPad2 to iOS 6.0.1. Now my WiFi network connection peridocally drops out then reconnects (about every 5 seconds). This was a problem with iOS 5 also but was corrected. Why is this same old problem back again??? This is a major power drain and I have to recharge my iPad about every other day (again) whereas it used to last over a week. This is very frustrating!
If Apple spent half the time making sure the "updates" they release are working as they do in trying to promote their latest products, there would be a whole lot more advocates for Apple products out there! As it is, people are just getting fed up with the attitude and looking for an alternative...
Doesn't anybody really care at Apple anymore?

Go into the settings, mail, contacts and calendar and toggle iCloud syncing on and off. The plus should reappear. just a software glitch.

Similar Messages

Why does location services not work on my ipad2 with ios7?

Why does my wifi only iPad 2 location serves not work...worked for years, even when I traveled extensively and returned home. I loaded ios7plus and went out West for the holidays. Worked out West and on return, did not...live in country and worked when I took it to Mickey d's six miles away. Only change is ios7 and it's default to Apple maps. Apple support claimed to have passed this to engineering, but despite my follow ups with them using my case number, they have left me in limbo with a silent phone. This is very wrong and not the apple I have known...very frustrated.

Cause Wi-Fi only iPads do not have GPS receivers in them, nor can they use the cell towers for triangulating position. Best they can do is guesstimate based on the hotspots they are connecting to. They base their guess on a database of known hotspots, which can be incomplete, erroneous or wildly inaccurate. The rise of the problem can be due to any change you or your ISP has done to the Wi-Fi setup you use.
If you need to depend on critical apps that require reliable Location Services, get Wi-Fi+Cell devices next time. They can be used without a SIM chip with no problems (and not paying for cell charges), but GPS will work fine.

Why does my iPad 2 get worse battery life with iOS 7???

This new update has way too much white on the screen even when fully dimmed it seems to use more battery than before. Can there be an update to change that?
And in case anybody asks, NO, my battery has been properly taken care of. Charged perfectly each time. So that's not the issue.

Don't know how much the tips in this article http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/ might help but it's worth a look.

HT1338 Why does my VPN keep dropping out on my new MAC?!?! Could it be anything to do with the MTU settings?

Why does my VPN keep dropping out on my new MAC?!?! Could it be anything to do with the MTU settings?

I am having the same exact problem as you described I can't see your Screen Shot.
Try these methods.. they are supposed to work, but havent for me maybe your luck is different. http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/t
If i go right next to my router the internet works fine but where I used to get 5 bars I get like none and if im lucky 1. Didnt' have this issue 2 - 3 days ago

Why does my network connection time out when downloading iphone 4 software update?

Why does my network connection time out when trying to download iphone4 software update?

I'm having the same problem too. I cannot sync or update over wireless or wired connections ever since I installed the most recent iTunes update. iTunes goes through the complete OS 5.0.1 download only to tell me the connection has timed out just when it seems ready to install. I've since reinstalled iTunes, I've ejected and done hard restarts on both my problem devices. I've disabled anti-virus, anti-malware, and firewall. No change in outcome except that, after doing all this, my final attempt to simply sync my 1st Gen iPad led to iTunes crashing and being automatically closed by windows just before finishing the final step. Is this a cruel joke, because I'm certain I can hear iTunes laughing at me for wasting so much time on this.
Windows 7, 64-bit
iPhone 4 with iOS 5.0
iPad 1 with iOS 5.0

Why does my iphone keep dropping calls

Why does my iphone4 keep dropping calls??? It has been doing it for over a week. Does anyone have an answer.... AT&T says they are not having any problems and I have done everything but restore my phone.

Unfortunately, this has plagued the AT&T iPhone since the original model came out. It's most likely a dead zone causing the issue (I have the sameissue from time to time). You can also get a Micro Cell from AT&T, it's basically just an access point that allows you to pick up a cellular signal at home or work (where ever you set it up).
To eliminate any hardware issues, make sure you're on the latest build of the OS (4.3.3 for the AT&T iPhone 4) - I noticed you're still on 4.3.2. If you don't have a case, I suggest the Apple bumper or any case that covers the metal bezel on your phone, that will help as well.
Also, you can "reboot" your phone. To do this, hold down the metal sleep button on the upper-right corner of your phone until the "slide to power off" slider is displayed, then power off the phone. Wait a few minutes and turn it back on.
Hope this helps!

Why does it tell me my ipad is synched with another itunes library and wants to erase the thing when I want to synch it? I haven't synched it with any other mac but my own.

why does it tell me my ipad is synched with another itunes library and wants to erase the thing when I want to synch it? I haven't synched it with any other mac but my own.

Hi Lisa,
I know from experience that this must be a frustrating situation for you especially if you don't want to loose the music/video content that is currently on your ipod. Unfortunately though you may have to consider re-syncing it as it thinks its currently synced with another computer.
If you bought any music that is on the ipod through itunes you can opt to right click the ipod in itunes and 'transfer purchases' if you authorise your library in the 'Store' menu in itunes. Some reasons for this happening may include some of the following:
Deleting and reinstalling your itunes on the computer.
Removing the account you had on the computer you used itunes in and making a new one. (User account, eg: Lisa).
Changing computers in the past.
A friend or family member syncing it on their computer to give you there music.
A sign of a failing iPod.
Alternatively you can opt to not sync it and keep the music that is on your ipod there but this means you will never be able to update your ipod.
Hope this helps!

Why does the Java method ServletContext.getResourceAsStream return null with a know good path to an xsl file?

iPLANET ISSUE
Why does the Java method ServletContext.getResourceAsStream return null with a know good path to an xsl file?
CODE
ServletContext context = mpiCfg.getServletConfig().getServletContext();
// Debugging
out.print(context.getServerInfo()); // Get server info
out.print(“getRealPath = ” + context.getRealPath("WEB-INF/xsl/RedirectToAcs.xsl"));
String strXslName = "RedirectToAcs.xsl";
InputStream is = context.getResourceAsStream("WEB-INF/xsl/"+ strXslName);
TRACE FROM THE LOG
[26/Jul/2002:08:23:15] info ( 2868): [0][][ClearCommerceCcpaMpi][]getServerInfo() = iPlanet-WebServer-Enterprise/6.0, getRealPath() = C:\iPlanet\Servers\web-apps\ccpa\WEB-INF\xsl\RedirectToAcs.xsl
[26/Jul/2002:08:23:15] info ( 2868): [0][][ClearCommerceCcpaMpi][]strXslName = RedirectToAcs.xsl, is = null
[26/Jul/2002:08:23:15] info ( 2868): [1][][ClearCommerceCcpaMpi][16]ResourceAsStream is null
[26/Jul/2002:08:23:15] info ( 2868): [1][][ClearCommerceCcpaMpi][30]Problem reading XSL file.
DIRECTORY DUMP
C:\iPlanet\Servers\web-apps\ccpa\WEB-INF\xsl>dir
Volume in drive C has no label.
Volume Serial Number is 9457-EBF4
Directory of C:\iPlanet\Servers\web-apps\ccpa\WEB-INF\xsl
07/22/2002 05:54p <DIR> .
07/22/2002 05:54p <DIR> ..
07/22/2002 05:54p 3,086 RedirectToAcs.xsl
07/22/2002 05:54p 3,088 Response.xsl
2 File(s) 6,174 bytes
2 Dir(s) 1,797,405,696 bytes free

I think there's supposed to be a forward slash before WEB-INF.
InputStream is = context.getResourceAsStream("/WEB-INF/xsl/"+ strXslName);

Why does iPhoto shuts down when I select Info with an image selected.

Why does iPhoto shut down when I select Info with an image selected.

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

Why does LabVIEW allow me to have 2 controls with same name

Here's a general LabVIEW question:
Why does LabVIEW allow me to have 2 controls with the same name in the same VI? It seems like this only increases the chances of confusion. Especially when someone is just looking at a block diagram (or documentation of a block diagram).
No other programming language that I know of allows this. I realize that uniqueness of name is not as critical in LabVIEW as it is in any text based language. For example, in a text based language, if I had 2 variables called abc and I wrote a statement
abc = 12;
the compiler would not know which abc was being referred to. In LabVIEW, if we had 2 controls called abc, the equivalent of doing an abc=12 is writing to a local variable (which is always linked to one of the controls) and there is no ambiguity. Still, someone looking at the code cannot figure out which abc is linked to unless he does a right click>>Find>>terminal (or a double click).
Even though I have never and never will name 2 controls the same, I think it would be a nice constraint to see enforced by LabVIEW.
Any input from NI engineers on this?
Message Edited by S G on 12-18-2007 03:38 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Attachments:
Trial1.JPG ‏21 KB

I know when you copy and paste a control or indicator, LabVIEW automatically increments the label. But since you can hide the label, and show or hide the caption, there must be another mechanism that LabVIEW uses to keep track of all the controls. I thought I remember back in the "old days" (ver 6 or 6i) LabVIEW would give you an error if you tried to make two controls with the same name. Perhaps that was LabWindows/CVI.
I don't know where the index is actually stored, but if you look at a property node linked to the Pane, you will see an array of references to the controls and indicators. Since the references are stored in an array, I assume that any local variables are tied to the index of that array. Since the labels themselves are properties of the control, I guess there's no reason to limit what that label is. They all have a unique index number.
Interestingly, this array of references grows from the beginning. That is, any new control or indicator is put at index 0, not the end of the array.
B-)
Message Edited by LabViewGuruWannabe on 12-18-2007 08:45 PM
Attachments:
Labels.png ‏12 KB

I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown. Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching f

I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.

1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

IPad2 with iOS 6 and it changed my passcode. Why?

I just updated my iPad2 with iOS 6 and it changed my passcode. What gives and why did it do that? It has locked me out with no way to shut it down. Any ideas?

iOS 6 did not change your passcode.
If you have forgotten the passcode then you will need to restore your iPad from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't do the restore then you will need to try recovery mode.
Read this: http://support.apple.com/kb/ht4097

Does anyone have Ford sync allowing text messaging with IOS 7.0.4?

I had all the settings working when I was on ios 6, but now that I have upgraded it quit working. I removed the sync from my phone and removed the phone from my phone from sync then paired again. Then set the sync notifications back to on but still no text. Does anyone have ford sync allowing text messaging with IOS 7.0.4?

I need to update, my messaging is now working. Apparently after going through the steps and the settng notifications to on all I had to do was turn off the car, open the door, and then return. When I got in my car this morning the text messaging (recieve only) was working.

HELP! Why does my Drag and Drop not work Completely?

Hello! I'm working on an ActionScript 3 movie clip in Adobe Flash. In the interactive movie I want the user to create a snowman with the parts on the left side. (Picture below.)
On the right side I have the snowman slightly visible, so the user knows where to put the parts. Most of it seems to work... but after I put on the body, hat, and arms the other pieces don't work; like the eyes, nose, mouth, etc. Why does it not work? Can someone help me?
This is how it should look at the end, when the user complets it.
I think I coded this correctly. But I'm not sure. Please take a look at my code and see what the problem is. Thanks!!!
var startX:Number;
var startY:Number;
var counter:Number = 0;
SNOWMAN1_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
SNOWMAN1_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
SNOWMAN2_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
SNOWMAN2_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
SNOWMAN3_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
SNOWMAN3_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
LEFTARM_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
LEFTARM_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
HAT_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
HAT_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
RIGHTARM_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
RIGHTARM_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
SCARF_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
SCARF_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
EYES_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
EYES_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
MOUTH_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
MOUTH_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
CARROT_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
CARROT_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
COLE1_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
COLE1_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
COLE2_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
COLE2_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
COLE3_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
COLE3_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
function pickUp(event:MouseEvent):void {
event.target.startDrag(true);
MYTEXTBOX.text = "";
event.target.parent.addChild(event.target);
startX = event.target.x;
startY = event.target.y;
function dropIt(event:MouseEvent):void {
event.target.stopDrag();
var myTargetName:String = "T" + event.target.name;
var myTarget:DisplayObject = getChildByName(myTargetName);
if (event.target.dropTarget != null && event.target.dropTarget.parent == myTarget){
MYTEXTBOX.text = "Good Job!";
event.target.removeEventListener(MouseEvent.MOUSE_DOWN, pickUp);
event.target.removeEventListener(MouseEvent.MOUSE_UP, dropIt);
event.target.buttonMode = false;
event.target.x = myTarget.x;
event.target.y = myTarget.y;
counter++;
} else {
MYTEXTBOX.text = "Try Again!";
event.target.x = startX;
event.target.y = startY;
if(counter == 13){
        MYTEXTBOX.text = "Congrats, you're finished!";
SNOWMAN1_mc.buttonMode = true;
SNOWMAN2_mc.buttonMode = true;
SNOWMAN3_mc.buttonMode = true;
LEFTARM_mc.buttonMode = true;
HAT_mc.buttonMode = true;
RIGHTARM_mc.buttonMode = true;
SCARF_mc.buttonMode = true;
EYES_mc.buttonMode = true;
MOUTH_mc.buttonMode = true;
CARROT_mc.buttonMode = true;
COLE1_mc.buttonMode = true;
COLE2_mc.buttonMode = true;
COLE3_mc.buttonMode = true;

Below is a more efficient code. I am not sure about chasing parents you do in the code (always bad idea) so this code may be buggy:
var startX:Number;
var startY:Number;
var counter:Number = 0;
// reference to currently dragged object
var currentTarget:Sprite;
var objectCollection:Array = [SNOWMAN1_mc, SNOWMAN2_mc, SNOWMAN3_mc, LEFTARM_mc, HAT_mc, RIGHTARM_mc, SCARF_mc, EYES_mc, MOUTH_mc, CARROT_mc, COLE1_mc, COLE2_mc, COLE3_mc];
activateObjects();
function activateObjects():void {
     for (var i:int = 0; i < objectCollection.length; i++) {
          currentObject = objectCollection[i] as Sprite;
          currentObject.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
          currentObject.buttonMode = true;
function pickUp(event:MouseEvent):void {
     currentTarget = event.currentTarget as Sprite;
     currentTarget.startDrag(true);
     MYTEXTBOX.text = "";
     currentTarget.parent.addChild(currentTarget);
     startX = currentTarget.x;
     startY = currentTarget.y;
     stage.addEventListener(MouseEvent.MOUSE_UP, dropIt);
function dropIt(event:MouseEvent):void {
     stage.removeEventListener(MouseEvent.MOUSE_UP, dropIt);
     stopDrag();
     var myTarget:DisplayObject = getChildByName("T" + currentTarget.name);
     if (currentTarget.dropTarget != null && currentTarget.dropTarget.parent == myTarget){
          MYTEXTBOX.text = "Good Job!";
          currentTarget.removeEventListener(MouseEvent.MOUSE_DOWN, pickUp);
          currentTarget.buttonMode = false;
          currentTarget.x = myTarget.x;
          currentTarget.y = myTarget.y;
          counter++;
     } else {
          MYTEXTBOX.text = "Try Again!";
          currentTarget.x = startX;
          currentTarget.y = startY;
     if (counter == 13) MYTEXTBOX.text = "Congrats, you're finished!";
     currentTarget = null;

Why does my iPhone 4S drop calls with good service

Why when I have 3 or more bars does my iPhone 3S drop calls?

Go to Settings > General > Accessability > Incoming Calls then set to default.

Why does my network peridoally drop on my iPad2 with iOS 6.0.1?

Similar Messages

Maybe you are looking for