Why does my nook open iphoto when i plug it in the usb port on the back of my imac running 10.6.8

I have downloaded Adobe Digital Editions and downloaded Overdrive from the public library. When I plug the Nook eReader in the USB port in the back of the iMac, iPhoto opens immediately. I know this is not a forum for Nook eReaders, but I have to start somewhere and figured since iPhoto is opening automatically, maybe someone can give me a clue.
thank you,

Most likely, because your Mac and iPhoto think that you have connected a camera or mass storage device that has images on it.
Not sure where to go from there, but I would start by looking at the setting in both iPhoto Preferences and Image Capture if I wanted iPhoto to ignore that device.

Similar Messages

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button?

I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?

I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?

Thank you for your reply. I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years. The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import. Now all of a sudden my iMac does not recognise the camera. However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing. So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years. I can only assume that the settings on the iMac may have changed, but I cannot verify this.

My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!

Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

Can anyone explain when the USB port on the Express is really needed?

Back with another question!
My Airport Express is used only for my Canon printer (MP980), nothing else. I know, with hooking up my new Mac Mini, I'll get new drivers from Apple and will need to install some of the updated software from Canon... from what I've read, I won't try to use the disc that originally came with the printer.
Since I'll join my Airport network for printing after my older Mini is disconnected, when is there a need to use the USB port on the Express? I've read that it's used for connecting multiple computers to the network. But, I'm having some confusion with this. With my network up and running, I assume I would be able to use my old Mini and the new Mini on the same network, if I decided to unplug one and use the other one for a short time, since my network settings won't change. (I have but one monitor!). Is a USB connection to the printer only required if multiple computers are shared simultaneously with the printer via Airport Express?? I never really understood this completely. All I expect to do for a few months is occasionally unplug one Mini for the other as I save some files onto disc, etc.
Did I make sense?

JiminReno wrote:
Back with another question!
hello again, jim !
Since I'll join my Airport network for printing after my older Mini is disconnected, when is there a need to use the USB port on the Express?
you can hook up a printer (or a Keyspan remote to control iTunes). one aspect may be location. what if you want the printer in a different room or on a different floor in the house ?
I've read that it's used for connecting multiple computers to the network. But, I'm having some confusion with this. With my network up and running, I assume I would be able to use my old Mini and the new Mini on the same network, if I decided to unplug one and use the other one for a short time, since my network settings won't change. (I have but one monitor!).
yes, you can also share a printer connected to your mini with other client machines.
btw, you could use the +screen sharing+ feature to access and manage the screenless mini.
Is a USB connection to the printer only required if multiple computers are shared simultaneously with the printer via Airport Express??
no, all machines on your network could use a printer connected to either of your mini's or connected to the AX.

Why does adobe bridge come on when I plug in my phone?

when i plug my phone or ipod touch into the computer sync cable the photo downloader comes on (this i like) but also adobe bridge. How can I make it not do that?thanks
kt

You can do it.
Un-check the box as described before, then connect your device(s) & open Image Capture from /Applications.
Select each device in the left pane, & use the 'connecting this camera opens...' dialogue, choosing
the Photo Downloader.app inside Bridge.
First, open a Finder window & select your Bridge application. Right (ctrl) click it & choose 'show package contents'. Open the Contents/MacOS folder inside & locate Photo Downloader.
When you use Image Capture : choose 'Other...' from the list, then drag the Photo Downloader app from the Finder window onto the selection window that opens.
The next time you connect the device, Photo Downloader should open (it does here), with a dialog window including the option to 'Open Adobe Bridge' which you will want to un-check.

Why does my iPhone repeatedly beep when i plug it into my macbook

My phone is repeatdly every 5 seconds making the noise that it makes when you plug your phone into a charger, my phone keeps beeping every time i try to hook it up to itunes on my macbook... has anyone else had this issue?!

Hey there lilcarusox3,
It sounds like your phone is acting like you are unplugging it and re plugging it when you connect it to your Macbook. Thats an odd issue, lets see what we can do here. I would start by using the USB troubleshooting from the following article for iOS devices:
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254?viewlocale=en_US
See if the cable connection at the device or computer has come loose or unplugged.
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPad, iPhone, or iPod touch.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Update to the latest version of iTunes if you have not already.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT1386 My iTune no longer automatically recognizes my iPhone when I plug it in using USB port. Please help.

I jusy upgraded my iPhone 4 with the new IOS7 update. Now when I hook my phone up to my Apple Mac using the USB port, Itunes no longer opens my device. SO I can't move songs on and off the phone. The Device selection under the File menu does not allow me to select my phone. Please help. Itunes has been updated with the most recent version.

DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

When I plug phone into laptop USB port it's unrecognized, but anything else I plug into USB works. How do I know if it's cord or phone? My cord works when plugged to wall outlet to charge.

My phone charges when it's plugged into wall just find, then I try n use cord n plug to laptop to USB port and it's unrecognized. But other thugs worked plugged into USB port so I know it's not the computer. How do I know if it's my phone or the cord itself that is the issue??

See Here for
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591
Also... Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...

Why does my DSL stop working when I plug it into my filter?

This is really annoying. I was having problems with my phone/dsl connection and verizon sent me a filter. Great! I've been using the filter for a while now and the first problem was when I plugged in the filter then the dsl and phone the internet wa very slow. If we tried to watch a youtube video while the filter was plugged in it would be painfully slow!
Now the DSL wont work at all! The little green light disappears in the internet section whenever i plug the dsl into the filter. I work online and need both the phone and internet to work at the same time. Any ideas what to do?

That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Why does my printer not work when i plug in the internet? (ethernet)

hey guys,
i have the Mac connected to a large digital printer via the ethernet connection. works fine, no problems untill i plug in the internet. I get an error message in my software and can't print any jobs, but the internet works fine.
I have a feeling that its a network problem, but don't want to mess around too much with the settings.
This is a company internet connection.
if anyone could advise of the possible network settings, I would be very greatful.
thanks again.

Your Mac sends traffic to the interface at the top of the list in
System Preferences > Network
When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
The solution is to cable that Printer to your Router, not to your Mac.
Alternatively, you could add a small Switch and connect your Mac and the printer to it.
If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

My IPHONE will not Sync when plugged into the USB port, although the it makes the sound that it is charging, Itunes does not recognize that it is there, what should I do?

I have restarted the computer, the IPHONE 4, I have checked for updates, and Have reinstalled Itunes. The Iphone plugged into the usb makes the noise that its charging but nothing else. It does not sync and ITUNES does not recognize its plugged in.
Please Assist.

See also Recover your iTunes library from your iPod or iOS device.
tt2

Why does Sharing Preference open Unlocked when it is Locked before shutdown

Several times over the last few days I have checked the Firewall and found that it has been unlocked after I lock it - without my using a password to unlock it. The first time I found "Network" checked, so I unchecked it and thought it was a fluke, then within about 10 minutes another item appeared to be checked Called "CVS" what are these specific items for? Does this have to do with any security settings by other software?

If you have the Time/Date CP set to check Internet for time, then that explains Port 123.
"UDP port 2401 uses the Datagram Protocol, a communications protocol for the Internet network layer, transport layer, and session layer. This protocol when used over PORT 2401 makes possible the transmission of a datagram message from one computer to an application running in another computer."
MS is famous for opening ports and checking your whole Nerwork for other copies of their SW.
It's also used for "anonymous password authentication"...
http://www.gigascale.org/softdevel/faq/16.html

How did my pdf files get converted from 'open with Adobe Reader' to open with Adobe Acobat'? And if I have a ''free'' Acrobat account why does it not open? When I do click on the account it ask me to pay $89.99. I never wanted Acrobat. How can I get -

How did my stored files get converted from 'open with Adobe READER' to 'open with Adobe ACROBAT'? How can I get them re-set to open with 'Adobe Reader'?
Please reply to my e-mail: [email protected]

It sounds as if you downloaded Adobe Acrobat Pro. If you did, uninstall it. Then repair Adobe Reader.
The free Acrobat account has no connection to any of this.

Why does my nook open iphoto when i plug it in the usb port on the back of my imac running 10.6.8

Similar Messages

Maybe you are looking for