Why does my password save as a different "value" for my POP server.

When I log my info for my work account on the preference page in my .mac account, for some reason the password I use is changed to another "value" . I have looked at the keychain app. no problems there.
I can't get it to save MY password.
This laptop has had interesting problems since day one.
The first time I connected to the net all of my passwords
were changed and I was locked out completely in the first two hours of ownership?
macbook Pro Duo Drive Mac OS X (10.4.5)

The resxxxxxx is your Verizon-created id (vzid). Every account has one, it's assigned when your account is created. Your PWS should by default be located at BOTH of the URLs you listed, even though the Site Builder only lists the vzid. (At the moment, they both show the default "This home page is under construction!" page, so I can't say whether this is working correctly or not.)
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

Why does eye dropper Lab show a different value than the Lightness channel?

Can someone help me understand how the L in Lab color in the eye dropper tool maps to the actual Lab Lightness channel? Both are on a scale of 0-100, but they clearly show different values. Here's a video that show what I mean (note that if I completely desaturate the color, I get the same results, it isn't a color thing).

I cannot read much useful in the OP's video, but I think, the OP is not talking about
HLS- or HSL-Lightness (not available in PS CS6) or HSB-Brightness, but only about
CIELab Lightness in two different modes:
Figure 1:
Figure 2:
The area was filled with a gray L=50 a=0 b=0.
In Figure 1 all channels are selected. The values are correct.
In Figure 2 only the Lightness channel is selected. The value L=54 is wrong.
What might be the reason?
Measurements were always taken inside the area. The RGB-values are the same in both modes.
Please don't verify this by measuring in these Forum-images. These are PNGs in RGB.
Please verify by repeating the trial.
Best regards --Gernot Hoffmann

Why does my app store use a different account for downloading and another for updating apps?

My app store used my own account for downloading and my sister's for updating, and it keeps telling me to reset my account. I already did that the other few times it told me to do that!

Have you restored your device from your sister's backup?

Why does safari not save my passwords anymore? I have to keep signing into everything. Can anyone help or explain?

Why does safari not save my passwords anymore? I have to keep signing into everything. Can anyone help or explain?

Check here: Settings > Safari > Private Broswing > Be sure this is stiwtched OFF.
And check at AutoFill.

Why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas

I am on a IMAC and upgraded to 10.6.8 Jan 2014. I am using CS4 Illustrator to create with. When i save my work as a pdf then reopen the pdf in Ill to make changes, the whole page has:
A.) Multiple clipping paths around it
B.) Most text has now become outlined. Not editable anymore.
C.) Gradient areas have multiple clipping paths of the single gradient area
D.) The gradient areas now become rasterized.
This is very frustrating as now all of my marketing files, some 300+, are worthless. I don't know where to look anymore to find the problem.
Please help.
Thank you very much

John,
I have the presets as you have shown. I had been editing the supplied items as you suggested. Then figured i should ask the questions of those who are better than I.
But still a bit confused as to why the new save places clipping paths around the document.
Thank you John and Monika for your help.
why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas
created by John Mensinger in Illustrator - View the full discussion
I do a save as "pdf" in the format pull down tab. I save to a folder on the hard drive. Where is the "Illustrator editability" check box? I presumed it is in Acrobat some where
but i seem to be lost.
It is in Illustrator's Save Adobe PDF dialog, which pops up before the saved file is written.
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6439399-644928/450-397/Untitl ed-1.jpg
Sorry i didn't mention this, but this seems to have occurred when using images and text from provided pdfs.
That's a critical fact. If you didn't do the original save, the above is moot, and it's too late to exercise any control over the save process. Someone else failed to save for editability. The only thing you can do is clean up/repair the content, (release clipping masks, rebuild rasterized elements, expand objects, etc.), and save correctly as AI. Then, if necessary, re-save as PDF with the correct settings.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6439399#6439399
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why does the password of Apple Id not paste from the clipboard at the Ipad?

Why does the password of apple id not paste from the clipboad at The ipad 2 ?

In most apps, you can't paste into the password field. It's a security risk.

Why does my iPhone 4 have a different Model # than those on display at Appl

Why does my iPhone 4 have a different Model # than those on display at Apple?
I noticed while in my local Apple store today that their iPhone 4's have a higher Model # in their Settings --> About screen. When I compare mine vs. theirs, why is my Model # lower?
My biggest fear is that Apple will secretly correct the hardware issues on the iPhone 4 & screw over everyone who bought it early by not doing a recall since it would cost them an arm & a leg.
See screenshots of both units compared:
http://yfrog.com/md88epx

They are basically batch numbers as posted by several forums other than Apple. One forum in Canada listed 8 batch numbers of iPhones residing in their country with the last code of "C/A". Mine is "LL" for some reason in the USA. I would have thought it would be "US" but there is probably a more detailed thread on this code choice by Apple.
Also review this Apple thread for more:
http://discussions.apple.com/thread.jspa?threadID=1674986&tstart=523

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

Why does the Safari message "This is a non-secure form" pop up everytime I try to use yahoo mail?

Why does the Safari message "This is a non-secure form" pop everytime I go into yahoo mail? If I don't press the send option my whole computer freezes.

From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Why does my IPad not sync with my IPhone for Ibooks bookmarks?

Why does my IPad not sync with my IPhone for IBooks bookmarks? Both Pad and Phone have sync turned on.

I must apologize as I misread your post. I though that you were talking about Safari bookmarks but you post does clearly state iBooks bookmarks.
You may want to just try restarting both devices and see if that helps. One other thing that you could try is quit iBooks on both devices and then launch it again and see if the bookmarks are synced when you relaunch.

I have a local LAN DNS server. My preferences point to that server. Why does dig give me 8.8.8.8 as my DNS server?

I have a local LAN DNS server. My preferences point to that server. Why does dig give me 8.8.8.8 as my DNS server?
Something is/was modifying my DNS preferences to 8.8.8.8 It seems to be pointed correctly now (at my local LAN DNS server), but why was it pointed at 8.8.8.8 before? I never want it pointed to 8.8.8.8

You've hit the nail on the head Ben. For point to point communications, the IP addresses should be fixed, therefore there is no need for DNS. If a DNS is configured, the NIC (Network Interface Card) drivers will try to contact it.
In my test system, I need DNS for the test computer, but I am communicating with a dedicated Spectrum Analyzer over TCP/IP. So I added a second NIC. The main NIC is configured for DNS and all that jazz. The second NIC (plugged into PCI slot) is configured with a hard coded address, no DNS, no Gateway, nothing else. I connect that NIC to the spectrum analyzer using a crossover cable. The analyzer is configured with a hard coded address also. Now my computer can get on our company network, and the spectrum analyzer is isolated from the network, so it can't catch any viruses, etc., and it still talks to the computer. When using a configuration such as this, it is best to use a dedicated address for the 2nd NIC and spectrum analyzer in the range of 192.168.100.0 to 254
- tbob
Inventor of the WORM Global

Why does my iPad 4 keep update requested status for ios8?

Why does my iPad 4 keep update requested status for ios8?

The Apple servers are slammed right now with iOS 7 downloads AND activation requests.
Be patient and try again later.

Why does mac mini with snow leopard download skype for windows instead of mac

why does mac mini with snow leopard download skype for windows instead of mac ?

Are you using this link?
http://www.skype.com/en/download-skype/skype-for-mac/

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

Customisation for PO Release (different Values for different Doc Types)

Dear Experts,
I need to configure for PO release procedure where in the Characteristics would be Plant (2 Plants), Doc Type (3 types - Standard PO, Imports PO & Capital PO) and Value (2 stage release: 0-100000 & >100000 INR for Std PO, 0-200000 & >200000 INR for Imports PO and 0-300000 & >300000 INR for Capital PO).
Please let me know where I shoud define the different Values for different Docs for the Release procedure to work properly.
Or let me know the entire procedure for achieving the same.
Regards,
MNP

Hi MNP,
You have to create different CLASSes in IMG with the possible combination of different characteristics,
EX. CLASS EKKO11 - Plant A, Doc type- Std PO, Value- 0-100000 & >100000 INR
CLASS EKKO22- Plant A, Doc type- Import PO, Value- 0-200000 & >200000 INR
CLASS EKKO33- Plant A, Doc type- Capital PO, Value- 0-300000 & >300000 INR and same for other plant
then assign these classes to the respective Release group.
regards,
Pravin

Why does my password save as a different "value" for my POP server.

Similar Messages

Maybe you are looking for