Why does my power mac G5 say it has two monitors connected when i only have one?

Hi i have a Power Mac G5 and i want to use imovie but its says i need quarts extreme but i cant as my mac is saying i have two monitors

Hello BDAqua
i have
GeForce FX 5200:
  Chipset Model:          GeForce FX 5200
  Type:          Display
  Bus:          AGP
  Slot:          SLOT-1
  VRAM (Total):          64 MB
  Vendor:          NVIDIA (0x10de)
  Device ID:          0x0321
  Revision ID:          0x00b1
  ROM Revision:          2060
  Displays:
HP w2007:
  Resolution:          1680 x 1050 @ 60 Hz
  Depth:          32-Bit Color
  Core Image:          Hardware Accelerated
  Main Display:          Yes
  Mirror:          Off
  Online:          Yes
  Quartz Extreme:          Supported
Display Connector:
  Status:          No Display Connected

Similar Messages

  • Why does my Power MAC G4 keep restarting itself after I shut it down?

    Hi,
    Thanks for reading this.
    Why does my Power MAC G4 keep restarting itself after I shut it down?
    This JUST started happening only 4 days ago.
    Most recent installation was Limewire, but I removed it to see if this problem would go away.
    I have 3 internal drives (See drive types below) that all have OS 10 on them in order to be able to boot up from either drive in the event of trouble.
    However...
    No matter WHICH drive I use as the start up drive... the computer STILL restarts itself after it is properly commanded to shut down.
    Prior to the Limewire install... the ADOBE creative suite was installed.
    There is a Lexmark X83 printer hooked to the computer, which, it seems doesn't matter if it is left on or off... the computer still restarts itself.
    Any ideas?
    Thanks!
    PowerMAC G4(2002 Quicksilver)   Mac OS X (10.4.5)   2 Seagate SATA 250GB drives, 80 GB Seagate ATA drive, Digital Performer 4.6
    PowerMAC G4(2002 Quicksilver)   Mac OS X (10.4.5)   2 Seagate SATA 250GB drives, 80 GB Seagate ATA drive, Digital Performer 4.6

    Hi, Tommy!
    If you still have problems, trash the following three preference files, then shut down and do a PMU reset. (PMU reset procedure for the QS is the same as is shown at the link for the Gigabit Ethernet.)
    HD/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
    HD/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    User/Library/Preferences/com.apple.systemuiserver.plist
    Gary
    1GHz DP G4 Quicksilver 2002, 400MHz B&W rev.2 G3, Mac SE30   Mac OS X (10.4.5)   5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

  • My computer says that I have 3 monitors connected but I only have 2 connected.

    Windows 8 is saying that I have 3 monitors connected but I only connected 2. If recognizes a 3rd monitor that is really small and I don't know why. I have my 2nd monitor setup to be an extention of the 1st one and if I move my mouse all the way to the end
    of the 2nd monitor my mouse is able to move off screen. I'm assuming this is because the computer detects the 3rd monitor to be there but like I said I only own 2 monitors and have only 2 connected. This is very annoying because sometimes things get placed
    on the 3rd monitor and I can't move them to the other monitors because I can't see how to move it because I only connected 2 monitors and for some reason windows detects another even though there is nothing there. I just recently installed a new graphics card
    and before it I didn't have one and my VGA and DVI cables connected to the ports that came on the mother board. When I had it setup like that it was fine but ever since I installed the graphics card it detects 3 monitors when I only want to use 2.

    Hi,
    Did this issue occur before?
    Try to remove all unnecessary hardware, and use Win+P to change screen input option.
    If the issue persists, try to create another administrator account and login for test.
    Karen Hu
    TechNet Community Support

  • Itunes says it is already associated with another account on ipad2 when i only have one account

    I am trying to get my ipad2 to download purchases previously made from itunes. If i go to settings store and slide the automatic downloads for music to on, it says that this device is associated with another account and cannot be changed for 90 days,  i only have one itunes account and these settings are saved underneath. Any ideas?

    I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
    tt2

  • Why does my Power Mac G5 use 5 times as much power after entering Sleep mode automatically as when I put it to sleep manually?

    My Power Mac G5 (4 x 2.5 GHz PowerPC G5) with an Apple 17" CRT monitor, an HP LaserJet 1200 Printer and an HP4570c scanner draws approximately 200 Watts of electrical power after entering the "Sleep" mode automatically, but only 41 Watts of electrical power if I put it to sleep manually.
    I have tried changing the Energy Saver preferences in every way that I can think of, with no effect.
    What am I doing wrong?

    Hmm, 159 Watt diff, that's interesting, can't picture Hard Drives using that much, can you disconnect one devie at a time to test it's not them?

  • Why does my iPad ask for a credit card to buy apps when I already have money on my iTunes account?

    Why does it do that? It used to do that for free apps to but once I put my credit card on it, it stop asking for free apps. But now it still wants a card even though I still have 20 dollars left from a birthday gift card. I heard somewhere that this was because of a new feature to stop kids from downloading apps that their parents don't want them to or buying a bunch of apps and racking up a huge bill, is this part of it?

    Is the card expired? You cannot have an expired card in your account.
    JeffoMcSpeffo wrote:
    I have $17.97 on my account but when i try and buy Doris (worth only $10.99) i need to fix my credit card information, which also keeps saying theres an error
    What is the error?
    Try this -> http://support.apple.com/kb/TS1646

  • Mac thinks that there's a monitor connected when there isn't?

    My MBP thinks that there's an external monitor connected to the computer, when in fact there is not. My solution is to simply use "Mirror display" so that the screen's edges don't lead into another non-existent monitor. However, I'd really like to fix this. I thought this was a software problem at first, but after reformatting the computer, I am starting to believe that it's a hardware problem.
    Does anyone know what's going on here? How can I fix this? Thanks in advance!

    What's bringing you to that conclusion ?
    When you run System Preferences/Displays is it showing something else ?
    Are you sure it's not 'Spaces' at work (multiple desktops) ?
    System Preferences/Spaces - uncheck 'Enable Spaces'

  • Time Machine says it need 21 TB space when I only have a 500 GB drive in the computer.

    Hi,  I have a MacBook and was trying to run a Time Machine backup when I got an error saying: "The backup is too large for the backup disk.  The backup requires 21.09 TB but only 369.26 GB are available."
    I have a 500 GB drive in the MacBook and it only has about 150 GB taken up.  I also have a 500 GB drive for the Time Machine and it is not even half way full.  Any ideas as to how I can make it work?
    I'm running Mac OS X 10.6.7 and I have the lat 2009 white MacBook.  Wasn't having any issues with the Time Machine until just now.
    Thanks.

    It seems you're not alone with this problem.  This is the suggested fix, but I've never tried it myself:
    http://reviews.cnet.com/8301-13727_7-10330105-263.html
    Good luck
    Bob

  • HT1918 How do I delete my debit card off iTunes because it keeps saying my payment method doest work and I only have one

    I can't update , purchase or anything now because my debit card doest have money and I don't want it on itunes

    Hello Kjanzen777,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/HT1918?viewlocale=en_US&locale=en_US
    Change your payment information on a Mac or PC
    Click to open your account in iTunes (you may need to sign in with your Apple ID), or follow these steps:
    Open iTunes and click iTunes Store.
    Click Sign In and enter your Apple ID.
    Click your Apple ID and select Account.
    From the Account Information page, click Edit to the right of Payment Type.
    You can see the payment methods that the iTunes Store accepts in the Payment Type section.
    If you want to remove the payment method, select None in the Payment Type section. See what to do if None isn't showing or you can't select it.
    Change your information and click Done.
    Have a nice day,
    Mario

  • When I updated my Apple TV it shows about 10 computers  on my network when I only have one computer on my network and they are all the same....why did this happen? I only have one computer   linked to the Apple TV

    when I updated my Apple tv it now shows about 10 computers on my network which I only have one tv...how do I get rid of the other "computers" listed as they are all the same, this was not happening before I updated the Apple TV

    It looks to be a bug. A reboot to computer and/or Apple TV may resolve it.
    You can provide feedback to Apple and file a report.
    https://www.apple.com/feedback/
    https://bugreport.apple.com/

  • HT201407 why does my replacement iphone 4s say that is it verison when it should be sprint?

    why does my replacement iphone 4s say that is it a verison when it should say sprint? also was i supposed to be given another SIM card for my iphone?

    sounds like some one made a mistake

  • Why does my I MAC boot but shows no display and fan is loud?

    Why does my I MAC boot but shows no display and fan is loud?

    Reset the SMC a couple of times and then post back. Instructions are:
    Shut down the computer. 
    Unplug the computer's power cord and all perihperals.
    Wait fifteen seconds. 
    Attach the computer's power cord. 
    Wait five seconds, then press the power button to turn on the computer.

  • Why does my ipod 5th gen say its a camera when i try to plug it into my computer to use itunes?

    why does my ipod 5th gen say its a camera when i try to plug it into my computer and use itunes

    Because tha is how yo get photos taken by the iPod into the computer.
    If iTunes does not also see the iPod:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Windows

  • Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50). Everytime I try to sync my phone?

    Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50)". Everytime I try to sync my phone? I have another Iphone that syncs with the same itunes account and it's working fine.

    What operating system do you have on your computer?

  • TS1382 why does my ipod classic keep saying its charging and the back of it get hot

    why does my ipod classic keep saying its charging and the back of it gets hot

    The battery and/or charging circuit may be faulty. Reset the device and try again having let it cool down first.
    tt2

Maybe you are looking for

  • Itunes 10 bug with syncing playlists

    Just passing on some information here in case anyone here has encountered this. OS: Windows 7 Pro 64-bit Itunes 10.0 and 10.1 I installed itunes 10 about a month ago loaded my library and everything was fine. Since then, I've noticed songs missing fr

  • Drag-and-drop option or just iTunes

    Hi there! I'm thinking of buying an iPod but I travel a lot, meaning that usually I have to uploadmusic from my portable harddrive using a random PC in a random cyber cafe. Thus, I can't instal iTunes on evetry new machine I'll be using. Hence, is th

  • Query required to break the string

    Hi All, Can any one please help me to write a query for the following rerquirement,. I/P : NAME MIKE O/P : MIKE should display as NAME: M I K E Thanks.

  • Elements 10 Organizer Question

    When I open up Elements 10 Editor, it works fine. But when I try to open up Elements 10 Organizer, it says there is a error and wont open. Why is this happening?

  • Problem installing DBXML on Ubuntu Server

    I'm trying to to install DBXML on a new Ubuntu Server. I've downloaded the 2.3.10 kit, and untar'd it intp /usr/local/dbxml-2.3.10. The output of sh buildall.sh and the contents of config.log are below Am I missing something in the server config?? Th