Why does my project not turn out right when I export my movie?

I am creating projects for a church doing announcements via video. Once the project is created and my timeline complete, I export the project to my desktop. It often creates strange anomlies duplicating different parts of the project and replacing others. What is the issue here? Creating a Quicktime movie, 1920 X 1080P, 23.76 frames per second, H.264 Codec.

I'd first try exporting in the native exporting format ProRes 422. Personally I've never had this happen to me but I'd try that first.

Similar Messages

Why does my main hard drive fill up when I export a movie?

Hey all,
I set all scratch disks in the preferences to use an external FW800 hd. Still, when I try to export a movie, I see my main hd fill up to maximum capacity and cannot finish the export due to insufficient space. Is there any way for that not to happen?
Thanks,
Zurdyo

With only 3GB available on your boot drive, you are very close to crashing your system. I'm surprised you haven't been experiencing lots of system problems at this point.
A 10-min HD video will indeed utilize 4-5GB of temporary space, especially if you didn't bother to render the video & mixdown the audio before exporting.
In general, you should always keep at least 20% free space on your boot drive (minimum 20GB), preferably more in order to keep your system running well. And if you are working with HD video you really need to keep at least 40-50GB minimum free space on your boot drive.

Why does adobe Premiere Pro CC Crash every time I export a movie file?

Why does adobe Premiere Pro CC Crash every time I export a movie file?

Please hand type your posts directly into the browser window. Copy/Paste leaves unwanted code throughout.
span style="color: #ffffff; font-family: Arial, Helvetica, sans-serif; font-size: 12px; background-color: #000000;"

Why does my volume not work out loud?

Um I'm not sure why my volume is not working anymore. Like sometimes it works and others it doesn't. Then I plug my headphones in nd it works when it wants to. But majority of the time it doesn't work... What's up with that?!?

I solved this problem by shutting down my ipad completely with the switch button. And then held down the Home button for about 60 seconds. I switched my ipad back on and Voila! My sound was restored to normal. But I've not tried to use it with a headset and see if the problem occurs again. Best to you all!

Why does my project not end where I want it to when exported to iTunes?

I need help with this. In Logic Pro X, my song, when in the Logic window, lasts 2:08 exactly, immediately after the last track is stopped. The project itself is at 120 BPM and lasts for 64 measures. I, however, have run into a problem where the song lasts 2:15 when I export it to iTunes. This normally wouldn't be a problem for me, but I need my song to end immediately after the last track ends, at 2:08. I have the ending set to measure 65. Can anyone help me?

The Audio Tail box isn't checked, and I have my end marker set to 65 1 1 1.
Is there something I'm missing?

Why does my iphone not show in tunes when on same wireless network

why does my ipad, and my two iphones not show in itunes on the same wireless network

It could be for any number of reasons. Since you do not identify the computer OS you use, here is information for both.
Windows: http://support.apple.com/kb/TS1538
OSX: http://support.apple.com/kb/TS1591

I have a Iphone 42 and want to transfer my photos to my PC why does my computer not recognise the Iphone when I connect it to the pc?

Can any help. I want to transfer photos on my Iphone 4s to my PC, my computer will not recognise the phone when I connect via the USB port to the PC. Any Ideas would be appreciated.

Do you get any response from the computer when you plug the phone in? I'm guessing that you are going into Computer to see if you find the phone? If you go into Device Manager, do you see any errors in the USB area?
See this support document and pay particular attention to step 5 regarding drivers. http://support.apple.com/kb/TS1538

Why do I get "not connected to Internet " when I try to move within a website?

I am using Verizon hotspot to connect my laptop with internet. Never had problems until IOS 8 came out. My laptop is XP but I don't want a new computer yet! Since I downloaded 8 on my phone my laptop does not work properly! I can get on various websites, but when I try to move within the website I receive on a large screen "no internet connection" but I am still connected to the internet. When I use my computer on a free wifi service I don't have this problem. What is going on? Help Me Please!!!

'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''

HT204291 why does my air play icon disappear sometimes when i watching my movies

Why does my airPlay icon disappear sometimes when I am watching a movie?

Intermittant issues are usually a result of interference. Check istumbler.net

Why does my project not stay rendered ?

Hi, things are generally going swimmingly.
However, after rendering for smooth play of titles and fx and then closing, upon opening the project again, the render is gone and I must render again. Is this the norm? Why don't those areas stay rendered. I understand that if I change a title or transition, it will be necessary to render. It's just annoying to have to render each time I open the project.
Also, I get occasional messages that there is a major problem and Adobe has to close. Which it does.
toutmeister

John,
You are correct that the Rendering should "stick," no matter how many times you Close/Open the Project, or reboot the computer. Still, some users report issues with the Renders sticking.
For starters, the Renders are basically "proxy files," that PrE (or PrPro) uses for smoothest playback. These files are linked to in the Project file, the PREL in PrE, or the PRPROJ file, in PrPro. Sometimes, those links can be broken, and for various reasons. Usuallly, if the link is broken, the program will ask "Where is Render file _____.AVI?" though not always. In most of the cases of "missing" Render files, no dialog screen appears.
Some of the elements that can contribute to the missing Renders are:
External HDD's used for the Scratch Disks
Networked drives used for the Scratch Disks
Some totally unknown problem
The first two are usually obvious, when the question, "where are your Scratch Disk files located?" but for the third, its a mystery, and fortunately only affects a few users. If there is no issue with #'s 1, or 2, then it's a case of # 3. Do #'s 1, or 2, apply in your case?
If it's any consolation, it seems that # 3 also happens with PrPro CS4 and CS5, and even Adobe does not have a cause, or fix. From following these issues, when # 3 hits, there seems to be nothing in common, between the Projects of those, who are "bitten." Each case seems different, and many of those users only have it with a single Project. The next half-dozen will stay Rendered. So far, it's been impossible to track this down, or even identify a Project, where it is likely to happen.
Sorry that I do not have more to offer, other than to say, either Re-render, or if it's not really necessary, let it go. I have many Projects, where playback is adequate, and I do not bother to Render, while I have others, especially with a lot of Keyframed animation, where I might Render a section dozens of times, while I adjust things.
For some more background on Rendering, see this ARTICLE.
Good luck,
Hunt

Why does my iPod touch turn off right after I slide to unlock?

I have a third generation iPod touch that used to work just fine. However, it won't turn on unless charging and as soon as I slide to unlock it, the slide to power off option turns on. Despite cancelling it, it automatically turns off. It's very frustrating and I've tried restoring it, but to no avail. The problem continues.
Any suggestions as to how to get it up and functioning properly again?

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

IWeb hyperlinks not coming out right when published

Hiya,
Has anyone got any idea why hyperlinks (to other of my pages) on some of my web pages come out as a blue square with a question mark in the middle, rather than the name of the link? If you click on it, it takes you to the right page, but you can't read what the link says. It means I can navigate around the site but no one else can!
Many thanks for any replies on how to fix...
Rose

I see what you mean. When that page is viewed in the Activity window there are a number of items that are using the following URL for their location:
archive:%20artsfiles/shapeimage_1_link0.png
with the resulting error message: Unsupported URL.
Those items that are correct have the following URL:
http://web.me.com/roseskelton/iWeb/Site/Archive%3A%20artsfiles/navbar_1normal.png
Are you using a text based hyperlink for those or an image? If an image how are you adding it to iWeb?
You may have to delete those items and create them again from the beginning.

Why does the image not open in Elements when I opt for Edit in Photoshop Elements 11 from the Photos tab in Aperture?

With an image in Aperture, when I got Photos one of the options offered is "Edit in Elements Photoshop 11", but although selecting this opens Elements, there is no image and it is necessary to open the image in the normal way from within Elements. Other plugins, e.g. from Topaz work superbly from within Aperture. I am puzzled to know the reason, and in particular if there is any setting in either Aperture of Elements that need to be attended to. I would be very grateful for any suggestions.
Barry Willcock

Hi Frank, and many thanks. I can now get the picture into Elements, and work on it. However, when I have finished, I save it (giving it another name that I can recognise if the amendments are slight) it puts the file back into the same folder, but I have then to import it into the Aperture library in order to see it back in Aperture. Not a big problem, but an interesting one.
Again, many thanks
Barry

Why does Mountain Lion not save 'Save', 'Save As' and 'Export' window sizes?

Every time I go to Export or Save a document, the window size resets and I have to constantly re-size it every time. It's quite annoying. Is there a way to change these default windows sizes permanently?

Just a guess. Maybe it is not required that the FP be opened but just loaded in memory before the save. In 6.1, find a property/method that requires the FP into memory (such as Edit Mode on Open) and use it before saving the VI.
LabVIEW, C'est LabVIEW

Why does my iPod not register with iTunes when I plug it in?

My iPod has been having a continual preoblem, where it shuffles through my entire library, song by song, and stops at each one for about a second each. It has happened a few other times. I plug it into my pc to try to correct the problem, but my iPod doesn't reister with my iTunes. Does anyone know what's wrong? I'm beginning to think I have a defective iPod.

have you tried resetting it Resetting
have you read the following:
http://docs.info.apple.com/article.html?artnum=61711

Why does my project not turn out right when I export my movie?

Similar Messages

Maybe you are looking for