Why does my recording stop when I navigate away from AA3?

I noticed recently that when I navigate away from AA3, my recording stops. This is extremely inconvenient. How do I fix it?

Well, the first thing to do is go to Edit/Audio Hardware Setup and make sure the box beside "Release ASIO Driver in Background" is NOT ticked.
However, when using ASIO drivers remember that you can't have mutliple pieces of software trying to use the driver at the same time. This is a restriction of ASIO itself and not an Audition restriction.
Bob

Similar Messages

Since updating firefox it constantly crashes when i navigate away from the homepage

I have recently updatedFirefox to the latest version, but since doing this it crashes when i navigate away from the homepage

Problem solved.I removed mozillateam/stable repo from my sources list.Then removed firefox using 'apt-get remove firefox' and then installed firefox after a restart.Also removed '.mozilla' folder in my home directory which was probably the root of this problem.Now replaced my previous profile FF 10 woking great.

Why does video out stop when ipad screen locks?

Why does video out stop when ipad screen locks?

Thanks. I should have been more specific. I am watching using video out cables to the TV, and would like to watch the entire episode without unlocking the screen every five minutes.

Why does my iPhone 4 keep playing music randomly? And why does it keep stopping when I actually want to use it?

I keep trying to play music and it just randomly stops, and when I don't want to play music it randomly starts playing! Why is this? Is this because of iOS 7? or is it because of the phone itself?

Try to do a reset. Hold down on the Hold and Home keys for about 10 seconds until the  shows.
If that doesn't work, you should try to do a restore. A restore re-installs the operating system. Plug your phone in and go to the phone preferences screen in iTunes. There is a restore option. After restore iTunes gives you an option to restore from backup or use as a new phone. I would first try to see if the problem vanishes if you do the restore from backup option. If the problem still exist, you might want to restore again and opt for the use as a new phone. This is because maybe a file in the backup is corrupt and you cannot use the backup. This means all of your saved texts, photos, settings, etc will be gone. You can resync most of the data back if you have them on your computer (not your text messages though). So think twice before restoring as a new phone. Also, there is a risk that restoring won't resolve your issue so think twice. I can tell you that I have everything on my computer and I can get most of the data back even if I restore as a new phone but everyone is different.

Why does a LaunchDaemon stop when user logs out?

Hi,
We have an application that uses an older version of Jetty that I am trying to configure as a LaunchDaemon on OS X 10.7.5
I've created a org.mortbay.jetty.plist and placed this in the /Library/LaunchDaemons, set permission 644 and owner root:wheel. This can be loaded via launchctl and all is happy. I can connect to the server and browse the pages on the server. However, if I log out, the service stops responding and only starts responding when I log in again. It appears to stop jetty and then restart it when I log in.
As this is being run as the root user, I would not have expected a user logout to stop this process. From what I can see there are no per-user overrides for this.
Upgrading Jetty is not currently an option.
Any help/ideas would be appreciated.
Dave
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>org.mortbay.jetty</string>
        <key>ServiceDescription</key>
        <string>Jetty 5</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>EnvironmentVariables</key>
        <dict>
            <key>JAVA_HOME</key>
            <string>/Library/Java/Home</string>
        </dict>
        <key>WorkingDirectory</key>
        <string>/usr/local/myApp/Jetty/extra/OSX/</string>
        <key>ProgramArguments</key>
        <array>
            <string>/usr/bin/java</string>
            <string>-Djava.io.tmpdir=/tmp</string>
            <string>-Djetty.port=2000</string>
            <string>-Djetty.home=/usr/local/myApp/Jetty/</string>
            <string>-Djetty.logs=/usr/local/myApp/Jetty/logs/</string>
            <string>-d32</string>
            <string>-jar</string>
            <string>../../start.jar</string>
            <string>/usr/local/myApp/Jetty/jetty.xml</string>
        </array>
        <key>UserName</key>
        <string>root</string>
     <key>StandardErrorPath</key>
     <string>/tmp/launchd_myprogram_stderr.log</string>
     <key>StandardOutPath</key>
     <string>/tmp/launchd_myprogram_stdout.log</string>
      </dict>
</plist>

Thought I had an answer...but no.
Maybe this reference will help: Daemons and Services
Message was edited by: g_wolfman

Why does the rendering stop when exporting in Premier 2014?

I am running Premiere 2014 on Windows 7. I have a fairly simple sequence (without audio) that I'm trying to export in H264. Every time I attempt this, the progress bar stops at the same point and it never completes.
Any help is greatly appreciated!

Break it apart and try to find the spot of stall. For example, if you get 3/4 through as your progress bar indicates, in/out or work area the first half and render out, then render out the last half. Or, render out the first half, then the next quarter, then the next eigth.
Break it apart and try to find the spot in your sequence that causes your rendering to stop,

Why does my music stop when the screen dims'

Why while a song is playing on my iPod nano and the screen starts to dim the song goes off

Have no clue since you did not mention which model iPod Nano you have!
Please describe in detail all you have attempted to do in order to resolve the issue.
iPod Manuals
iPod Models
iPod nano Troubleshooting Assistant

Why does my music stop when I open the Twitter App?

Every time i open up the twitter App my music thats playing stops.

Turn your phone off then back on

Why does black turn grey when creating a pdf from InDesign CS5??

Why do blacks turn to grey when I create/export a pdf from InDesign CS5?

Unfortunately, things like this are rarely glitchy little programming errors but deep, by-design, problems with using colour management. Usually you are getting exactly what you asked for, just not what you want, and the more colour management options there are, the more likely this is.
There are many possible causes, but one of the easiest to do is and hardest to spot is applying a CMYK profile in InDesign export, and a different one through Photoshop settings. This is actually demanding that colours be converted for the worst! Since your print workflow will be different, a work-around of rich black is likely to make things worse.
So the first thing to check is whether the colours you indended made it to the PDF, indeed. Output Preview is the first tool to use (as well as inspecting plates, you can hover over points to check the colour mix).
Also, go to your PDF export under the "Output" tab which includes colour and PDF/X. Either send a screen shot, or read off all of the the settings there.

Why does the quality reduce when dragging and dropping from photoshop?

Hi there
Basically ive got a layout in keynote and when i drag layers into keynote, they appear on the keynote layout however the quality goes all crappy....is there no way of sorting this out, or is it just how it works? when doing layouts do most people save the individual layers out as png files and then import individually into keynote and align them with the original layout? i do this currently but it is slightly time consuming.
thanks alot in advance
dan

Hi there
Basically ive got a layout in keynote and when i drag layers into keynote, they appear on the keynote layout however the quality goes all crappy....is there no way of sorting this out, or is it just how it works? when doing layouts do most people save the individual layers out as png files and then import individually into keynote and align them with the original layout? i do this currently but it is slightly time consuming.
thanks alot in advance
dan

Why does Firefox 20 stop my appearance add-on from working, even if it is private browsing, so what?

Read the question.

Personas should work just fine in the normal browsing mode, where Private Browsing mode does disable Personas - ''for now''. A Bug has been filed about that issue, and it looks like it will be rectified in Firefox 23 ''(or sooner)''.

Clear Dashboard prompts when user navigates away from the dashboard

We show our users several dashboards with similar dashboard filters, for example region. When the user applies the dashboard filter on one dashboards, subsequently navigates to a second dashboard, the filter sticks. Is there a way to automatically clear the dashboard prompt?
Thanks for the support!

The below code is used for clearing the prompts values by hitting the button.
See how it helps you
To get this use Dashboard objects->Text->Check 'Contains HTML Markup' and use this content
&lt div class="XUIPromptEntry minibuttonOn"&gt&lt a href="#" onclick="return PersonalizationEditor.removeDefaultSelection(false)"&gtClear&lt/a&gt</div>
Replace &lt with < and &gt with >
If it is helpful, please mark as correct or helpful
Edited by: svee on Jun 28, 2012 6:44 AM
Edited by: svee on Jun 28, 2012 6:47 AM

Why does the history/library window auto-scroll away from the previous point in the library?

When in Firefox 23.0's history/library window when I am browsing it will auto-scroll to the top of "Today" page making it frustrating and difficult to browse. I do not seem to recall this being the case before. I disabled "auto-scroll" in options and this has not remedied the problem.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Need to stop playback of an FLVPlayback component when navigate away from page!

I have an movieclip playing as auto start on the first page of my website. The component continues to play when I navigate away from the page. How can I stop the playback of the movie if it has not completed when navigation away from the page is invoked. I have search and am unable to find such an event using an FLVPlayback component. Presently there is no code in actionscript to display here.
thanks

Hi, this is the entire code that is placed on the timeline in frame 1 of the AS line. There is now an error and the FLVPlayer component, which is also begin in frame 1. At this point there is one method that I thought should work when the vTinesDayBtn is clicked. However, is not.
The error is:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at ewddSite_fla::MainTimeline/vTines()
ArgumentError: Error #1063: Argument count mismatch on ewddSite_fla::MainTimeline/stoppedVid(). Expected 0, got 1.
The code is:
stop();
import flash.events.*;
import flash.display.*;
import fl.video.*;
import fl.video.FLVPlayback;
function stoppedVid() {
vidPlay.stop();
vTinesDayBtn.addEventListener(MouseEvent.CLICK, stoppedVid)
function vTines(evt:MouseEvent):void {
gotoAndStop(20);
vidPlay.stop();
function engagements(evt:MouseEvent):void {
gotoAndStop(25);
function weddings(evt:MouseEvent):void {
gotoAndStop(30);
function births(evt:MouseEvent):void {
gotoAndStop(35);
function birthdays(evt:MouseEvent):void {
gotoAndStop(40);
function graduations(evt:MouseEvent):void {
gotoAndStop(45);
function anniversaries(evt:MouseEvent):void {
gotoAndStop(50);
function specEvents(evt:MouseEvent):void {
gotoAndStop(55);
function memorials(evt:MouseEvent):void {
gotoAndStop(60);
//main.addEventListener(MouseEvent.MOUSE_DOWN, mainPg);
vTinesDayBtn.addEventListener(MouseEvent.MOUSE_DOWN, vTines);
engageBtn.addEventListener(MouseEvent.MOUSE_DOWN, engagements);
weddingsBtn.addEventListener(MouseEvent.MOUSE_DOWN, weddings);
birthsBtn.addEventListener(MouseEvent.MOUSE_DOWN, births);
bDaysBtn.addEventListener(MouseEvent.MOUSE_DOWN, birthdays);
graduBtn.addEventListener(MouseEvent.MOUSE_DOWN, graduations);
annivBtn.addEventListener(MouseEvent.MOUSE_DOWN, anniversaries);
spEventsBtn.addEventListener(MouseEvent.MOUSE_DOWN, specEvents);
memorialsBtn.addEventListener(MouseEvent.MOUSE_DOWN, memorials);

Audio keeps playing after I navigate away from page?

Hi
When I play media, for example a YouTube video, when I navigate away from the page the audio keeps playing. This is unique to Safari. Firefox doesn't behave in this way. Any ideas how to fix this?
Cheers.

1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button
2. Safari > Preferences > Privacy
Press the button “ Remove All Website Data”.

Why does my recording stop when I navigate away from AA3?

Similar Messages

Maybe you are looking for