Why does my screen saver say "no photos" when they are definately there?

I just downloaded the latest OS update and my screen saver no longer works. When i go into system preferences and set up the folder to use for the picture slide show--it gives me an error that there are "no photos". But I have triple-checked and the photos are in fact there. Why doesnt screen saver see them??

UPDATE: I spoke with Apple and there is NO fix. I've set up my photos in a hierarchy as follows
Pictures FolderSlide Show Pictures Folder
Sub folder jpegs
Sub folder with jpegs
sub-folder with jpegs
Everytime i have a new batch of photos worthy of the slide show--i add a new sub-folder. This worked perfectly fine with the old OS but does not work with Mountain Lion. According to the Apple support tech i spoke with, Mountain Lion does not support going into that level of sub-folder. Essentially it is seeing the "Slide Show Pictures folder" but all it sees are the next level of sub-fodlers themselves--it cant go into the next level to see the actual photos. Sounds pretty stupid if you ask me

Similar Messages

Why does iPhoto Screen Saver say "The selected source contains no pictures"?

After upgrading to Lion, I noticed that I can no longer use iPhoto albums as a screen saver. At first when loading the Screen Saver preference page, the iPhoto Screen Saver doesn't show up at all. After a bit, I can see "iPhoto" as an option, but if I select it I see a message in the preview pane that says "The selected source contains no photos. Please choose a new source that contains pictures or add images to the source." There are of course plenty of images in iPhoto already. Any ideas?
Kolbe

I have had some similar problems. I think mine were cause by "interference" from my Apple TV. By any chance do you have an Apple TV? I first notice the problem after viewing photos on my Apple TV as a screen show. When I was finished I just changed my TV back to the cable box, but did not do anything to the Apple TV. When I had the problem I went back to the Apple and switched it to something other than photos. Now my sceen saver shows photos again. I am guessing that the Apple TV some how locks the file such that the screen save can not get to it.
Good luck.

What version of iPhoto. iPhoto 11 9.4.3 (720.91) - What version of the Operating System. OSX 10.8.3 - Detail. I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are

What version of iPhoto. iPhoto 11 9.4.3 (720.91)
What version of the Operating System. OSX 10.8.3
Detail. I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are downloaded. But they are not. They can't be.
I fixed the problem somewhat myself by removing the miniSD and manually inserting it. It did not populate automatically. I had to open iPhoto and then it populated only the most recent photos I had taken which fortunately were the only ones I need. No error messages this seems to be a new occurrence.
Is there a way to just turn iPhoto off and download my photos to the folder of my own choosing?

Sure - in the iPhoto prefercences set action when a camera is ocnnected to Image Capture
LN
Note - your cute formatting really does not add anything and makes your post hard to read and follow - try straight typing with no cute formatting in the future

TS3992 Where do my photo stream pictures save on my pc, when they are automatically downloaded from icloud?

Where do my photo stream pictures save on my pc, when they are automatically downloaded from icloud?

I do not have the possibility to turn my photo stream on, that is the problem. Check the picture i attached.

Why does the IPhone 4 get really hot, when you are making a phone call??

I can't seem to find the answer to this riddle . why does the iPhone 4 get really hot when you are making phone calls or when using face Time ??

It doesn't.
There must be an issue with your iphone.
Have you tried reset? Restore?
Have you made an appointment at the genius bar to have them look at it?

Why does FCP looses its source file reference when files are copied

Why does FCP looses its source file reference when files are copied from another project??
i have this happen all the time, I move all my media to another drive and files that originated in another project do not reconnect because they have lost there source?
Any way to fix this mess? i am in the middle of reconnecting 400 files by hand one at a time!!!
Thanks, mark

Because you changed the file path. From one hard drive to another...the hard drive name is no doubt different, and then if you have the files in different folder structures then yeah, it will lose the connection to that media.
Best thing to do is to clone your media drive, or name the other drive the same name, and keep the exact same file structure (folders in folders) as the original drive. Then you won't need to reconnect.
Shane

HT204379 Why does my screen saver "zoom" in on photos from my iPhoto? Can I stop it from doing this?

I've recently moved up to Mtn Lion on a new MacBook Pro.
I finally figure out how to connect my iPhoto images with my screen saver (the way I alswyas did on previous Macs).
But the weird thing is that the Screen Saver zooms in on the photos! Sometime choosing a very uninteresting part of the photo to suddenly enlarge on my screen!
What gives with that? Can I stop it from doing this? It's like cropping my originals - many of which I have already cropped ...
Appreciate any help that you can give on this.

The only fix here is to find a third-party screen saver that supports the behavior you want. Apple has adjusted its screen saver options over the years, and the latest ones are what you see in the system preferences.
The only way to change these behaviors is to hack the screen savers. The effects descriptions and some of the behaviors have settings in this folder:
/System/Library/PrivateFrameworks/Slideshows.framework/Versions/A/Resources/Cont ent
There may be a way to modify one of those settings to prevent the zooming for the given set of screen savers (or at least one of them), but I would not recommend modifying these files arbitrarily as you might break something (or at least make sure you have a full and restorable backup you can access before doing so). There are a couple of known modifications to them that can adjust some behaviors, but image zooming isnt one I know of.

Why does my screen saver not activate in Yosemite on my iMac

I have a new iMac running the latest OS but cannot get the screen saver to activate. I have tried setting it to activate after different times, changed which screensaver to be activated, and rebooted the iMac. It works very rarely but I can't work out why it works on those times but not the vast majority of the time. Any help would be appreciated as I have looked on the forums but not found an answer that works for me

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Why does black astrisk appear on some photos when clicked ?

why does a black astrisk appear on some photos when clicked ?

Are you talking about an exclamation point? "!"
If so that is an indication that your library has damage - what version of iPhoto do you have?
LN

Why does my Vizio hdtv say no signal when I connect my minidisplay port to hdmi cord between my macbook pro and tv?

My Vizio hdtv says "No Signal" when I use my mini displayport to hdmi cord. It worked flawlessly for a month but randomly decided to no longer work.
I am using a macbook pro from early 2011 running os x Lion 10.7.5 and a thunderbolt to hdmi cord. The cord has worked without a hitch the numerous times I've used it until recently. Now plugging it in will cause the macbook to flash blue quicker than normal and immediately go back to the normal screen. I know the macbook recognizes the TV because changing the input on the TV to the hdmi connected to the computer will cause the macbook to flash blue again, with the same result. The TV remains unresponsive. I have tried all combinations of turning on and off the TV and macbook with the cord plugged in and unpugged from either and both systems and in both hdmi inputs on the TV. I've changed the display resolution to every possible option with no result. The TV is not recognized as a display on either the Display section of System Preferences or the Sound section.
It confounds me that the cord should work flawlessly until now, a month after buying it, for no apparent reason. I've been gentle with the cord, so the problem being a result of damage is unlikely. I had not updated my computer in any way between the successful and unsuccessful uses of the cord, but I have since updated my computer and the problem remains.
I have searched for this problem on the Internet and have seen others with similar problems, but I have not found a solution that resolves my problem. I hope to avoid having to make any additional purchases.
And a thousand and one thanks to any and all who help.

Do you have gfxCardStatus installed? Is your monitor set to "Integrated" or "Discrete". You want it set to Discrete to drive the external HDMI display.
Try resetting the PRAM and SMC
<About NVRAM and PRAM>
<Intel-based Macs: Resetting the System Management Controller (SMC)>
Are you sure you have a good miniDisplayPort to HDMI cable?
Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input.

How do I connect to computers that are being used in the lab, but have no address listed on the "all computers" screen and say "off line" while they are being used?

Thanks for any help I can get. I'm the new guy here at school, and did not set up the system, so I'm not familiar with any of the individual steps for correcting problems. My question is listed in the window up top.
Jim

Thanks for the response. I tried to find out what you asked. For example:
1. Computer #35 is listed on the "all computers" screen but says "access denied", "not authorized", right click for " get info" has no administrators listed, and I don't know how to add my computer as one.
2. "Scanner" screen # 35 is not listed either in "Bonjour", or "Local Network" (ethernet interface)
3. "Scanner 2" screen - same.
4. "Scanner 3" screen - same.
5. "Computer Lab" screen #35 is listed, but says "off line", "access denied"
I hope this gives us somewhere to start and go from there. Thanks.
Jim

Why can't itunes locate my music files when they are there?

I think that this happened when I checked off both "keep iTunes media folder organized" and "copy files to iTunes Media Folder when adding to library."I had all of my files located at C:\Users\Beata\Music\iTunes\iTunes Media and then I noticed that itunes made folders for all of of my music files because I have checked off the keep iTunes media folder organized. Ever since then, itunes can't find all of my files but only some of it and I don't want to go one by one to locate all of the songs. All of my songs are located in the same location which is C:\Users\Beata\Music\iTunes\iTunes Media\Music I changed it to this location because all of my song files are located there and the place where it was located before, I didn't find the song files on there. I also noticed that itunes would oragize and create folders for my songs in the my music library and I thought that was the reason why itunes couldn't find the files because they were in the wrong location so I moved all of those folders to C:\Users\Beata\Music\iTunes\iTunes Media\Music So, is it because all of my files are in folders since itunes organized them? All of my files are in album, artist, and song title folders. Where should all of these folders be located at? Also, iTunes creates multiple folders that have the same name and should I just leave the folders be or organize them myself because I have folders that have the same exact name as in the artist and title but it has different song files in the folders. Should I combine the files into the same folder that have the same artist or should I just leave it that way? Please ,I really need help as I have tried almost everything.

Help iTunes locate your media folder:
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967

HT201066 Why does "New Screen Recording" record in Photo-JPEG codec?

Something's changed on me... Now when I use QuickTime to record (using "New Screen Recording"), it records the portion of the screen I've selected same as always but the resulting file is way fat.
Get Info says its recorded as: codec Photo-JPEG.
It used to record in H.264 but now it's a bloated file and this screwy wrong format.
Why?
How do I change it back to record screen as a H.264 file?
I see only options for Quality: Medium or High. (I choose Medium.)
I'm using latest Lion and QT.
Any ideas...? Thanks

Further research answered my question. Found my answer posted by QuickTimeKirk on a related topic:
"There are two options for quality in the screen recording set up (Medium and High). Medium uses Photo-JPEG codec and High uses H.264. Medium quality actually makes much higher file sizes."
My thanks to QuickTimeKirk. Since I haven't seen any of this extremely helpful info posted here or in a Google web search, I must assume I'm the only idiot on the block. However, let's get the word out.

Why does my screen go to inverted colors when I touch certain areas of the screen?

Whenever I touch my screen in certain areas (the right hand upper corner, or the back) the screen does this wierd inverted color thing and then goes back to normal. It's freaking me out!

Thank you so much! The "help" person at AX told me to press the F11 key to "solve" the problem with the AX web site! Any idea why my AX web site didn't work on Firefox and did work on Chrome? Can companies engineer their sites so that they don't work on Firefox?

Why does my screen flash crazy red streaks when i open it up?

Lately every time i open my screen up it has red flashing and it looks like fog all across my screen, red fog and if i flip the screen open more and close it a few times it eventually goes away but the problem seems to be getting progressively worse. Any idea whats going and or suggestions?!

My Mac Unibody 2009 does this too. I am out of warranty. Any ideas on what is causing this? Any help appreciated!
Red flickering goes from a very pale to a pretty bright opacity and at first was intermittent, now all the time and especially noticeable where white or a very pale color is the predominant background color.
I would like to know if it could be repaired or if the repair cost is going to be so high that I would be better off buying a newer model.
Thanks
Helen

Why does my screen saver say "no photos" when they are definately there?

Similar Messages

Maybe you are looking for