Why does my server reject my reply to an email.

When I reply to an email it is rejected by my server. My yahoo and apple accts work fine?

check your mail settings (if the servers' ports are correct, if smtp and pop3 or imap adresses in some cases are correct) Correct configuration should be on your mail account page.

Similar Messages

On my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

on my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

It depends on the size of the attachment and the speed of your internet connection.
Next time you send an email with an attachment do these two things:
In Apple Mail (I assume you are using Apple Mail), under the Window menu select Activity. Arrange the Activity window so you can see it.
Then open the separate application located in the Utilities folder called "Activity Monitor" and arrange it so you can see it at the same time as the Activity window in Mail.
In Activity Monitor program, select the tab labeled "Network." Watch the "Data sent/sec" portion. Then send your email, while watching the Mail Activity window and also the Activity Monitor program window Data sent/sec area.
You should see the mail being sent with a progress bar in the Mail Activity window and also you should be able to see how many bytes/sec or KB/sec or MB/sec your internet connection is giving you in the Activity Monitor window.
Example: my internet provider gives me about 20 Megabits per second download and 5 Megabits per second upload. To convert these to Megabytes per second (Activity Monitor shows things in bytes, not bits), simply divide by 10 (not the exact thing to do, but close enough). So I get 0.5 Megabytes per second upload speed. When I send a file that is 5 Megabytes in size, it takes about 10 seconds if I am getting the full upload bandwidth. If I am getting less than that (which sometimes happens), it will take proportionately more time. Either way, you can see what is happening with these two windows.
If your internet provider is supposed to give you, say, 5 Megabits/sec upload (0.5 Megabytes/sec), but you see only say, 5 KB/sec (=0.005 Megabytes/sec), sent in Activity Monitor, then your emails are taking a long time because you are getting only abut 1/100 the speed you should be. You might want to check with your internet provider about that.

Why does my iphone come up with a different email when updating apps?

why does my iphone come up with a different email when updating apps?
Everytime I go to update my apps some other persons email or AppleID comes up and I have to cancel. its annoying enough to have to update all the time but now I have about100 update notifications (don't judge, you probably have a ton of apps too..haha) that are sitting idol, what's up how do I fix?
thx
Jackie
p.s. not updating to iOS6 yet

I'm sorry Allan, I should have clarified, your answer is improbable (well the first part atleast).
The apps I have had since the first week of purchase of my iphone back in 2011, I have not added any apps until 2 months before the last software update. This starting happening when the new software was implemented but I have not updated to iOS6 yet. Unless this person was able to hack into my account & transfer them to their account, I do not see how that is possible.
Prior to seeing this other AppleID, I have a popup to prompt me for my AppleID each time I download content. Each time I would see mine and enter my password.

Why does it take so long to receive an email from find my iphone

Why does it take so long to receive an email from find my iphone

Well, first off, you do not know where your iPhone is..it could be anywhere and on any network with a
ghost network to boot.. Go into your local Police Station, tell them your iPhone has been Stolen & give them All the info you have,, then claim on your house insurance.......If your "Find My iPhone" is On and you still cannot trace it...
What can I say...............

Why does my phone continue to ask for my email password

My phone asks for my email passwords all the time, I never enter the password when it ask but I still send and receive emails fine no problems so why does it ask if everything works? Gmail and yahoo on multiple accounts I have 3 yahoo and 2 gmail and they all ask Dailey

Because your mail server keeps rejecting it.

Outgoing mail server rejected password - using microsoft exchange email

hi everybody,
so i have a microsoft exchange outlook email account from my school. i recently have started having troubles with apple mail sending messages. it rejects the password of my email account. i have gone to outlook.com several times and changed the passwords but to no avail. i know it used to work. i went on a trip to guatemala and came back and now it seems to hate me. i cant remember if the problem arose after my switch to snow leopard either..
i went to the help section on the outlook page after i log in but after i change to those settings its still rejects my outgoing mail password.
is there a bug with snow leopard? oh good as i am writing this mail just 'quit unexpectedly'..aww the joys of just having microsoft email- imagine a whole operating system based on such inadequacies (i must vent.. this is extremely annoying that i have to reply back to people with my gmail account)..
thanks in advance!

It is likely the Port setting for the SMTP has either gotten changed while you were away, or your provider has changed what settings are needed. Check the settings carefully. If you know exactly what Port should be used, change to Use Custom Port, enter the Port manually, and proceed to test again.
Ernie

Why does my phone send a text message to an email address, Why does my phone send a message to an email address

Why does my phone send a text message to an email address

settings - message - send&receive - make sure your cell is the default
then starte a new converstation from - your cell number

Why does my apple I'd not verify my email address when I try to sign in to iMessage?

Why does my apple ID not verify my email address when I try to sign into iMessage

It's a commun problem with IOS 6 and it depends in which country you are trying to activate the iMessage maybe it's blocked from the goverment ...

Why does Vine Server not start with this script and work with the other?

I have the preferences of Vine Server set to start/run automatically when opening the programme.
If I double click the icon it works. Opens and starts.
If I use
activate application "Vine Server"
it opens but does not start.
If I use:
tell application "Finder"
activate
open application file "Vine Server.app" of folder "Vine Server 3" of folder "Applications" of startup disk
end tell
it opens and starts.
Anybody any idea as to why?
This seems to happen since I upgraded form 10.4 to 10.5.

Hello
Do you have multiple versions of Vine Server application, perhaps?
If so, that might cause the described behaviour.
You may try using full path to the current Vine Server application such as -
activate application "/Applications/Vine Server 3/Vine Server.app"
or -
tell application "/Applications/Vine Server 3/Vine Server.app" to activate
H

Why does RMI server sets its connection address?

I use RMI for several years now and it is really great. But what I did not understand all this time: why the server has to inject its own address to a client. I only see disadvantages of this behavior and this is a big pitfall to all newbies using RMI (two nics, different networks connecting to one server).
So my question is, what is the reason for this kind of design? Do I miss some essential security/network point?
Probably a proper callback mechanism might be one reason, but what else?
I don't need answers like it is all documented and it is easy. As I said I am used to it, but I believe it is not as easy as it sounds and it is hard to understand for a lot of people. I want to give you one example: We are developing and servicing products which are operated in closed private networks. For service and diagnostics we have to connect to these networks via VPN connections. In such cases it is hard to connect to the system applications because all the RMI servers insists on their own address/name which might be know only to the local network.
Thanks in advance for your attention
Thomas

dannyyates wrote:
The registry and the server could be on different machines, so the client would know the address of the registry in order to lookup the remote object, but the registry would have to tell the client where the server is. That is, after all, the whole point of the registry!Ok I got this,
Also, there are facilities to give the client a different address to the servers actual address. This is used in cases where, for example, the server is behind a NAT firewall. The server will only be aware of its internal address, but clients beyond the firewall will need to use the server's external address to reach it, so the objects returned from the registry will need to have the server's external address embedded in them even if the server and the registry are running on the same machine.Ok, so you have to set this to a reachable address for all clients. But in general the client already knows this since it reached the server already. So I don't see the point the server should have to change this afterward.
However I still think only the first point is not enough to have so much hassle in all other environments. Do you know a way to override the registry or possibly the client registration to ignore what the server does say to it as the "real" address?

Why does Labview Server shutdown during TestStand execution

Greetings All,
     Please forgive me if this question should've been posted on the TestStand side.
     What would cause the Labview Adapter Server to shutdown? I've noticed that each time I click the Test UUT's (green execution arrow) button that during the analysis part before the client actually brings up the serial numbers screen, the Labview Adapter Server initializes. The task bar would always show TestStand 2010 and Labview 2010 (Getting Started screen). We are running a batch sequence that is monitoring four (4) uut's during an ESS profile and performing various testing at three (3) different temperature levels. The process is kind of lengthy (2-1/2 days). From what I could see the test was in a loop, as usual, waiting for a response from the thermal chambers internal relays which tell the TestStand program that the chamber has begun to move to the next temperature. I notice that there was an ERROR displayed on the side of one of the batch sequences which was reading one of the PXI-6509 inputs. I took a screen capture at that point before doing anything further. I didn't notice it at first but looking at the screen capture again I noticed that Labview was missing from the task bar.
   I am wondering what could have caused this and if there is anything to prevent this from bitting me again. This client sequence was running well for two (2) days and this happened with less than 12 hours of testing to go. Thank you for any information that you provide with regards to this question.
Regards,
Scott

Hi snowpunter,
     Sorry I didn't get back to you sooner.
     Unfortunately there are too many users that think too much and close things before my team has a chance to look at the failure when it happens. There is a remote possibility that someone closed the Labview application by accident. There are many times that the Labview screen pops up in front of the TestStand screen while the sequence running and someone closed out Labview because they couldn't see the execution.
     It doesn't appear that there are multiple threads trying to access the PXI-6509. The contractor that did most of the programming utilized a lot of Batch Synchronizations to prevent this kind of thing from happening, not that it isn't possible.
     I'm wondering if there is a way to disable the operator from shutting down Labview, whether by the RED "X" in the top right corner or Menu-File_Close. If so, How would I accomplish this? Thanks in advance for any reply you have to offer.
Thanks,
Scott

Why does DNS server entry in ipconfig break point-to-point ethernet?

My application uses a panel pc as the user interface for a cRIO controlling a medical device. The panle pc and cRIO communicate using shared variables. During development, both devices (panel pc and cRIO) were on our company network. Curiously, when I connected them point-to-point with a crossover cable, they refused to communicate when running their LabVIEW application code. Pings from the panel pc to cRIO were successful. Much troubleshooting ensued.
Long story short, the fix was to simply delete the DNS server IP entry from both the panel pc and the cRIO ipconfig tables (see attached pic for the WinXP version of this table). If either of them had our company's DNS server IP address fillied in, my LabVIEW application would fail.
This leads me to suspect that there is something in my LabVIEW executables that wants to touch the company network. Apparently, if there is a DNS server entry in the ipconfig table, this something thinks it has a chance to "phone home" and it tries to do so. When this happens on the panel pc end of the crossover cable, the machine acts like it's locked up, but the task manager shows the CPU to be ~98% idle.
If there is no entry for a DNS server, I guess this something realizes that there is no way to "phone home", so it doesn't try and my application works great. Since the application works with no DNS server table entry, I think my crossover cable is working correctly.
Does anyone have any idea what this something might be?
Jeff
Climbing the Labview learning curve!
Sanarus Medical
Pleasanton, CA
Attachments:
IPform.gif ‏12 KB

You've hit the nail on the head Ben. For point to point communications, the IP addresses should be fixed, therefore there is no need for DNS. If a DNS is configured, the NIC (Network Interface Card) drivers will try to contact it.
In my test system, I need DNS for the test computer, but I am communicating with a dedicated Spectrum Analyzer over TCP/IP. So I added a second NIC. The main NIC is configured for DNS and all that jazz. The second NIC (plugged into PCI slot) is configured with a hard coded address, no DNS, no Gateway, nothing else. I connect that NIC to the spectrum analyzer using a crossover cable. The analyzer is configured with a hard coded address also. Now my computer can get on our company network, and the spectrum analyzer is isolated from the network, so it can't catch any viruses, etc., and it still talks to the computer. When using a configuration such as this, it is best to use a dedicated address for the 2nd NIC and spectrum analyzer in the range of 192.168.100.0 to 254
- tbob
Inventor of the WORM Global

Why does the server list in mail not contain the details of the icloud server

When I check the preferences in mail for my email accounts, the icloud smtp server called "iCloud (iCloud)" shows as a choice for the outgoing server. When I click the drop down box there it's in the list. If I then click edit server list the next dialogue box that comes up shows all the possible outgoing servers except the icloud one. Does this mean that the account for my .icloud address will not use the icloud smtp server even though on the account dialogue it shows as being selected.

It does not mean that, the Apple server will be used if you check 'Use only this Server'

Why does this server still EXIST ON MY NETWORK!

I've had these supposid servers on my network for like months now, I'm concerned people on my network can go through my computer. I turned off everything on the server app, and even deleted Mac Lion Server, and this is STILL HERE. How do I remove this from my network!
Please HELP!

Hi
Apart from what's already been suggested:
https://discussions.apple.com/thread/3190174?start=15&tstart=0
I would pay attention to Gerrit de Witt's post. There are other threads in this forum that discuss this 'problem' which you can search for yourself.
Apple's 'official' way is here:
http://support.apple.com/kb/HT4827?locale=en_US
But as threads in this forum have pointed out, it does not disable everything. I'm guessing it does work if you get the option to configure the Server at the Welcome Screen and bypass it at that point. However once you go beyond the Welcome Screen additional components are indeed downloaded which are not part of the Server app alone.
I suppose the only 'sure' way (as Gerrit mentions) is to backup and reinstall. This may involve a reformat?
HTH?
Tony

Why does WFE server take 95% of RAM in Project server 2010

Hi everyone,
I have lunched a project server 2010 in a farm with 3 servers: application server, WFE and Report server
application server: 8G RAM
WFE:8G RAM
report server:8G RAM
I have no idea why WFE take more than 95% of RAM while there are just 3 project server-related processes:
w3wp.exe = 491M
w3wp.exe=212M
owstimer.exe=330M
what should I do?

8 GB is the MINIMUM amount of memory a SharePoint server should have. That you're using 95% isn't necessarily surprising.
Is this a Hyper-V VM using dynamic memory?
Where are the search service components running? Are there any crawls in progress?
Where is SQL Server running? Another server you haven't listed?
Task Manager should list all the processes. You can sort by memory and you should see where it's going.
Alternatively you can set up a performance monitor log to determine which processes are taking the most memory.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Why does my server reject my reply to an email.

Similar Messages

Maybe you are looking for