Why does my ssh tunnel drop when I switch on a system wide proxy
The subject says pretty clearly what is puzzling me. After I establish a connection via ssh and initiate a tunnel for email access through a corporate firewall (using Apple Mail as the client and POP3 for the protocol), I find that enabling a system wide proxy (socks5, http, and https) via the same ssh tunnel causes the email to stop working. Upon switching, the http proxy (Safari) works fine -- e.g. the tunnel is healthy. This confuses me. The ssh link which hosts several tunnels is fine. I am forwarding local port 10025 and 10110 on the tunnel to a mail server behind the firewall. The socks5 proxy and http proxy are running on local ports 11080, 18080, and 18080, respectively. Why is Apple mail paying attention to the proxy settings at all? It would seem that since Apple Mail makes no attempt to connect (via the Activity window) that the link is dead, however, turning off the proxy brings the email tunnel back to normal. Wierd. Any advice? This is running on a normal 10.4 (not server), but I don't think there are any significant differences in behavior. I asked on the networking discussion, but got no response.
Two things jump into my mind: poor WiFi signal strength on the desktop PC or a dirty OS installation on the desktop PC. I'm quite sure that this has nothing to do with the cisco VPN client itself.
Assuming that you reach your remote workspace through the cisco VPN client it might also be that the remote part (the VPN concentrator) gets congested and drops your connection but than other employees would complain as well (can be checked with your ICT guys).
The thing is: when you lose Internet connection on your laptop while surfing a web site and connection comes back again within no time you won't notice anything. If the same happens to a system constantly receiving encrypted packets and some are missing the VPN client will drop the connection. Completely different protocols (http/ipsec) that are differently prone to packet drops...
Similar Messages
-
My font/text changes when I switch from Classic 3D to Ray traced 3D. Why is it doing this? Also, I cant get the font/txt to look the same after I switch from Classic to Ray traced. How can I get it to look the same?
I am pretty new to After Effects so I hope it's not my inexperience that's causing the problem. (It probably is)
I just updated to the most current version of AE.
I am on a mac pro late 2013 12GB 6 core. Running OSX 10.9.4
Okay so after looking at it a little closer, I think the color is what mostly changes. The first screenshot is the what the text look like with Classic 3D and the second screenshot is what it looks like after I change it to Ray traced 3D. Also under the "Mode" section..the pull down that says "Normal" disappears. I'm wondering why the font color is changing? -
Why does Photoshop CC keep crashing when I switch between pictures?
I just switched to Photoshop CC from CS4 and am having frequent troubles with it crashing. The problem seems to occur when I have 10-15 different pictures open and am combining them into a collage. When I switch back and forth between the windows, CC locks up and shuts down.
For product specific questions you may do better in the specific product forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right to open the drop down list and scroll -
Why does Safari go into limbo when I try to search for some things?
Why does Safari go into limbo when I try to search for some things? I start to enter something in the search window. I get a drop down with suggestion I choose one and it pops up in my search window but just turns a color and does nothing!
If I quit Safari and bring it back up, then enter the exact same line it's fine. This is just one of the many problems I've been
having with Safari since I installed Yosemite.
Has anyone got any suggestions or is anyone having the same problem. Is there a way to maybe force my MacBook pro to reinstall Safari or possibly all of Yosemite. I seem to be having a lot of problems and judging by the responses I've received (That would be None) I must be the only one having any problem at all withYosemite. Not sure what to do.
Any help or suggestions would be great
RonPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Why does my screen turn black when I play iTunes while working on iPhoto?
Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
It would be nice if I could solve this problem once and for all.
Thanks in advance for all the suggestions. I truly appreciate your help.
JanThat was easy. Thanks. Jan
Interval Since Last Panic Report: 1949305 sec
Panics Since Last Report: 1
Thu Feb 6 15:29:32 2014
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807867b470 : 0xffffff8000220792
0xffffff807867b4f0 : 0xffffff80002c4794
0xffffff807867b6a0 : 0xffffff80002da55d
0xffffff807867b6c0 : 0xffffff7f81d89ff3
0xffffff807867b800 : 0xffffff7f81d8a694
0xffffff807867b890 : 0xffffff7f81d8b4ed
0xffffff807867b8d0 : 0xffffff7f81d472a1
0xffffff807867ba40 : 0xffffff7f81d8bd6d
0xffffff807867bb00 : 0xffffff7f81d44346
0xffffff807867bb60 : 0xffffff8000655f3e
0xffffff807867bb80 : 0xffffff800065681a
0xffffff807867bbe0 : 0xffffff8000656fbb
0xffffff807867bd20 : 0xffffff80002a3f08
0xffffff807867be20 : 0xffffff8000223096
0xffffff807867be50 : 0xffffff80002148a9
0xffffff807867beb0 : 0xffffff800021bbd8
0xffffff807867bf10 : 0xffffff80002af140
0xffffff807867bfb0 : 0xffffff80002dab5e
Kernel Extensions in backtrace:
com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
BSD process name corresponding to current thread: iPhoto
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 11526391261403
last loaded kext at 23020191300: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver 13 (addr 0xffffff7f8254c000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AGPM 100.12.75
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.GeForce 7.3.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBOHCI 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6 -
Why does an unknown error occur when I try to save a document as a word file?
why does an unknown error occur when I try to save a document as a Word file?
Hi Judy,
Deleting the Preferences files seems to be missing from your list.
Quit AppleWorks,
In the Finder, go to:
username > Library > Preferences
In the Preferences folder:
Locate and Delete the File com.apple.appleworks.plist
Locate and Open the Folder AppleWorks
In the AppleWorks folder, delete the following files:
AppleWorks 6 Assistants Cache
AppleWorks 6 Preferences
AppleWorks 6 Translators Cache
Optional:
AppleWorks Button Bars
This file contains your Button Bar preferences. If you have made changes to the Button Bar, but hanve NO issues that can be traced to the Button Bar, it may be left in place.
Regards,
Barry -
put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?
i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.
-
Why does my macbook shut down when I am watching a film using airplay on apple TV?
why does my macbook shut down when I am watching a film using airplay on apple TV?
It appears to shut down and all the open programmes are closed
-
Why does this message keep appearing when Itry to instal windows 7 through bootcamp? - "Your bootable USB drive could not be created. An error occurred while copying the Windows installation files."
Found a solution!
Follow the extended version of these directions here:
https://discussions.apple.com/docs/DOC-3581
Worked like a charm! -
Why does ID create a CSS when option is not selected in export to ePub?
I am using InDesign 6 to create ePub books. I want to use my own CSS so in the Export to ePub options I am leaving the setting "Include Style definitions" unchecked. I then list my CSS under additional CSS. When I create the ePub and then examine the files included I see that there are 2 CSSs, mine and one created by InDesign. Why does InDesign create a CSS when the "Inlcude Sytle definitions" is left unchecked?
Because that is the way that CS6 exported EPUB.
EPUB is a fast moving target and has moved way beyond what CS6 can export. With each update from InDesign CS6 to InDesign CC to InDesign CC 2014, and even to the latest update to CC in October, there have been major changes to how InDesign exports EPUB. It no longer does it that way, and you have much more control over the process in InDesign CC.
Because InDesign CS6 is never going to change, it's best to work at modifying what they do export, unless you want to upgrade to InDesign CC. -
Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.
c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem. -
Why does my iPad keep freezing when watching programmes on itv player or you tube.
Why does my iPad keep freezing when watching programmes on itv player or you tube.
Try the basic troubleshooting tips and see if any of these help with the freezing issue.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If you are watching the YouTube videos on Safari - this may help as well. Go to Settings>Safari>Clear History, Cookies and Data (orCache in iOS 4.3.5). Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Why does my video suddenly freeze when playing ?
why does my video suddenly freeze when playing ?
Which app are you using to play the videos? Which version?
Are these offline or browser videos? Both?
Videos flash based? -
Why does i photo not launch when i click on icon in dock?
Help why does i photo not launch when i click on icon in dock?
The icons in the Dock are aliases. If iPhoto isn't launching from the dock the alias may be broken. What you can do is first test to if iPhoto is working by launching the app from the Applications folder. Once you have determined iPhoto is OK then remove the old Dock icon by holding it down and dragging it to the desktop, it will disappear in a puff of smoke. Then go to the Applications folder and drag the iPhoto icon to the Dock and test it.
-
Why does the iPod duplicate songs when updating my playlists?
Why does the iPod duplicate songs when updating my playlists? Also, you cannot use the "show duplicate songs" feature on the iPod - I suppose that is because it is not supposed to duplicate songs on the iPod. But, if that is the case - why does it do it?
Try resetting your iPod, press and hold the power and the home buttons together approximately 15 seconds until the Apple logo appears. If that does not work try going into Settings>General>Reset>Reset All Settings. If that does not work try connecting to you iTunes library via the cable and un-sync the library from your iPod then sync the library. For the next 2 options backup your iPod first, then do a Restore iPod from backup, if that doesn't work... As a last resort Restore your iPod as New. I too had the red circle and square after updating to 7.0.4 the last resort fixed mine, others have reported doing all the above, all have had reports of fixing the problem and not fixing it. Give it a try, hopefully one of these works, Good luck.
Maybe you are looking for
-
Editing in Photoshop Elements 9 (tiff and tif)
Last week at the end I moved to Aperture. Now I've some problem when I edit with Photoshop Elements 9. I've setted Aperture to transfer a 8 bit tiff to photoshop now Aperture tranfer a .tiff file to photoshop and when i save (not save as) photoshop s
-
I tried to set up icloud on my iphone 4 and I get this message that "the maximum number of free accounts have been activated on this iphone". My iphone was used by someone else before I got it. How do I deactivate these accounts or overcome this p
-
Two attached libraries with same package name
Hi everybody! Excuse my bad english, I have a Form (in Borms 6i) with 2 attached librairies. In these libraries, I have 2 packages and 2 procedures with the same name. How I can call the good one in specific library? Thanks so much Valerie
-
Am i able to get adobe kuler on my mac desktop?
Hi there, I was just wondering if there was a way to access adobe kuler (or color cc) as a download for my mac desktop so I don't have to be online to use it? Thanks!
-
Start java-Program when Tomcat starts
I have a TimerTask, that should be executed every hour (war in webapp of Tomcat). If Apache Tomcat will be shut down and started again, Task won't be executed. Can I define somewhere, that some class should be executed when Tomcat server starts and a