Why does my television picture distort so much when there is a flash, or an explosion?

The picture I get on my Sony Bravia 1080p television is normally gorgeous. But whenever I'm watching a movie, or television show, and there is a flash, or an explosion, the television picture is terrible. There's awful pixilation and banding all over the screen. I never see this when I'm watching a Blu Ray, so what gives? 

candcgregory wrote:
The picture I get on my Sony Bravia 1080p television is normally gorgeous. But whenever I'm watching a movie, or television show, and there is a flash, or an explosion, the television picture is terrible. There's awful pixilation and banding all over the screen. I never see this when I'm watching a Blu Ray, so what gives? 
It sounds like a TV problem to me. Since the Blu-Ray works, it could be a TV input or cable.
Try connecting your STB to a different TV input. 
Try connecting your STB with a different cable.
Reverse the STB & Blu-Ray inputs and see what happens.
If you still have a problem, try connecting that STB to another TV.
That should tell you whether or not you have a TV problem, cable problem or the STB is bad.  If it is the STB contact customer support.

Similar Messages

  • Why does Lightroom append "-2" to file names when there are no duplicates.

    I have been using Lightroom since V. 1. I have noticed that many of my file names have been renamed in LR (now V5.3)  by changing the filename from "XXX_yyyy.NEF" to "XXX_yyyy-2.NEF". IF I look in the folder where the images are stored, both versions of the file are there. I went into LR and deleted the "-2" version and re-imported the original files. In some cases this worked and the LR file now has the original name. In some other cases, LR re-named on import and appended the "-2" to the filename. I checked and it turned out there were other files with the same name on the disk and in the LR catalogue, so I understand why these files were renamed. In other cases, however, there is no other file in LR with the same name. Yet, when I try to delete the "-2" file in LR and re-import the original file (as I did earlier),  LR again renames my file by appending the "-2" suffix to the filename. It does not copy the file, it actually renames the file in the folder where it is stored. I cannot understand why the filename is being changed in this case.
    Can anyon tell me why LR is doing this and how can I prevent it?
    I am runing LR under 64-bit Win 7 with 12 GB RAM, the problem seems to have occurred primarily with Nikon D200 RAW (.NEF) files.
    TIA
    Winslow

    Winslow98 wrote:
    Can anyon tell me why LR is doing this
    Yes - it's due to a bug, or if you prefer: a "design/implementation limitation". Sorry: I'm not qualified to provide details...
    Winslow98 wrote:
    how can I prevent it?
    Somebody else may be better qualified to answer - I never figured out exactly what causes it. Two ideas I have though (take with salt / refer to initial disclaimers...):
    * Export all photos into a new catalog (it's possible it'll leave the offending / problem-causing junk behind - dunno).
    * Use SQL to hack your catalog - look for clues in "Import Hash" column of 'AgLibraryFile' table (and if you see problem - fix it...).
    * Try deleting .agprefs file (in with your presets, 'Preferences' subfolder). Not sure if this has anything to do with it - I don't think so.
    Sorry I can't be more help (and consider holding out for a better answer),
    Rob

  • Why does "Download this video" keep popping up when there isn't even a video on the page?

    I just closed 3 tabs in a row and "Download this video" was on the screen even on the fourth tab until I moved the pointer down onto the page to close it manually, it went out before I got there. Sometimes I have to chase it until I can hit the "x", then it stays off for a while.

    Sounds that you have an extension that isn't working properly.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Why does my printer say out of paper when there is a full stack?

    When I try to print from my printer it will say "Out of Paper" even though there is a full stack of paper in the printer. I tried lowering the stack to see if that would work and it didnt. How do I fix this problem?

    Please read this post then provide some details.  What printer model? (There are a number of Photosmart Premium models).  
    The troubleshooting steps here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Why does my iphone shut down my computer when i have pictures on my phone

    Why does my iphone shut down my computer when I plug into the USB port when I have pictures on my phone.  My computer says it has found a new digital camera - then my computer shuts down.

    Thank you Lawrence.  I forgot I used to run a Logitech webcam several years ago and I hadn't uninstalled program when I changed the camera to a different one.  I uninstalled the camera and it now seems to accept my phone with pictures onto my computer without shutting my computer down. I really appreciate your help with this problem.

  • Why does photoshop download pictures automatically off the internet that I don't want?

    why does photoshop download pictures automatically off the internet that I don't want?

    Where are the pictures coming from? I would more likely believe that your system has a virus than photoshop, but without more information, I could be misinterpreting your post.

  • Why does AAM Updates Notifier run so much?

    Why does AAM Updates Notifier run so much? It seems to really be working my hard drive.

    AAM updater launches automatically as you start the computer, so you can try preventing it from auto launch as per the operating system.
    Though it is not recommended much. you can check it is Re: How to deinstall AAM Update Notifier
    Moving it to download & install for resolution.
    Regards
    Rajshree

  • Why does Firefox keep hanging, crashing, sulking, dying when internet connection behaves?

    Why does Firefox keep hanging, crashing, sulking, dying when internet connection behaves? Once it renders the page it should forget about the page. Why does it behave when some link is clicked when there is no internet? It should just say internet not available or some crap. Why die, sulk, crash?? I don't get it! 3 series was much much much better!

    I should add, I've re-downloaded Firefox, but that doesn't look like it has helped any. Still get seemingly inexplicable crashes.

  • I cannot install apps that are upgraded to ios4.. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

    i cannot install apps that are upgraded to ios4. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

    I am having the exact same problem with trying to sync my iPad with my computer. To make a long story short, I had to reinstall Windows for my computer and therefore had to reinstall itunes.
    I have done back ups in the past for my ipod touch and other ipods with no problems, but unfortunately I have never been able to back up my iPad. During a sync, the iPad would always disconnect from my computer and it would never finish. it would say the connection was lost, but nothing is wrong with the connection.
    So now I have over 100 apps and thousands of pictures that I am afraid will be deleted if I run the sync in itunes. I have tried to transfer purchases and it goes through the list of apps, but nothing is ever transferred.
    Any help would be appreciated. I am not interested in jailbreaking my iPad to solve this problem. There should be a fix for this and I want to upgrade to ios 4.3 as the original poster. Please help

  • HT3887 why does my iPhone say device not supported when connecting to my make even after it has successfully paired?

    why does my iphone say device not supported when connecting to my mac pro, even though it has already succesfuly paired? I also use a wirless bluetooth keyboard and mouse on the computer successfully.
    Also when I turn Bluetooth on on the phone the devices cog never stops turning (forever serching for a device)

    iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
    It couldn't be much easier than that as you don't actually have to do anything more than normal.
    This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
    Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
    USB syncing is far faster than Bluetooth.

  • Why does my macbook pro "goes to sleep" when charging?

    Why does my macbook pro "goes to sleep" when charging? It is working fine without charging but once I attach the charger to my laptop, it just blacks out or goes to sleep mode and I can't wake it up unless I unpluck the charger.
    I read from threads that it is a logic board problem....How do I solve this problem?

    Try an SMC reset. Follow the method for "a battery you should not remove yourself."
    http://support.apple.com/kb/ht3964

  • Why does my Adobe Reader DC stop working when I click scroll down options?

    I used to use PDF Suite 2014 Standard to view pdf files.
    However, tonight a message appeared when I attempted to open files saying ..."if the document does not load then the pdf viewer may not be able to display this type of document"
    I went to the website provided to download Adobe Acrobat Reader DC.
    Although I was able to load pdf documents and fill in forms, the program repeatedly would crash whenever I attempted to click on scroll down options on forms.
    Any help is appreciated
    ....and talk/write slowly for I am not super computer literate.
    Regards,
    Luisa

     Dear Aedesh, Thank you for your assistance.  I did all that you instructed below, regarding uninstalling, and using the Adobe Reader and Acrobat Cleaner Tool.  I restarted my computer, then installed Adobe Acrobat Reader DC (for Windows 7, English and version: Reader DC 2015). I continue to have the problems: (1) When I attempt to use a scroll down option within a pdf form, the program stops working. (2) If I send the pdf to my iPhone, and I open the pdf, I receive the message "Please wait...if the message is not eventually replaced by the proper contents of the document, your pdf viewer may not be able to display this type of document..." However, when I send pdf's created earlier than 4-28-15, I am able to open in my iPhone.I am able to open on my laptop the pdf's created after 4-28-15, but have the scroll option issue  (thank you in advance for your patience)Luisa 
     Luisa Montaini-Klovdahl, Ph.D.Licensed Psychologist &
    Captain, US Army Reserves Medical Service Corps4153 Park Blvd
    Palo Alto, CA 94306
    Telephone: 650.384.6559
    Facsimile: 650.384.6547 This e-mail may contain confidential patient information. If you have received this transmission in error, please delete and contact the sender.   
         From: aadeshs76610910 <[email protected]>
    To: Luisa Montaini-Klovdahl <[email protected]>
    Sent: Thursday, April 30, 2015 9:55 AM
    Subject:  Why does my Adobe Reader DC stop working when I click scroll down options?
    Why does my Adobe Reader DC stop working when I click scroll down options?
    created by aadeshs76610910 in Acrobat Reader - View the full discussionHi Luisa,  Please follow the steps below :- 1) Uninstall Adobe Acrobat Reader DC. 2) Run the cleaning tool Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs3) Restart the computer.4) Install Adobe Acrobat Reader DC using this link Adobe Acrobat Reader DC Install for all versions Let me know if the issue persist.  Regards,Aadesh If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7499212#7499212 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7499212#7499212 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Why does that entire thread goes to sleep when we put a wait function in time critical loop?

    why does that entire thread goes to sleep when we put a wait function in time critical loop but not when it is not time critical

    Norbert B wrote:
    Ujjval,
    in a RT system, priorities have (in general) increased effect on the execution of the application.
    It is recommended that you only have a single task in your RT program at "time critical". If you have two task "time critical" (that means you are running into issues caused by your quoted "feature"), you have a flaw in your application architecture.
    Since LV 7.1, it is recommended to work with Timed Loops in order to prioritize tasks on a RT system. Timed Loops are executed on priorities between "time critical" and "above normal". Each Timed Loop will execute its content in a single thread in order to keep a good overview of the timing (like finished late [i-1]). Using those structures (and according settings) in a reasoned manner will prevent your RT system to run into priority issues.
    Ujjval Shah wrote:
    [...]also i would really appreciate if i can get more documentations regarding how LV creates threads and assigns subvis to them[...]
    You will have a real hard time to go into this very deep. This is the feature of LV: you can just use multithreading (multicores) without the needed knowledge of scheduling and load balancing. This makes LV programming in general very easy in comparison to e.g. ANSI C (in regard of multithreading). So creation of threads, distribution of tasks to the threads are abstracted and most often not visible to the programmer.
    There are some switches and levers you can "play around" in order to make LV to behave differently in this matter. But this most often requires  deep LV knowledge and cannot be explained in a simple posting.....
    hope this helps,
    Norbert 
    Amen to that!
    The question can not be fully answered without digging into the internals of the OS LV is run on because LV works with the OS and lets it do the scheduling.
    Yes that note applies to pre- LV 7 RT. When run under RT the ONE Time Critical loop was guarenteed to stay determinisitic.
    Since then the Timed Loop was introduced that allowed multiple levels of priority and later allowed us to assign which CPU the code would run on.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Why does the apple tv light come on when I'm not using it?

    Why does the Apple tv light come on when I am not using it?

    my atv1 does that sometimes
    I'm 90% sure that it's because it crashed and rebooted
    it's basicly a computer and sooner or later a computer will
    crash unless rebooted

  • In addition to my home page, every time I start Firefox a tab opens with notifacation of an updated addon. Why does this tab continue to appear even though there is no updated version of the addon?

    In addition to my home page, every time I start Firefox a tab opens with notification of an updated addon. Why does this tab continue to appear even though there is no updated version of the addon?

    See these articles for some suggestions:
    *https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    *https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    *http://kb.mozillazine.org/Preferences_not_saved

Maybe you are looking for

  • Getting 'No Data found' Error when clicking the edit link to edit a record.

    Application Express 4.2.0 Database: oracle 11g Hi Guys I am getting an error whenever i try to edit some of my entries by clicking the edit link, i have a composite Primary key attributes of three columns ( Budget Year ('YYYY'), Training Name('VARCHA

  • ITunes (10.3.1) wont upgrade on Win7 64bit

    iTunes installer completes the download and runs through the entire install and then fails. I have tried manually installing with the same result. Where I can get additional details on the failure? is there a log file I can reviewto get more details

  • Iphone 4 manufacturing defect detected after warranty runs out

    I have had my iphone 4 since launch 18 months ago and now the sleep/on off button has become stuck. The Apple store said they charge £119 for a replacement. My iphone 4 is in great condition, no marks or wear etc so this is obviously a manufacturing

  • Dynamic html header

    How can I generate dynamic html header entries in a page? Thanks, Art

  • Migration cisco concentrator to ASA

    Hi, we want to migrate from concentrator to ASA. I know that there was a cisco internal tool to adapt the concentrator configuration. Is this tool still internal or could it be downloaded somewhere? Thanks for your help.