Why does my text in Indesign start on the right side instead of the left?

I have done something to the newsletter that I am working on, but I don't know what I did.
Whenever I try to write a caption on a picture or try to type a piece of text for the newsletter, the cursor starts on the right side instead of the left and makes weird spacing and never lines up correctly.
The only way I can get text to work now is to use a snipping tool and snip text from another program!

With just the text tool selected, but no text boxes selected (or made), any change to the style of paragraphs or fonts etc is 'set' for the document. If you have clicked on the right alignment tool with nothing selected, then everything from then onwards will default to right align.
If every document you've worked on is doing this, then open InDesign with no document open (so just the panels showing, but no file/doc open) and select left align with the text tool in use. Any setting made with InDesign like this, is default for any new document created. Colours, alignment, optical kerning, fonts, sizes, leading etc etc changed in this state, is the new default.

Similar Messages

Why does Personal Hotspot in iOS 5 give a rotating circle instead on the on/off button?

Why does Personal Hotspot in iOS 5 give a rotating circle instead on the on/off button?

I went to the www.att.com and found this possible solution.
WARNING! - Upgrading iPhone 4 to IOS 5 may break Tethering.. Read for solution
[ Edited ]
Options
Mark as New
Bookmark
Subscribe
Subscribe to RSS Feed
Highlight
Print
Email to a Friend
Report Inappropriate Content
10-19-201103:46:40 PM - last edited on 10-19-201103:50:09 PM
I'm talking about the PAID FOR "Personal Hotspot" AT&T feature that comes with a 4GB dataplan. If you have a Jailbroken phone then this isn't for you.... Anyway, upgraded to IOS 5 and at the worst possible time I discovered that my phone no longer had the ability to share it's over the air data with my Laptop. Restarting the phone didn't help, turning cellular data on and off didn't help and after hitting a wall I called AT&T's tech support number as I had a strong suspicion what the problem was and that they'd be able to help. Despite explaining the problem and proposing a quick fix the agent made reference to an internal memo saying there are bugs in IOS 5 and that my lack of tether was an Apple software issue and I had to call them. Frankly in this case it's VERY MUCH an AT&T provisioning issue, and one AT&T should have their techs deal with in 30 seconds rather than waste customer's time pointing fingers. After a long and frustrating attempt to get the tech to fix the problem I ended the call by CANCELLING my tether plan and going back to the "Regular" 2GB plan. Reason being hat if it's an IOS bug then it will be weeks I'm paying for service that I'm not getting, or if I was right the problem would be fixed on my next call to AT&T. For giggles I called and spent a very miserable 40 minutes dealing with Apple's IVR and nice but dim tech who was more concerned that I didn't have Apple care than anything else. That call ended with Apple saying it's not them and I should call AT&T support... However, instead of beating my head against the wall again I called SALES and asked them to add 4GB data and teher to my phone. 5 minutes later I had working tether. Problem solved. Basically to enable tether the phone has to pass a sanity check that it hasn't been tampered with, and then to activate the feature a fil is pushed down over the air to "Bless" the iPhone. I suspect as part of the IOS upgrade something went out of whack with either the file or the anti-tamper checks. Solution was to reprovision tethering, but AT&T support wouldn't hear of it. So, if you have lost tethering after an IOS 5 upgrade and AT&T support won't help then the solution is pretty painless. A) call customer service (not tech support) and CANCEL your tethering and extended dataplan. B) Turn your phone off for 5 minutes, then wait another 30 mins or so and call SALES. Ask them to add Tethering and extended data to your account. C) Wait another 30 minutes, or if you're impatient you can try turning your phone on and off again, and you'll be back in business. The down side to the is is you pay for two data plans for this month, but get a credit for the overlap next month (ie net you don't lose out). Hoping AT&T reads this and stops wasting everyone's time by enabling 1st level support to deprovision and then reprovision tether without messing with billing. We can live in hope, but until then I hope this may help someone being bounced around in a game of "Blame Tennis". Once again AT&T = All Twisted & Tangled!

Why does ctrl+shift+t many times open a random tab instead of the latest closed tab?

That's it, sometimes (I can't precise what causes it) when I dpressctrl+shift+t, firefox instead of undoing closed tabs, open a tab with a random website I visited some time ago. Like right now, I opened a tab with google and then closed, I then pressed ctrl+alt+t and it opened facebook, wich is a site I had opened like 10 pages ago

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js to prevent Firefox from restoring a previous session.
See http://kb.mozillazine.org/Session_Restore

Why does a text banner pop up while in a text converstaion? only the sound alerted before iOS 6.

why does a text banner pop up while in a text converstaion? only the sound alerted before iOS 6.

but that only started with iOS 6. prior, the text tone would sound when you were in a different conversation. I like the banner but it's annoying when I'm already in the text screen.... understand the question?

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

See also https://forums.adobe.com/thread/1654402

Trying to load my Photoshop CS3 onto new Mac Book Air. Why does it ask for InDesign CS4 part way through?

Loading my Photoshop CS3 onto new Mac Book Air. Why does it ask for InDesign CS4 part way through? I have a CS5.5 disc. Will suffice?

that doesn't make sense. you will only be prompted for earlier adobe versions when installing a latter upgrade version.
double check your versions.
also, you might want to clean your computer before retrying to install, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Why does Adobe Download assistant cannot start downloading?

why does Adobe Download assistant cannot start downloading?

That is likely due to your software firewall not allowing access. Do you receive any specific error messages? Which operating system are you using?

Why does window media player auto starts in firefox browser

why does window media play auto starts in firefox browser
== This happened ==
Every time Firefox opened
== I put a code in for a radio station on the net i listen to on my site

Your More system details list show the WMP plugin (np-mswmp), so that should be working.
See:
* http://kb.mozillazine.org/Testing_plugins
* http://www.vdat.com/techsupport/windowstest.asp

Why does my text look jagged in Fireworks CS4?

I have had it up to here with fireworks CS4. I can't figure out why my text looks like my dog chewed on it. If Fireworks CS4 has the same text engine as Illustrator than why does my Text in Illustrator look crisp but my text in fireworks looks jagged. I tried using anti-lising but that didn't help. I know there's been a lot of text issues with Fireworks CS4 but I thought the bugs were all fixed by now. Check out the attatchments to see what I'm talking about.

I posted a similar discussion a few months ago and while many were very helpful with their suggestions I have all but given up with using text in Fireworks.
It just isn't worth the bother when other applications can do text with no fuss and no messing with sizes and resolutions. I tend to use illustrator or dare I say it, Paintshop Pro which produces text easily and clearly within a text box or over an image
I'm keeping an eye on your discussion to see if there are any new words of wisdom. Here's hoping.
Sorry I can't offer any advice

Why does my text DARKEN after I RASTERIZE it?

If anybody could answer this question for me, that would
be awesome!!!!!!!!!!!!!!
Why does my text darken after I click outside the text marching-ants box? And then why does it get even darker once I rasterize the text layer?
this is puzzling me and I'm sure the answer is obvious..
I've ATTACHED a picture of my issue..
THANKS for any help!
Dan

Ah, ok that makes sense!
Thanks for the quick response!
I've noticed if I export it as a JPEG and then minimize the JPEG, it darkens as well..
Ok, one more quick question if you don't mind..
How come even though I set my canvas size at 15" x 13"...
when I zoom to 100% it's waaay too big to even fit on my screen,
appearing maybe 3' x 4' ...?
I'm confused about what canvas sizes I should be using
in designing a standard webpage background or an image for a Youtube video..
...and on that note, is there a way to shrink the canvas while having all your layers
proportionately adjust their contents to the new canvas size?
Thanks for any info!
Dan

What, exactly, are 'encoded assets'? Why does removing them resolve problems? How can they be avoided in the first place?

What, exactly, are 'encoded assets'? Why does removing them resolve problems? How can they be avoided in the first place?

As I understand it, encoding fomats your digital video clips and photos (assets) into Standard DVD mp2 format so that it can be burned to a DVD. If there has been an error in the encoding process, then you remove the old encoded assets and start over. There are numberous reasons why there can be errors in the encoding process.

TS1702 In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
Have you tried quitting Pages completely and the restart the iPad?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Why are some text missing from the right side of a page I send to my printer? Thanks

Why is some of the text missing on the right side of a page I send to my printer?

I came across something similar recently where it printed the left hand side only!
If I want to print an email, instead of File > Print ( does not print properly ) I click on the print icon on my email webpage ( do not use applemail and access gmail direct) which then takes me to print preview showing the complete email which prints ok.
Some webpages ( File>Print) do not print properly and some do. Those that do not generally have their own printer icon (path) that needs to be clicked on.
Maybe something to do with encryption but don't know.
Hope this helps in some way.

Why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.

why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening?
Any help would be very appreciated.

It looks that way..
"When LabVIEW starts it contacts the service
locator to removes all services for itself. This request is triggering
the firewall.This is done in case there were services that were not
unregistered the last time LabVIEW executed- for example from VIs that
didn't clean up after themselves"
This is not yet fixed in LV2009.
Message Edited by Ray.R on 11-04-2009 12:25 PM

Why does my text in Indesign start on the right side instead of the left?

Similar Messages

Maybe you are looking for