Why does my time/date reset everytime my battery dies?

I have a Macbook Pro and everytime the battery dies, the time and date reset to a random date. Anybody have any clue why?

It's a no go. I have even tried doing a hardware test, and I can't even to get that to start.
I need to go to a apple store. Report back later. Thanks for trying to help.

Similar Messages

  • Why does my mini ipad reset when I click the camera icon?

    Why does my mini ipad reset when I click the camera icon?

    Try doing a manual reset:
    Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
    If that does not work, restore your iPad: http://support.apple.com/kb/HT1414.

  • Why does Face Time keep disconnecting during calls. Screen freezes up., why does Face Time keep disconnecting during calls. Screen freezes up.

    Why does Face Time keep disconnecting during calls?  The screen freezes after just a few seconds on Face Time and disconnects.

    Close All Open Apps...  Perform a Reset... Try again...
    Reset  (No Data will be Lost)
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also... See Here  >  Troubleshooting FaceTime
    Mac  http://support.apple.com/kb/TS4185

  • Time/date resetting after shutting down.

    I have a 12" 867MHz PowerBook G4 that seems to give me the Time/Date reset error message. The display gives me a December 31st, 1969 date and after a few minutes, it reverts back to the proper time. Any ideas?

    Normally, this would be an issue with the internal PRAM backup battery, but 12-inch PowerBooks don't have one.
    Have you tried to reset your PMU? This article describes how to do it: http://docs.info.apple.com/article.html?artnum=14449.
    If that doesn't help, others in this forum have linked your issue to a dying battery. Have you noticed any decline in your battery life?

  • Why does firefox time out so often? slows down my working

    Why does firefox time out so often. I can be in the middle of something and it just stops. did it as I am trying to write this note. very frustrating! It either times out or freezes. the former happens more often. I can be on the web or on yahoo mail.

    The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
    Try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a setting like 30 as used in Firefox 3 versions.
    *https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
    See also:
    * http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
    * Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Why does every time I try to download a app it's says my credit card security code is invalid but it's the right one?

    Why does every time I try to download a app it's says my credit card security code is invalid but it's the right one?

    Apple I.D. support:
    http://www.apple.com/support/appleid/
    FAQ about Apple I.D.
    http://support.apple.com/kb/he37

  • I 've had the newest iPad for about one week. Just started using face time..why does face time camera take pixelated pictures? The iSight  camera pictures look fine.

    I 've had the newest iPad for about one week. Just started using face time..why does face time camera take pixelated pictures? The iSight  camera pictures look fine.

    Kathleenfromks wrote: ...why does face time camera take pixelated pictures? ...
    Because something is wrong.
    You will need to troubleshoot to find out what needs to be fixed.
    One of these suggestions may resolve your trouble. 
    FaceTime (and other video) quality problems can be caused by problems at either end of the connection.  Unless your video callers' FaceTime connections work properly with everyone else but you, both parities to the video call should consider these possibilities.
    (1) Restart your iPad and test again. Sometimes a simple restart fixes things. 
    (2) Use a fast broadband internet connection for best possible FaceTime video.
    Broadband speed matters at BOTH ends, so you use something like http://speedtest.net/ to test both ends of your video connections.
    Speeds less than 300 Kbps (up and down) at both ends are unlikely to give best results.
    (3) Try from a different wi-fi connection.
    If the problem is ONLY at your current location, restarting your internet connection may help.  Shut down your iPad or turn Airplane Mode "on".  Then check your cable connections, restart your modem and wireless access point, reconnect iPad to the wi-fi, and test again.
    If the problem remains but ONLY at your current location, there may be a problem with your internet service.  Contact your ISP for help.
    (4) Always use as much light as possible for best images (including video) from your iPad. 
    Message was edited by: EZ Jim
    iPad2 iOS 5.1    

  • Why does a movie keep rotating everytime that I attempt to view the movie?

    Why does a movie keep rotating everytime that I turn it to view the movie as shot?

    Maybe:
    https://discussions.apple.com/message/23482925#23482925
    make sure you read through all of the relies since the last one seems to apply in your case.

  • Why does my iphone 3gs shut down when battery gets to 80%?  have installed new battery and nothing changes?

    Why does my iphone 3gs shut down when battery shows 80%.  a couple of months ago is shut down at 60% but has continually gotten worse.  this was before 5.0.  i took it to a repair man and he tried a used battery, a new battery, and the original battery.  nothing helped.  5.01 didnt help either.  What is my problem?

    Fully discharge the battery (till it shuts down and won't turn on) and then fully recharge it (100%).  This will recalibrate the battery meter.  You may need to do this a few times.

  • Why does the iPod 5 not have a battery perecentage option? can't you guys put it in an update?

    why does the iPod 5 not have a battery perecentage option? can't you guys put it in an update?

    Apple has not said why.
    You can add it by:
    https://www.youtube.com/watch?v=8laNV5pjYao
    Note that % battery on an iPod is not accurate.You will see large fluctuations in % battery with load changes.

  • Why does my iphone 4s run out of battery so quick?

    Why does my iphone 4s run out of battery so quick?

    What do you mean by 'quick'? If you mean a few hours then I think it is normal (it's normal for me: 4+ hours for me depending on what I use it for). If you play apps with really good graphics it will make the battery go quicker. If you don't use it for much, then the battery might have gone out-of-sync with the battery percentage it thinks it has (I am not sure if this happens with apple devices though)

  • Why does my Time Capsule want to do COMPLETE backups every time?

    I'm still new to this Time Capsule, only had it about a week, and i'm still trying to figure it out. I have an old LaCie Hd that i was using for my Time Machine backups before, with 2 partitions, for 2 different computers both running different OS's....1 Snow Leopard, and 1 Lion.
    Now i just got this Time Capsule, and i am under the impression that i don't need to partition anything? I can't anyway, as it is a .sparseimage file. But i should be able to back up all my macs to the same Time Capsule HD. But why is it when i want to back up my Snow Leopard OS and/or Lion OS - that it wants to do a complete backup of all 400+ GB of stuff? I don't change any settings, i just let it do its thing, but when i look at it in the Time Machine/System Preferences it is gathering everything up and taking forever.
    Why does it want to keep backing up my entie computer and not just what's new after the first initial backup? Thanks

    tool wrote:
    Now i just got this Time Capsule, and i am under the impression that i don't need to partition anything? I can't anyway, as it is a .sparseimage file. But i should be able to back up all my macs to the same Time Capsule HD.
    Correct.  Time Machine will make a separate sparse bundle for each Mac.
    Why does it want to keep backing up my entie computer and not just what's new after the first initial backup? 
    The first backup of each Mac to the Time Capsule will be a full one (not just the changes since the last backup to the LaCie).  And that's pretty slow over WIFI, so it's a good idea to do the first one via Ethernet.
    Are you saying that both Macs' initial, full backups to the Time Capsule were completed, but subsequent ones are full backups again?  If so, see #D7 in Time Machine - Troubleshooting.

  • Time/Date reset after plugged in to computer

    Hi,
    For the past few days, my IPod Touch (2nd Gen) has re-set the time/date settings any time I have plugged it into either my laptop or desktop to charge. It resets to January 23, 2002, and loses about six hours in the 'time'.
    I googled for a solution and someone suggested a workaround was to make sure ITunes was shut down before plugging it in, but I tried that and it didn't fix the issue. The time and date are correct on both computers.
    I've had it for well over a year and this is a new problem.
    Any suggestions?

    What should I change it to? I guess I may not be understanding what you are saying.
    I've plugged it into two different computers, both of which are set to the correct date and time, and both of them cause it to revert back to January 30, 2002 and take the 'time' back several hours. It's 8:47 AM here right now, and the Touch has reset to 11:49 PM after having been plugged in.
    When I re-set it, I get pop-up notifications for every event I've stored in my calendar since the day I got my Touch in '09.
    I did just locate my wall charger and tried it there. That doesn't mess with the time/date, so I'll just use that to charge it if there is no work-around... but I'd love to know what I could do to fix it.

  • Why does the time transport display start at 1 hour in LPX

    Hi, I'm new to Logic Pro X and I am really confused about something. In the transport (or control bar, whatever) display, with it set at TIME, why does it keep defaulting to 01:00:00.000 instead of all zeros? I am recording voice, and as I hit the one hour mark of recording, it actually indicates two hours. Why and how can I fix this? Thanks, Al

    Blueberry, thanks for the reply, however, it just doesn't make sense. In Garageband, the beginning of the audio track is 0. When I've recorded an hours worth of audio, Garageband will show 01:00:00.000. But in LPX, that isn't true. At one hour, it will show 02:00:00.000. It seems illogical to me. 

  • Why does the Time Capsule of my neighbour appears and not mine?

    Why does the The Time Capsule of my neighbour appears and not mine?  I tried everything.
    Can I use the Capsule as merely a back up without making use of Wifi?  By connecting by cable to the computer?

    Why does the The Time Capsule of my neighbour appears and not mine?  I tried everything.
    What generation is your neighbour's and what generation is yours??
    Sometimes the changes in the TC and firmware can make wireless fail.. also location is important.. the location of your neighbours might be better than yours.. his also might interfere with yours.. set a fixed channel and try the various channels.
    Can I use the Capsule as merely a back up without making use of Wifi?  By connecting by cable to the computer?
    Sure, but you need to work out how the network is going to work.. if you are still picking up network from wireless.. then set static ip for the TC in a different IP range.. set no gateway (router ip) or dns and it will work just fine.

Maybe you are looking for