Why does my ? turn into a french e with an accent?

I am using a mac book pro, logged into my work email Microsoft Outlook, trying to answer an email and my ? keeps turning into a capital french E with an accent. How do I fix this?

fehmida wrote:
my ? keeps turning into a capital french E with an accent. How do I fix this?
Normally that means you are using a French Canadian keyboard layout. Go to system prefs/language & text/input sources and make sure that only the box for US is checked.

Similar Messages

Why does Safari go into limbo when I try to search for some things?

     Why does Safari go into limbo when I try to search for some things? I start to enter something in the search window. I get a drop down with suggestion I choose one and it pops up in my search window but just turns a color and does nothing!
    If I quit Safari and bring it back up, then enter the exact same line it's fine. This is just one of the many problems I've been
having with Safari since I installed Yosemite.
     Has anyone got any suggestions or is anyone having the same problem. Is there a way to maybe force my MacBook pro to reinstall Safari or possibly all of Yosemite. I seem to be having a lot of problems and judging by the responses I've received (That would be None) I must be the only one having any problem at all withYosemite. Not sure what to do.
     Any help or suggestions would be great
     Ron

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Server in sap management cosnole does not turn into green

I installed this trial version from http://www.sdn.sap.com. with the download, there is a tutorial explaining all steps for installation. In SAP Management Console when I click on NSP "Start" it should change to green but in my case it stays yellow.
I do not have an access key to the server. When I try to log on to this server it asks me for user and a password so I tried to use nspadm with it's password but it did not accept.
as far as i know that in order to let the server turns to green all I need to do is to right click on it and choose starts but even after doing this it does not turns into green.
I want to create another user in order to user it instead of SAP*
The role that I am giving to this user is u201Csystem administratoru201D but after I save it I get this message on screen: u201CNo update server found for Eu201D
despite of this previous message it creates it. I get this if I create a new user with the previous name I wanted to create previously.
In general I need a way to let me create my own users so I can start developing in ABAP.
I can access every thing in this workbench but if I want to do some changes on classes and packages I create it tells me that I can not using SAP* and if I want to create other users sing SU01 and then logon again using using these new users I get a problem in accessing the system using them.
I need to know what is reason for not turning the server in sap management console into green and i why i can not create users.
Thanks
Amal

Dear Vincent;
this is what i got from "Developer Trace" for "disp+work.EXE"
trc file: "dev_disp", trc level: 1, release: "720"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 70
intno 20020600
make multithreaded, Unicode, optimized
profile
amal-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_amal-PC
pid 976
Mon Oct 10 17:01:10 2011
kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)
length of sys_adm_ext is 588 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 976) [dpxxdisp.c 1268]
shared lib "dw_xml.dll" version 70 successfully loaded
shared lib "dw_xtc.dll" version 70 successfully loaded
shared lib "dw_stl.dll" version 70 successfully loaded
shared lib "dw_gui.dll" version 70 successfully loaded
shared lib "dw_mdm.dll" version 70 successfully loaded
shared lib "dw_rndrt.dll" version 70 successfully loaded
shared lib "dw_abp.dll" version 70 successfully loaded
shared lib "dw_sym.dll" version 70 successfully loaded
shared lib "dw_aci.dll" version 70 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Mon Oct 10 17:01:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >amal-PC_NSP_00 <
DpShMCreate: sizeof(wp_adm) 20000 (2000)
DpShMCreate: sizeof(tm_adm) 4323912 (21512)
DpShMCreate: sizeof(wp_ca_adm) 32000 (64)
DpShMCreate: sizeof(appc_ca_adm) 32000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064
DpShMCreate: sizeof(comm_adm) 556064 (1104)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (1792)
DpShMCreate: sizeof(wall_adm) (40056/34360/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3920
DpShMCreate: SHM_DP_ADM_KEY (addr: 09620040, size: 5055296)
DpShMCreate: allocated sys_adm at 09620048
DpShMCreate: allocated wp_adm_list at 09622F28
DpShMCreate: allocated wp_adm at 09623020
DpShMCreate: allocated tm_adm_list at 09627E48
DpShMCreate: allocated tm_adm at 09627E70
DpShMCreate: allocated wp_ca_adm at 09A478C0
DpShMCreate: allocated appc_ca_adm at 09A4F5C8
DpShMCreate: allocated comm_adm at 09A572D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 09ADEEF8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 09ADEF50
DpShMCreate: allocated j2ee_adm at 09ADEF88
DpShMCreate: allocated ca_info at 09ADFEE0
DpShMCreate: allocated wall_adm at 09ADFEF8
DpCommAttachTable: attached comm table (header=09A572D0/ft=09A572D8)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Mon Oct 10 17:01:16 2011
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=159 reserved=47 quota=10%
Mon Oct 10 17:01:17 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1654]
Mon Oct 10 17:01:22 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1755]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpAppcBlksLow: max appc blocks in queue is 250 (50 %)
DpWpBlksLow: max wp blocks in queue is 400 (80 %)
Mon Oct 10 17:02:07 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Mon Oct 10 17:02:27 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
this process "disp+work.EXE" is still yellow

Why does messages go into Recovery Callback Queue - urgent

Env : BPEL 10.1.3.4 , Web logic 9.2
Scenario:
We have a process(Lets say A) putting messages from into a MQ(lets say Q1).
Another Application processes the messages from Q1 and puts some messages into another Queue (Q2).
We have another process B (Lets say B) which reads from this Q2 and calls the Process A’s callback operation(using right correlation parameters) thus releasing “receive” acitivty of Process A and hence flow goes further.
Problem :
While the above scenario is working as expected for some cases(approx. 60%) we observed the following :
i)     A’s receive activity is still waiting to receive a callback from B.
ii)     All the instances where A is waiting for receive has gone to “Recovery Callback” and sits there. When we manually recover them , Process A’s receive gets executed and works as expected.
iii)     In some cases where the flow went successfully ( ie., receive receives the callback) , receive activity received the callback long time after the message is places in Q2. ( in some cases it is 9 to 10 hrs).
Questions:
i)     Why does instances go into “recover callback” ? What can we do to avoid this ? ( Kindly dont suggest ways to recover, I am looking for a preventive measure)
ii)     Process A's recieve activity sometimes receive the callback after some 9 hrs and the flow passes on. I am wondering how can this happen as "synchMaxTime" is set to 900 secs in our case ( 15 mins). I thought any instance waiting for more than 15 mins for callback should have got timedout. Is this setting only for synch calls ?
Few other things
1. The Process B listening to Q2 is having a delay between messages as 3.66 secs . This is to throttle messages coming so quick to bpel as it may not have sufficent threads to process all of them at a time.
2. synchMaxTime in the Domains = 900 s
3. JTA Timeout in weblogic server is 3000 seconds.
This is very urgent , Kindly help with any input / suggestion you have ASAP. Thanks.
Regards,
Sridhar.
Edited by: Sridhar-SOA on Jul 27, 2011 2:38 AM

Any Updates ?

When I try to send a photo, why does it go into my outbox?

When I try to send a photo, why does it go into my outbox?

assuming you mean send a photo by email.
a photo can be quite large and contain a lot of data. depending on your connection it can sometimes take a while to send. As long as a red exclamation doesn't appear it will send. the outbox indicates mail going out, hence outbox.

Why does my itouch,after i restored it with itunes, it turned of and kept turning on to the apple and it still doing that?

why does my itouch,after i restored it with itunes, it turned of and kept turning on to the apple and it still doing that?

Sounds like a hardware issue. Have it serviced if it's in warranty.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

On ipod touch why does imessage go into my email?

on ipot touch why does imessage go into my email instead of imessage?

- Try inserting and removing the headphone plug a dozen or so times.
- Next try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that indicates a hardware problem, like a bad headphone jack.

HT201317 Why does photostream turn off on my pc when exiting the cloud control panel?

Why does Photostream turn off on my Windows PC when I exit the iCloud control panel?

The iPhoto app on your iPad is not the cause of this problem.
Try uninstalling the iCloud application from your computer. Then reinstall it following the links provided at http://www.apple.com/ca/icloud/setup/pc.html

Why does computer turn off when battery 40%?

Why does computer turn off when battery around 40%? I have tried replacing the battery.

Replacing as in "removed, re-installed", or "bought a new one"?
This is my display from "Apple menu > About This Mac > More Info > Power"
"Normal" means no issues.
I will stop now in case you have actually put in a *new* battery ...

Why does javadoc goes into an infinite loop

at my dos prompt , in the same directory as my Page.java file, i type javadoc Page.java
why does it go into an infinite loop? instead of producing any documentation
it just says for example
javadoc Page.java
javadoc Page.java
javadoc Page.java
javadoc Page.java
javadoc Page.java
javadoc Page.java
javadoc Page.java
javadoc Page.java
javadoc Page.java
javadoc Page.java
javadoc Page.java
Stephen

this is a sample page -- i'm using jdk 1.4 trying to run javadoc Tracer.class or javadoc Tracer.java or javadoc Tracer gives throws the console into an infinite loop with the statement being printed over and over again. But i haven't just noticed this problem with javadoc -- i noticed this problem with certain types of mistakes in the code rather than just displaying the compiler error -- it creates this infinite loop in the dos console window. any thoughts ?
here is my version.
java version "1.4.0"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0-b92)
Java HotSpot(TM) Client VM (build 1.4.0-b92, mixed mode)
* Tracer.class logs items according to the following criteria:
* 2 = goes to text file Crawler_log.txt
* 1 = goes to console window because it is higher priority.
* @author Stephen
* @version 1.0
* @since June 2002
import java.io.*;
import java.net.*;
import java.util.*;
import java.text.*;
class Tracer{
     public static void log(int traceLevel, String message, Object value)
          pout.write(getLogFileDate(new Date()) +" >" + message + " value = " + value.toString());
     public static void log(int traceLevel, String message )
          pout.write("HI HOW ARE YOU " ) ;
          pout.flush();
     //public static accessor method
     public static Tracer getTracerInstance()
          return tracerInstance;
     private static String getLogFileDate(Date d )
          String s = df.format(d);
          String s1= s.replace(',','-');
          String s2= s1.replace(' ','-');
          String s3= s2.replace(':','.');
          System.out.println("getLogFileDate() = " + s3 ) ;
          return s3;
     //private instance
     private Tracer(){
          System.out.println("Tracer constructor works");
          df = DateFormat.getDateTimeInstance(DateFormat.MEDIUM, DateFormat.MEDIUM);
          date                    = new java.util.Date();
          try{
          pout = new PrintWriter(new BufferedWriter(new FileWriter("Crawler_log"+getLogFileDate(new Date())+".txt", true)));
          pout.write("**************** New Log File Created "+ getLogFileDate(new Date()) +"****************");
          pout.flush();
          }catch (IOException e){
          System.out.println("**********THERE WAS A CRITICAL ERROR GETTING TRACER SINGLETON INITIALIZED. APPLICATION WILL STOP EXECUTION. ******* ");
     public static void main(String[] argz){
     System.out.println("main method starts ");
     Tracer tt = Tracer.getTracerInstance();
     System.out.println("main method successfully gets Tracer instance tt. "+ tt.toString());
     //the next method is where it fails - on pout.write() of log method. Why ?
     tt.log(1, "HIGH PRIORITY");
     System.out.println("main method ends ");
     //private static reference
     private static Tracer tracerInstance = new Tracer();
     private static Date date     = null;
     private static PrintWriter pout = null;
     public static DateFormat df = null;
}

Why does my music have a red circle with a square dot beside it and how do i remove it

why does my music have a red circle with a square dot beside it

Here's what I had to do, no thanks to the others on here who go at it like Apple, delete and restore.
No, you don't have to delete and restore. Just open a folder on your computer, call it something like iPad music, keep it open, open iTunes, select all your music, copy and paste it in the folder you just created, delete all your music from iTunes (relax, you just copied it into that folder). Select all the music in that folder, drop it back onto your playlist. Now, I renamed my playlist, because it was called untitled, originally, so if that doesn't work, rename, or delete and recreate your playlist, copy the music back over, sync, and they will play.
Worked for me, anyhow. Good luck!
<Edited by Host>

HT1926 Why does Itunes installed on a Toshiba Satelite with windows 8 not recognize my Ipone or Ipad?

Why does Itunes installed on a Toshiba Satelite with windows 8 not recognize my Iphone or Ipad?

It's possible that charger damaged some part of the connection on the iPad. There's little metal contacts on that small silicon chip sticking out of the port and if something happens to one of those little contacts it can effect how it works.
You can try taking it into an apple store and have them look at it. If you'd only used 'official' stuff there'd probably be no question but once they know that the damage, potential damage, was caused by a third party device, then it may be up to the discretion of the manager what they do with it. Whether they replace it under warranty or decide that the warranty is void (I honestly don't know how strict they can be with the use of third party devices and how they may/may not work)

When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm work

When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm working on these files? On top of this, my red arrows get moved around also.

Hi ,
Could you please update me with few details like what version of Acrobat are you using?
What OS do you work on ?
Do you experience this any particular PDF or happens with all of them?
Did you try the same with turning on the OCR ?Please check the same and compare the outputs .Does that help you in anyway ?
If the file is not confidential ,could you please share the file with us so that we can analyse it our end and revert you with the appropriate answer .
Please share the file on [email protected] and please cc [email protected] as well .
Regards
Sukrit Dhingra

How come the sight was down so long? and why does the system not send emails anymore with responses?

how come the sight was down so long? and why does the system not send emails anymore with responses?

The system is back up and fully functional. How long has it been since you stopped receiving notifications? Can you share your form with us so we can have a look into what might be going wrong?
Andrew

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Why does my ? turn into a french e with an accent?

Similar Messages

Maybe you are looking for