Why does my tv only show black and white

I see only black and white on my tv from my apple tv

Thank you,
I have set the unit to factory restore and the tv resolution to 480i.  I have done a reboot. The tv is an old tube tv, and is set to factory resolution and cannot be changed, there is no settings to change the resolution/settings.  The tv color is fine during the cable settings.
Thanks
vince

Similar Messages

  • Why does 3522 prints only in black and white not in color

    my 3522 hp printer will print only in black not in color.i have new color carttridges #564 and the black is not low.any help would be appreciated.

    The troubleshooting steps in the document here may help resolve color not printing on your Deskjet 3522.   If this does not resolve the issues please provide some further details - what is the operating system on your computer?  Does the printer make color copies properly?

  • Why does my photoshop keep giving black and white lines when I use my lasso tool?

    why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
    Can ANYONE help me?

    I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.

  • Dvr620ku only shows black and white using HDMI cable

    I connected the av cables and they showed black and white, now im connected through hdmi and same problem watching vcr tapes... what can I do besides trying a component cable?

    I would recommend trying composite (not component) video. There is one jack, color coded yellow, at the bottom right when looking at the back of the unit. Run that into your TV. Your TV likely has a combination component/composite video input. If so, you'd connect the output from the DVR620 into the Y input on the TV and connect nothing into Pb and Pr. If you're uncertain, post back with the model number of your TV so I can check its manual online. I'm not sure why HDMI would give you black and white unless the tracking and picture quality is poor with the VHS tape. I have tested this scenario multiple times with my DVR620 and always get color. Presumably you get color when playing back DVDs? If you have L1 or L2 connected to a cable box, I recommend you record a brief segment off of a TV channel onto VHS, and then test playing that back to see if that is in color or black and white.

  • Why Does My DVD play in Black and White and Not Color??

    Hello,
    I made a DVD of some video clips that I shot in color. The DVD plays fine on my computer (it plays in color), and it plays on the TV except it shows up as black and white. Other DVD's play just fine in color on the TV. What is the problem? Thanks!!!

    The only two reasons I can think of that something would play in black and white are:
    (a) you are using an S-video connection and there's a problem with a connector or cable. If the connection is loose or broken, you can see an image but it will be black and white.
    (b) viewing a PAL disc on a NTSC TV... I've not tried it but I thought that you can sometimes see the image but that it is black and white. There would be other problems with the image too, though, not just a lack of color.
    What make and model of player are you using? What kind of TV? Are you using composite or s-video or component connection? Are you using DVD-Rs or something else (-RW, +R, +RW, dual layer)?
    Seriously, I can think of no reason why it would display in color on your computer, but not on your TV.

  • Why is my camera only taking black and white photos?

    Suddenly my camera is only taking balck and white. Anyone know how to fix this?

    It could be that you have a filter set on the camera. Open the Camera app, tap the filter icon at the lower right, then tap None in the middle. More details: http://support.apple.com/kb/TI115

  • Why does my ipod only show an apple and wont start up

    Why does my Ipod only show an apple and wont do anything else>  And holding down the two buttons has done nothing!

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Why does my iTunes only show iTunes U and podcast options

    Why does my iTunes only show iTunes U and podcast options at the bottom. I just want to be able to watch movies on my iPad :(
    Plus when I go to the videos app and tap go to iTunes Store I get a blue message that says "cannot connect to iTunes Store".
    Help please, very frustrated as I'm not at all tech savvy

    Check what you can buy in your country:
    http://support.apple.com/kb/ts3599

  • Hello - When I steam Netflix from my iPad, I only receive black and white on the TV.  Any ideas why?   Thank you, jackiedd

    Hello - When I stream Netflix from my Ipad, I only received black and white TV reception??  Any thoughts why?  Thank you, Jackiedd

    Nope. It will reset all settings. For fix errors.
    Or you can try Logging out and Restart your iPad and Sign in again.

  • IChat video only in black and white?

    When I use iChat, the video output is only in black and white. Does anyone know how I can get it to return to full color?

    Hi,
    Click on your own Video icon so you have a Preview of your Video
    GO to the Video Menu and Select Video Effects.
    In there whichever "Page" it is On select the middle one.
    iChat will remember any Effect or, on Intels, any Backdrop you set if it is still active on ending A Video chat.
    10:26 PM Monday; February 15, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Drop iphone 4 on floor showing black and white lines

    drop on floor show black and white line

    And what troubleshooting steps have you tried so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Why are my duotone images turning black and white when put in indesign?

    why are my duotone images turning black and white when put in indesign?
    I have been playing duo and montotone images into indesing with no trouble. Then all of a sudden as I placew them they go black and whitre. I have tried everything from re saving, re making in photoshop and differant colours et5c. But nothing seems to wrok. The images already in my document arew fine it is just new ones. If someone could help that would be great

    Can you start a new document and then load one of the duotones known to be good in the working file and have it correct? If so, try one of the duotones known to be bad in the working document in the new file. Does it work?
    If no to either suggestion, can you share one of the images known to be good and one known to be bad? ZIP 'em up and upload to dropbox and plop a link here. Or, to keep the file sizes down, you can quickly make a new set and provide those.
    As well, the ID version and OS info would probably be helpful.
    Take care, Mike

  • I own a iphone 5 the camera in photo mode showing black and white and pictures

    My iphone 5 camera in photo mode showing black and white and pictures are captured in black and white only.how to make it in colour mode

    Do you have a filter turned on?

  • Random Visio Stencils Displaying Only as Black and White Lines (No colour)

    I'm experiencing a strange problem where some Visio stencils/shapes are displaying only as black and white outlines (i.e. - without any colour). I'm using Visio 2010 on a Samsung NC900 laptop with 8gb RAM, 1.7Ghz i7 CPU on Windows 7.
    The symptoms that I'm experiencing are:
    The majority of stencils display fine in the left hand stencil window but some do not.
    Some stencils display the majority of shapes as black and white outlines but some in full colour.
    Some shapes display fine within the stencil window but change to black and white outline when I drag them to the drawing (These are typically ones that I open independently of the drawing - i.e. - by double clicking rather than via "Search Shapes").
    I've done a search on the web for this problem and have found some similar issues but none of the suggested fixes work.
    One of the stencils that I experience this issue with is the Exchange 2013 Microsoft stencil.
    I've updated Java and Silverlight (stab in the dark there) and my graphics driver is up to date.
    It's driving me mad now so any help would be appreciated!
    Nikos101

    Lori
    The remove profile worked like a charm with the greyscale images. Maybe a slight loss of contrast, but I'll hold the tiff scan in any case. I-photo would not import the image again (already in the library) but I can remove the profile on the image in my folder outside i-photo. And I think I can prevent it at import now.
    Thanks! I doubt I would ever have figured that one out.
    Marilyn A

  • Hp photosmart 7150 only prints black and white with mac

    My hp photosmart 7150 only prints black and white with mac.  I have tried installing and uninstalling, installing drivers, but no change.

    Hi,
    You did not mentioned your Mac OS X version, however I assume you have one of the latest versions.
    The Photosmart 7150 is not supported on Mac OS X v10.6, v10.7, v10.8 or v10.9 and therefore it is more than likely that there are no drivers for your OS and the used Generic Driver only provide B&W printing.
    Although it is not officially supported you may check 3rd party solutions such as the 3rd party HP-IJS print drivers which list your printer as supported.
    Be sure to install any of the 3 required downloads, then click the plus sign under Printers & Scanners, click the Use drop down and click on Select Printer Software.
    Search for your printer model form the list and select the driver, I believe that may work:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
    Although it only list up to 10.8 (Mountain Lion) it should also work on Mavericks from my experience.
    Hope that may help,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • D-Link DIR-655 wireless xtreme router

    hey is the D-Link DIR-655 xtreme wireless router compatible with leopard? Message was edited by: InstincTx28

  • IPad & IPhone 4s Air print Issue

    I have just bought a HP 6520, I''ve followed the instructions for the Printer, My MAC Pro works but then I hard wired it and installed the software with a Disc. This all works fine. I've tried to print from my ipad 2 and Iphone 4s but it's unable to

  • How do I Join Fact to Fact in the BMM

    I have a star schema in the BMM layer. Another star schema is also modelled. Now the fact table of star schema 1 has to get data from the dimension table in star schema 2. How do I join the fact tables of star schema 1 and star schema 2. They do not

  • ORA-06519 while doing transactions

    Hi, I have created a trigger on my transaction table. When a service is booked it is being inserted into two seperate tables. It is working fine, but at some times I am getting following error while recording the transactions. ORA-06519 Active autono

  • Quick Mighty Mouse Question

    Hey Guys, Im not sure if this goes here, but i followed links to "mighty mouse" and it lead me to this section. Anyway, i just got a wired mighty mouse (i figured it would be more convienient as bluetooth drains battery faster), and i was wondering w