Why does my video  not play while audio does?

Using iMovie 9 found that after bringing a clip from clips pane into my project that I could no longer insert or edit the project. The green insert cursor remained but all was frozen. After quitting, video clips in project pane will not play while audio (both audio from the actual clips and music) does play. When mouse hovers/scrubs over the clips in the project pane the video clips do come alive but not when i press space bar or play buttons (play full screen /play project from beginning buttons) in bottom left of window. Strangely video in clips pane do play when I press space bar.
I tried creating a new project and importing clips but no video will play. Same thing applies to all my imovie projects. Another strange thing, the other projects will play when I click on Play Fullscreen button but not my most recent project. Instead, when I click Play full screen button the Last (ie. last in alphabeitical order) of my projects plays instead!
I would really appreciate some help with this. Have spent a lot of hours on the project and seems like I can't even start again.  

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price                  
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Similar Messages

  • Why are my videos not playing the right way up

    Why are my videos not playing the right way up

    I took four video clips while on a trip this week.  Two are oriented the right way (playing wide on the device and imported correctly).  The other two are Tall and not oriented right.  Orientation is 90 degrees to the right.  I don't know why this is happening on occasions.  Even some pictures I took did the same **** thing.  It's weird.  And I can't figure it out.  The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.

  • Video not playing but audio is fine

    I imported Video High 8 to avi files on an external hard drive from a pc and now wish to edit it in Imovie except Imovie is only playing the audio. Any help would be greatly appreciated. Thank you!

    Hi tissue:
    Welcome to discussions!
    Working with DivX and AVI files
    http://www.danslagle.com/mac/iMovie/qt_plugins/3000.shtml
    Sue

  • Why do music videos not play full screen when not in video app on iPad and iPhone?  video app is worthless, cannot sort or build playlists.

    Is there a way to build video playlist within itunes that will play full screen or landscape?  I do not like the video app.

    Greetings avilation, 
    Thanks for participating in the Apple Support Communities. 
    It sounds like when you stream videos to your iOS devices using Home Sharing, you only get either video or audio. 
    You can find some troubleshooting steps that may help this situation on this page:
    Troubleshooting Home Sharing - Apple Support
    I'd recommend starting with Step 4 (Check your network connection) in this guide.
    Best Regards,
    Jeremy 

  • When using ipad4, why do videos not play on Google?  Audio works fine

    WWhen using ipad,why do videos not play on Google? Audio still plays. I have reset the Google app and it will be ok for short time but then reverts back to not playing videos.

    Hi Vernon70,
    Welcome to the Apple Support Communities!
    I understand that an application you downloaded from the App Store, Google, is not functioning as you would expect. In this situation, I would recommend following the troubleshooting steps outlined in the attached article. 
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Best regards,
    Joe

  • Video not played using JMF while tramitting stream over RTP

    video not played using JMF while tramitting stream over RTP
    I am using code to tranmit video using RTP using JMF and i am able to successfully get the video on client side
    Code to send the video over rtp
    http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit2.java
    code to recieve video over rtp
    http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html#source
    My problem is i am not able to play video in AVTransmit2.java.
    If i create a player using datasouce, eigther i get player already occupied or a black screen.
    please help me running the video on Transmit side as well.
    NOTE: i am using web cam for video source
    Edited by: qasitouch on Dec 23, 2009 5:55 AM

    I am not getting any error on consol, rather video is not displayed on media screen but black rectangle.
    On Transmitter
         // Try to create a processor to handle the input media locator
         processor = Manager.createProcessor(ds);
    createPlayer(Manager.createCloneableDataSource(ds)); // here i am craeting a player to show the video on transmitter end aswell.
    Player code:
         private void createPlayer(DataSource ds) {
              try {
                   Player player;
                   if(processor!=null)
                        System.out.println("processor: " + processor);
                        player = processor;
                   }else{
                        System.out.println("null is processor");
                   player = Manager.createRealizedPlayer(ds);
                   Component video = player.getVisualComponent();
                   JFrame mediaFrame = new JFrame("Camera Screen");
                   mediaFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                   mediaFrame.add(video);
                   mediaFrame.setSize(300, 300);
                   mediaFrame.setVisible(true);
                   player.realize();
                   player.start();
                   player.prefetch();
              } catch (NoPlayerException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (CannotRealizeException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (NotRealizedError e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (IOException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (Exception e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
    I am not getting any error and not running on the same side. My problem is showing video on Tranmitter end.
    Using above code i can create player and a black screen is showing, i am ubable to find, why video is not played in screen.

  • Why my Ipad2 will not play rented video to a projector via vga adapter connection

    Hi, i want to know why my ipad will not play rented video to a projector using the apple vga adapter connector.  This is just basic mirroring and there should be no problem isn't it?  Please help.
    Thank you

    Technically, yes, it should be easy. However with rented videos you may be running into DRM (DIgital rights management) where you may not be allowed to play that video anywhere but on the iPad. The video could have a bit of programming in it that literally tells the HDMI or VGA output not to work.
    One way to test the connection, with your ipad's camera, shoot a short video and try to mirror that. If it mirrors and the movie doesn't then it's likely that you're simply not allowed to mirror it. If it doesn't play then there may be something wrong hardware or setting wise.

  • Captivate 7 saved project randomly does not play slide audio in preview project.

    I created a training project with over 100 slides. Each slide has an audio track that I recorded, When I preview each slide it sounds fine. When you preview the entire project, some slides randomly do not play the audio track. Try it again and other slides randomly don't play. How can I fix this and prevent it from happening?

    I concur, but do not have the device with me today, and was wondering if this is a common discrepancy. Has anyone tested Captivate output with slide audio into DPS? Does it work?

  • DVDSP Help - Video not playing in Viewer during some assets, only audio...

    Video not playing in Viewer during some assets, only audio until paused. once you hit the space bar or pause, the video shows up in viewer? same results when burnd to disc.
    when dragging cursor through out timeline (track 1) video shows up in viewer fine too.
    any advice on what could be wrong?
    at first i was thinking this was a memory problem, i added another Gig of ram and the problem still exhists.
    thanks!

    Hi Crazy Dan:
    It's a kind of bug in DVDSP Simulator. If you build your project in your hard drive and test it with DVD Player all video will play fine.
    I would like to tell you where exactly the problem is located, but it's just a Simulator problem.
    Try building your project.
    Hope that helps !
      Alberto

  • Embedded MP4 videos not playing in iOS Safari

    Hi everyone,
    I'm having a problem with embedded MP4 videos (e.g. YouTube videos) not playing correctly in Safari. When I try to play one, I get one of two problems:
    1. On my (first gen) iPad, Safari usually crashes.
    2. On my iPhone 4, videos will load but only play audio, not video, though when I tap on the screen the "play" and "pause" symbols appear.
    Has anyone else run into this problem? Or know how to fix it?
    Thanks,
    Mike

    Ok, I fixed it. Go to some embedded Flash video, click to run and then right click to get Global Settings for Flash. Go into Storage and make sure you aren't blocking any data from being stored on your computer. At the very least choose the "ask me" setting. (For good measure I also went into Advanced and clicked to Delete All Data associated with Flash. But when I restored Block for data storage the videos stopped working, so that seems to be the answer.) I'd be interested to hear if this works for others.

  • Cap 4: Flash Videos not playing correctly

    I have flv files on 3 different slides of my project. When I publish the project, the 2nd and 3rd videos will play the audio but the video only displays the first frame from the first video.
    I published the flv files from Camtasia 7. Does anyone have any suggestions?

    If you think it could be a Firefox setting, try:
    '''Create a new Firefox profile'''
    A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
    Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
    firefox.exe -P
    Any time you want to switch profiles, exit Firefox and return to this dialog.
    Click the Create Profile button, choose a useful name (like May2014), and skip the option to use a non-default folder location. Then start Firefox in the new profile you created.
    Does Flash work any differently in the new profile?
    When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

  • Why do some videos opened/played from Safari only open to about a 2" square. Can't get a full screen view?

    Why do some videos opened/played from Safari only open to about a 2" square. Can't get a full screen view? I have Safari 5.0.6 and QuickTime Player 7.7. Thanks

    Hi, Daryl -
    If you moved the G4 around to make room for the new machine, that could have jarred the processor loose. It's not unusual for that to happen to an older machine, though it usually happens to RAM or cables, not to the processor.
    Years of heating and cooling can loosen a connection and cause some oxidation of the contacts; subsequent moving of the machine, coupled with just a bit of thumping or torquing of the chassis, can cause the connection to fail. Reseating the connection not only makes it secure again, it usually wipes the oxidation off of the contacts.

  • Facebook videos not playing on iPad Air(safari browser)

    Why do my Facebook videos not play in iPad Air(safari browser) but same video play nicely on iPhone 4(safari browser). It asks me to download flash player to play on iPad but plays fine on iPhone without giving any prompt to download flash player.

    You should not have trouble playing using the FaceBook app.

  • Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

    Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

    What happens when you play music? Do the hardware volume controls work when using the Music app?

  • Video not play on phone

    Mp3 play but video not play my phone
    my Email add. [email protected]
    Moderator's note: E-mail address was removed. Please don't publish your personal contact information on a public forum.

    sharankumar1, which phone model do you use? Nokia phones are a bit picky about the file content, the codec. If you tell me your model, I tell you the available codecs. In the meantime, you have to convert your videos …

Maybe you are looking for

  • Errors: can't find symbol, libraries Jung

    Hi, I was trying some graph libraries (Jung) when I got the following errors: line 43: cannot find symbol symbol : method setPreferredSize(java.awt.Dimension) location: class edu.uci.ics.jung.visualization.BasicVisualizationServer<java.lang.Integer,j

  • Facebook will not let me sign in on my ipad2 saying I am infected with malware...***? It says I must remove the malware first to continue...how do I do that with an iPad?

    Tried to sign in on my Facebook account and it would not let me as it says my computer/device is infected with malware and I must remove the malware before I can continue...So how do I do that on an iPad? I was just signed in to FB an hour earlier on

  • Building a new Laptop!

    This is the best configuration I've been able to find and stay around my 2K price point. Advice or suggestions would be appreciated. And has anyone ran cs6 on windows 8 yet and how is it doing. 1920 x 1080 17.3" FHD LED Backlit Matte Display Customiz

  • C3560G - SNMP MIB Support for QOS Port Trust

    I've been digging through Cisco's SNMP Object Navigator without any luck, so I'm turning to the masses to see if someone has an answer. I'd like to know if there is a supported MIB on the C3560G platform (for any IOS version) that will report the QOS

  • Freelance labview developer

    freelance developer looking for short term labview projects. based in the uk, 6+ years labview experience including data acquisition and analysis, simulation, experiment control software and image processing. All projects considered.