Why does my Web Publishing Tool fail to create an image of my front panel when I select the "Embedded" viewing mode?

I am trying to create an html file for access by a client computer through the LabVIEW Web Server. I want to enable the client to control the vi, so am chosing "Embedded" for the Viewing Option in the Web Publishing Tool. The small preview screen in the Web Publishing Tool shows an image of my front panel, but the resulting html file does not include this image. The Web Server error log shows a 404 error which I believe is due to the lack of an image (or any front panel objects) present in the html file: Error: 404 "Not Found" for "/.lv_frontpanelprotocol.rpvi100", file "c:/program files/national instruments/labview 2010/www/.lv_frontpanelprotocol.rpvi100": Can't access URL
If you are aware of this problem or know any solutions, please post a reply.
Thanks,
David

Does it work if you preview the web page locally?
Does the client computer have at least the minimum 2010 run time engine installed?
(quote: Additionally, the Run-Time Engine allows your browser to display VIs that are embedded in Web pages.")
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Why does my macbook pro 2011 keyboard/trackpad make noises like it's bending/crinkling when i move the computer?

    Happens when i reposition the macbook.  Also occurs when i apply slight pressure to case (wresting my wrists on it), but doesn't require it to happen.  2011 Thunderbolt 15" macbook pro - stock.

    Check if an AASP (Apple Authorised Service Provider) is closer, as some do not trust Geek Squad to diagnose something as simple as "all the keys are missing". But judge for yourself.: http://support.apple.com/kb/HT1434

  • Web publish tool creates blank page

    I've been having some trouble with the LabVIEW web publishing tool. It seems that when I try to publish the front panel of my vi, a blank web page is produced instead. To publish, I select Tools>>Web Publishing Tool..., then select my VI from the VI name dropdown menu. I select monitor mode and use a refresh rate of a couple seconds. From there, I try to view a page preview, but all I see is a blank white page. When I try to view the html source of this page, it looks like a blank html document (i.e. view source just shows a blank page as well). 
    When I follow the web publishing wizard through to completion, I visit the address that the page is supposed to be published at, but get the same blank page results as I did in the preview. Note that I don't get a 404, just a blank page. However, when I look at the html document that was produced, it does contain a page (I've attached the html it produces, all I've done is change the extension to text so I could upload it).
    I'm running LabVIEW 2009. The vi in question is in memory, running on the server computer. I have enabled the web server, but in the web publishing wizard, the "Start Web Server" button is inaccessible.
    Does anyone know what might be wrong? Or better yet how to fix it?
    Attachments:
    exampleForForum.txt ‏1 KB

    Jordan,
    What I meant was that the VI was running on the computer that is acting as the server, which is in fact the same computer I was testing from. So yes, the problem still arose there. I have made some progress on this issue- it seems that it might be due to some bug with the Browser Access List. Our Browser Access list was empty. Whenever I tried to add something to it (i.e. by typing "*" into the Browser Address bar, selecting the "Allow viewing" radio button and then clicking the "Add" button), a blank entry would show up in the Browser access list. After hitting "ok" on the options box, the blank entry seemed to dissapear; when I would revisit the settings page under "tools->Options->Web Server" the browser list would show up totally empty again.
    I was able to fix this problem just by typing "*" into the Browser Address bar, clicking "Add", and toggling back and forth between the radio button access options a few times. Eventually the * showed up as an entry in the browser access list, and when I hit ok the option seems to persist (so I can leave the Web Server options dialogue and return to it later to see that the * is still added with the proper permissions).
    However, I'm still having problems. Now when I visit the url of my web published vi, I get the message "Client does not have access to the specified VI." I currently have the settings such that I think all browser clients should have view & control permissions for our published vis. I have attached a screenshot of this message and of our current browser permissions screen. Is this the proper set up? If not, what do I need to do to give viewing permissions to all clients?
    Attachments:
    screenshotWebPublishProblem.png ‏28 KB
    screenshotBrowserPermissions.png ‏52 KB

  • Why does my adobe creative cloud fail to update reflow cc 2014?

    Why does my adobe creative cloud fail to update reflow cc 2014? it says:
    Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support after 43% installed

    Error 50 https://forums.adobe.com/thread/1432237 may help
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Why does my web page reduce so small I can't read it?

    Why does my web page reduce so small I can't read it?

    The type is small on the website but that's because of all the stuff that they are cramming onto the page. A couple of other users made this same comment about eBay a while ago, as I recall.
    There is no setting in Safari in which you can enlarge the size of the text.

  • Why does it say face time failed on my iPad every time I try to make a call???

    Why does it say "face time failed" every time I try to make a call?

    I have had that happen to me a number of times. Try this. Quit the mail app and then relaunch it. From your home screen, double tap the home button. Hold down on the mail app icon in the recents tray until it wiggles. Tap the minus sign to close it. Tap the home button. Launch mail again.

  • Web publishing tool, I can't show the panel in embedded mode.

    I don't know what happen but I have try every thing and still without the possibility to make a preview of my VI in the "web publishing tool" and also can't show the panel in embedded mode.
    I can see the preview in the browser but it remain forever "downloading panel" and nothing more else happen.
    Please help me because I don't find any explanation to this problem in Google.
    Additional information:
    1) I am using Labview professional development system 8.2 under Windows XP SP3 (it was the same under SP2), also in vista ultimate.
    2) In the attachment I show that I'm using Mozilla Firefox but is the same problem under IE.

    I don't think the preview ever shown an image.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Why does my web page, created on iWeb, look correct on Safari but has thick black lines all over it in Firefox?

    Why does my web page, created on iWeb, look correct on Safari but has thick black lines all over it in Firefox?

    What's the URL of your site so we can examine it first hand?  I assume those black lines are around photos or objects that have had a frame or drop shadow added to it, right?  If so that's a known issue. 
    There's a workaround for that in this tutorial: #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single Image File.  That should get rid of those black lines/boxes.
    OT

  • How to run an aplication of say 5 screens(Fr​ont panel) using web publishing tool

    Hi,
    I am trying to run an application through  web publishing tool which is having 5 screens. I could able to see the very first screen successfully but as i navigate to the other from my application, new screen is not displaying. I also tried the same by including the url while building exe also but not working.
    Please guide me.
    Thanks,
    Subbu
    LV 8.0, 8.6, 2011,2012,2013 WinXP
    Solved!
    Go to Solution.

    HI,
    If you are going to develop a web application, you should be very clear and careful about this.
    On Web the pops and your popup subvis will not work properly, You have to develop your application on Tab control. Your complete solution should be in a single packet.
    If you want to give the access to different-different 5 users you can easily provide it. All users can monitor and control your application easily on web.
    Its upto you, you can define the number of users to access the web application.
    If you publish your application on local IP this will work only in your local network but if you publish it on your public IP this will work as a web application like Google, gmail, yahoo.....
    Thanks and Regards
    Himanshu Goyal
    Thanks and Regards
    Himanshu Goyal | LabVIEW Engineer- Power System Automation
    Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
    It Only gets BETTER!!!

  • Sharing a labview data on the internet by using web publishing tools

    Hello,
    Recently I was trying to display the real time data(dynamic) with front pannel of vi on my localhost and i have done that by using a Web Publishing Tools.
    But now i want to display the same front panel on internet which can be viewed by everyone and the data must be running as per controlled in vi.
    I don't get the clear concept of how to deploy the data on my webpage with real time display front pannel.
    The think is i have a working website and the .html file of my vi created through web publishing tool.
    But not understand that how can i view it on a web page with a address "www.xxxxxxx.com" coz its only visible with the help of localhost.
    Regards 
    Mangesh
    =========================================
    Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
    Mangesh D.
    CLAD | Project Engineer
    ==
    VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....

    Your computer needs a DNS name (available online through many free and paid services) and then your network needs to allow outside access to your computer.  Then you should be able to access your remote front panel from anywhere.
    Chris
    Certified LabVIEW Architect
    Certified TestStand Architect

  • Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them

    Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them.
    Notice how in the photo, I can't identify which MS office document I would like to switch too. Perhaps since the Dashboard and Desktop windows are at the top of my screen now Apple doesn't let you have all the applications take up the full screen and be sized individually so that you can have a better idea on what to pick.
    I like the idea of grouping to an extent... If you have a bunch of random things it was hard for me to decifer between what was safari, chrome, or word. But now that they grouped them like this, if you have multiple pages of one program running, you can't switch between those pages easily like before.

    If I wanted to open any of my Applework documents I had to open them one at a time and resave them with pages. This could take weeks.I have 1000s of apple work documents.
    You don't have to open and re-save every AppleWorks document you have right now. Just wait till you need one, then do it. The documents aren't going anywhere.
    Am I dealing with Microsoft? This was a BIG surprise to me that Apple would release an OS without testing all programs.
    Frankly, it is not Apple's responsibility to ensure compatibiltiy with every piece of software available for OS X. That is the responsibility of the software vendor. Lion has been available to developers for several months before it's release, so Microtek had plenty of time to update their software. Yet they did not. How is that Apple's fault? I think Apple was very generous to give you a refund for Lion.
    I'm not trying to belittle your frustration but I do think your ire is misplaced.

  • Why does my iPod touch take a lot of time to update and download apps? I got the one of the fastest wifi

    Why does my iPod touch take a lot of time to update and download apps? I got the one of the fastest wifi

    Try this:
    Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.

  • HT4352 Why does my sony tv pick up my apple tv but my new LG has no signal from the HDMI input?

    Why does my sony tv pick up my apple tv but my new LG has no signal from the HDMI input?

    Hi midknightsurfer, 
    Welcome to the Sony Community! 
    Please try the following troubleshooting steps.
    Check for a firmware update for your router. 
    Make sure the router is broadcasting the Service Set Identifier < SSID >.
    Please try other device/s. Connect them to your network (wired/wireless) then test those units. 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Why does my itouch,after i restored it with itunes, it turned of and kept turning on to the apple and it still doing that?

    why does my itouch,after i restored it with itunes, it turned of and kept turning on to the apple and it still doing that?

    Sounds like a hardware issue. Have it serviced if it's in warranty.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Why does compressor settings of aac audio, stereo, create 2 channel mono from 2 discrete audio channel movies?

    Why does compressor settings of aac audio, stereo, create 2 channel mono from 2 discrete audio channel movies?

    well depending on how your audio is brought into your system you can select it as two streams of mono or a stereo pair. In reality, unless it's mixed in stereo, that's just two streams of mono locked together. Other streams brought in via other means, can have a lot more audio channels, e.g. 8, 16, 24.
      In your case, with what you're doing, two separate channels works best, so you can control the levels of two very different audio sources. If, for instance, you were taking the feed from the mixing board during a concert, you might want their stereo out. Otherwise you might be dealing with the 1.2 zillion channels that they're mixing live.
       I like separating the tracks coming in. I work with people who prefer to lock them together. Locking means the tracks move together during editing. Ok, fine, but I'm usually dealing with different audio sources, like you are: a camera mic (safety on location) and a close mic (shotgun, lav). Or I have a shotgun source and a lav. I want to determine the best source audio for the shot. Sometimes it's a lav, sometimes a different feed from somewhere else, sometimes the shotgun, and sometimes a mix of two sources. But if they're locked together and pre-set to come out evenly from both speakers there no way for me to make a determination. The other guys like to cut and figure out the audio later.
      To each his or her own. . .

Maybe you are looking for

  • How do I add inserts in Logic Pro 9?

    Seems simple enough.

  • Weather widget for E6 belle

    I updated my E6 from anna to belle and was shocked to note that the belle doesnot come with Weather widget??? can somebody help me where can i find them and install. Thank you.

  • Parameter class casting problem

    The question is: how to get the right method based on the type of the parameter passed? Here is the code: public class Test {   public static void main(String[] args) {     Integer l = 57; // automatic boxing     Object o = 43;  // automatic boxing a

  • Build up correlation set problem

    Hi everyone, I follow "Using Correlation Sets Example" in Developer's Guide as a model to build my own simple process. But got a compiling error said:"Error:null", that's all. Does anyone know what's going on here??? Do I miss something?? Any documen

  • Telephone number showing on my profile

    My contacts can see my real phone number on my profile and if I go to edit my profile I don't have any number added to my account. I just want to know how can i delete that nunber. Help me. Thank you.