Why does my webpage tell me I need to update??

I am quite new to flash. I am using the CS4 version. I have added a swf into my website with all the relevant Javascript, etc....and when I upload it and view in browser, it doasn't show.. add tells me I need to update my flash player to view it.
Have 10.1..... as far as I know is the latest version... WHAT AM I DOING WRONG??
Please can someone help me?

Hi, thanks. Just had an electrical outage, back on now. What I would check first is using FF, find the plug-in SWF vs 10.1.53.64 and make sure it is Enabled.
If you have Installed Flash Player in IE, then I can have you check for the Shockwave Flash Object in the add ons and make sure it is Enabled as well. I can give you better directions to find that, just let me know.
Also, to confirm the Flash Player files, go to C:\Windows\System32\Macromed\Flash Open Flash and post back all files listed there. The NPSWF needs a right click and then click on Properties in order to obtain the version number.
Thanks,
eidnolb

Similar Messages

Why does Adobe keep telling me I need an update for my Flash Player?

When I say OK, it says my system won't support it. Shouldn't it know that before telling me I need an update? I am runing Snow Leopard.

What is your installed Flash Player version?
You can try to download the latest version from http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

Why does Apple TV tell me I need HDCP?

I have two identical TVs with two identical AppleTVs and two identical HDMI cables. One Apple TV plays perfectly when I order a movie and the other says I need an HDCP compatible cable. Why is this happening?

Hi, thanks. Just had an electrical outage, back on now. What I would check first is using FF, find the plug-in SWF vs 10.1.53.64 and make sure it is Enabled.
If you have Installed Flash Player in IE, then I can have you check for the Shockwave Flash Object in the add ons and make sure it is Enabled as well. I can give you better directions to find that, just let me know.
Also, to confirm the Flash Player files, go to C:\Windows\System32\Macromed\Flash Open Flash and post back all files listed there. The NPSWF needs a right click and then click on Properties in order to obtain the version number.
Thanks,
eidnolb

Why does a document tell me it needs to be opened in newer version of Pages yet when I check the Mac App store I already have it upgraded

I can't seem to open Pages documents and am told "You need a newer version of Pages to open this document" however, I have checked for upgrades in Mac App store and am told all apps are up to date. When I open Pages and check "about Pages" it says I have 4.3. What gives?

It sounds like you already have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

HT5192 why does my phone tell me that after trying to update my software to ios 5.1 that an error has occured

why does my phone tell me that when after updating ios 5.1 that an error has ocurred,ive tried 3 times and im still getting the same message?

Call Apple in the morning.
Possibility could have been you had caps lock on entering your security answer either now or when you set it up from the beginning.
Apple will help you out and you will be in good shape.
If you are not into phone calls then try to make an appointment at your local Apple store and they can fix it for you in no time.

Why does iphoto 11 tell me to update library every time i open it?

why does iphoto 11 tell me to update library every time i open it?
iPhoto '11 OSX 10.8.5
I open iphoto and I get the message
"the Photo library needs to be upgraded to work with this version of iPhoto"
I click upgrade and after a few seconds the photos show fine, the application works correctly.
then I quit the app. and reopen and i get the same message and the same results.
this was happening before I did a complete erase of the Macbook Pro and install of Mt Lion
upgraded from lion.
only thing thats the same is the computer and the library I restored.
RT

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

HT202157 Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.

Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.

Hello Rickpoulette,
The following article provides further information and could very well help get your Apple TV and your television cooperating again.
If HDCP authentication does not succeed, you may see one of the following symptoms:
A message may appear on your television stating "This content requires HDCP for playback. HDCP isn't supported by your HDMI connection."
You may see periodic bands of static, or full screen static, flashing across your TV screen.
If you are experiencing either of the symptoms above, try playing the same content again for at least another 10 seconds. If the issue persists, try the following steps until the issue is resolved:
Connect your Apple TV (2nd generation) directly to your HDTV using an HDMI cable.
Set your Apple TV and HDTV to off or sleep mode
From the Apple TV interface, select: Settings -> Sleep Now.
Turn off your TV and wait for about 10 seconds.
Turn your TV back on.
Press the Select button on your Apple TV remote to wake your Apple TV.
Some HDTVs may need a firmware update. Consult your TV manufacturer's user manual or online support pages for additional information about how to update your TV's firmware.
If available, try using a different HDMI to HDMI cable, such as an Apple HDMI to HDMI cable, directly between your Apple TV (2nd generation) and 720p HDCP-compatible HDTV.
Apple TV (2nd generation): About Apple TV and HDCP
http://support.apple.com/kb/HT4428
Cheers,
Allen

Can't update the flashplayer becasue it states I need to close firefox? Not sure why, I have an updated version of flashplayer but when I go in through firefox it tells me I need to update it, but won't because I am in firefox.

Can't update the flashplayer becasue it states I need to close firefox? Not sure why, I have an updated version of flashplayer but when I go in through firefox it tells me I need to update it, but won't because I am in firefox. This seems to be a problem when I am in FB.

You must close Firefox to install the update after it is saved to your hard drive. Follow the instructions below.
There are 2 versions of Adobe Flash. Both must be installed and updated on Windows systems. In Firefox it would show as Shockwave Flash in your plug-ins, if you had it installed.
*an ActiveX version for IE only
*a plug-in version for Firefox and most other browsers
#'''Install or Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video?

Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video? where can I find this codec?

hey, I'm not sure if I've set it up for hard drive video. When I
try to import it says it's the wrong codec. I had a similar problem with windows moviemaker.
except the error message there (moviemaker) said 'too many methods firing from events'
hmmm. I don't know what it all means. I have an hdd sony digital handycam.
dcr-sr45 is the model. any suggestions?

We're sorry, we are unable to continue with your activation at this time. why does this do this? i need help

We're sorry, we are unable to continue with your activation at this time. why does this do this? i need help please.

Activation issues are typically the result of a device that has been hacked or jailbroken. Is this the case?

Why does my iPad tell me to contact iTunes support to complete transaction.

Why does my iPad tell me to contact iTunes store to complete transaction?

Contact itunes support and find out.

Why does my iPad tell me my airport network "cannot be set up by this software"

why does my iPad tell me my airport network "cannot be set up by this software"?

You likely have an older version of the AirPort router which is not supported by AirPort Utility for the iPad.
Check the model number on the bottom....if you have an AirPort Extreme.....or check the model number on the side of the device......if you have an AirPort Express.
Post back with that model number.

I have a 4th gen. ipod touch. It has software 4.2.1 and itunes always tells me I need to update to ios 6. I always click download and install. After the download is complete, nothing happens. It doesn't install on its own. Thanks,

I have a 4th gen. ipod touch. It has software 4.2.1 and itunes always tells me I need to update to ios 6. I always click download and install. After the download is complete, nothing happens. It doesn't install on its own and there is no option to install manually.. Thanks.

Are you sure it is a 4G iPod? Does it have a camera?

HT4623 Why does my iPhone 4 not have the Software update option when I go into the settings?

Why does my iphone 4 not have the Software update option when I go into my settings to get updates?

That was made available in iOS 5. To update, you may need to connect to iTunes

Why does my system hang on a blank software update screen after I shut down?

Why does my system hang on a blank software update screen after I shut down the computer?
This only happened after my computer attempted to download security update 2013-003 version 1.
I have an iMac with a 2.16 GHz Intel Core 2 Duo running on OSX 10.7.5.
I repaired all disk permission, and then verified and fixed the disk.
My hardware diagnostics program gave all systems a green light.
After all this, the system still hangs.
This must be an operating system glitch.
How do I fix it?
If you tell me to reload the operating system, then I'll have to go retro with Snow Leopard.
All subsequent updates were purchased from Apple on the Internet and downloaded.

Cineast wrote:
If you tell me to reload the operating system, then I'll have to go retro with Snow Leopard.
All subsequent updates were purchased from Apple on the Internet and downloaded.
Not so. You use the recovery mode to reinstall Lion. Details in Recovery and About OS X Recovery. Also, see Computers using Internet Recovery.

Why does my webpage tell me I need to update??

Similar Messages

Maybe you are looking for