Why does netflix come up as a grey scene? I dumped the app and now when I try to load the new app and touch "install now" nothing happens

I just can not load the netflix app. I touch the load app and na da.

It appears that you have apps that need updating that were pruchased from more than one account
- Go to settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Similar Messages

  • Why does siri come on by itself while it sits on the table no one touching it?

    why does siri come on by itself while it sits on the table no one touching it?

    michael jfromtaunton wrote:
    why does siri come on by itself while it sits on the table no one touching it?
    If you're not running iOS 8 as you describe you are not, and Siri keeps coming on, this could be a hardware failure of the Home Button.
    Try these steps:
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • The game "horn" does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!, The game horn does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!

    The game "horn" does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!, The game horn does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Delete the app and redownload.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • When I try to load ABC news I get the error message that says Firefox stopped this page from loading. Do you want to allow it? Of course I do, or I would not have gone there. It does not do this onother pages. How do I make it stop?

    It consistently does this when I try to read ABC news and when I try to go to my bank's web site. I am getting real tired of this. This message will pop up over and over even after clicking allow. How do I shut this off it is really annoying.

    See:
    *Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    See also:
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel#General_tab
    *http://kb.mozillazine.org/accessibility.blockautorefresh
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • Why does itunes send me an error message that says to verify my network setting when I try to download updates?

    Why does Itunes send me an error message that says to verify network settings when I try to download updates?

    Disable ALL security software (firewall, antivirus/spyware, etc) when updating.

  • Why does Firefox not respond to any commands (it wouldn't even want to close) when I try to watch a stremline video from a webpage although all video-plugins are updated? The problem occured spontaneously, no changes were made to the system/settings.

    Firefox does not crash but it 'freezes'. I cannot do anything with it then (it may be closed only from the task manager). Upon each subsequent opening the problem reappears (the fourth day in a row).

    Haroon mentions two solutions. I used the easier one, which is to start the Apache webserver already in Mountain Lion and to enable the php already in Mountain Lion. It worked. I see the file correctly displayed with html, css, and php. I see the page by using Firefox. I enter an address in the address bar. For example, the address might be "localhost/example/example.php". I cannot see the page by using Firefox's "Open File ..." menu option or by dragging the file's icon onto Firefox's icon. I tried using your solution also but was unable to find the specific preference to modify. I found the page of preferences which may be modified but I could not find the one I need. I found a list of descriptions of the preferences at http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries
    but I could not find the specific preference which I need.
    By the way, to enable loading the php module, one uncomments a line of code by deleting the initial "#" character, and one does that by pressing control key and "P" key while the cursor is over the "#" character.
    Also by the way, when I use Firefox or Safari to look at the Apache web directory in which my files are, the files are listed case sensitively. For example, the files are listed: Ace, Zygote, bar. This is because lower case follows upper case. THis annoys me. I prefer case insensitive listing. When I llok directly athe directory without using a browser, the files are listed case insensitively. For example, they are listed: Ace, bar, Zygote. I guess taht Apache is doing this.

  • Why does my iPhone 5 keep saying could not sign in unknown error has occurred when I try to log in to my apple ID?

    Please help I can't do anything on an apple product without and apple ID!?

    Check - settings - appstore - appleid - I would log out and then log back in and see if that helps.

  • My new LG exalt does not play my music from the sd micro card. my old phone was a LG wine III. why does it not play from my old lg wine to the new one

    my

        Let's get your music playing, beans3! What happens when you try to play your music from the SD card - Any error messages?  Do the songs show as downloaded to your phone? Please share details so we can help.
    TanishaS1_VZW
    Follow us on Twitter@VZWSupport

  • HT5177 Why does Final Cut Pro X tell me mpg is supported, but wont recognize it when I try to import it from my files??!!

    I am trying to import an mpg file and Final Cut Pro X wont recognize the file.. please help.
    Final Cut Pro says it is a supported file, still wont recognize it!

    Yeah depends on the source but generally MPG hasn't ever been supported in Final Cut Pro- as Tom says you want to convert it to ProRes elsewhere before bringing into FCP X.

  • Why is it that there I can't have more than 2 tab groups? When I try to open a new tab group than it replaces the tab in the old tab group. will

    Using the latest Firefox version of 9.0.1

    I'm having difficulty visualizing what is wrong but try some basic steps first:
    Launch Safari while holding a Shift key - this will start Safari with just your Home page
    If you can see Reset Safari from the Safari menu, try that.
    In addition to downloading and installing Safari again, try reapplying just the Snow Leopard Combo Update: http://support.apple.com/kb/DL1399 There is no need to uninstall Safari first.
    Lastly try deleting Safari's Preferences file: ~/Library/Preferences/com.apple.Safari.plist

  • Why does my Mac boot with a Grey screen and a globe?

    Why does my Mac boot with a Grey screen and a globe?

    Usually means you don't have a bootable system installed so the OS is looking for a bootable system on the network.
    Does the computer eventually start up shortly after the globe appears? If so then open Startup Disk preferences, select your boot volume and click on the Restart button. If this is not the case then you need to reinstall Snow Leopard.
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Why does it come white when i take a picture on my Iphone4s? it's new, I bought it before 2 weeks ago. what can I do?

    why does it come white when i take a picture on my Iphone4s? it is not all of the pictures which becomes white, but some of them and it is not because i used flash. the phone is new as well , I bought it before 2 weeks ago. what can I do? please need help.

    First step in troubleshooting is to reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Why does my iPhone 5 take very grainy flash photographs in the dark will a hard reboot be safe to do to try to fix or is it a hardware issue?

    Why does my iPhone 5 take very grainy flash photographs in the dark will a hard reboot be safe to do to try to fix or is it a hardware issue?
    And By hard boot I mean holding the home and power button down at the same time for 10 seconds or whatever
    I see other people have these grainy flash photographs if you try to take a picture in darkness the picture comes out very dark and grainy I thought the software would ultimately fix this but it's been going on for over a year I usually take my photographs in daylight but I need this to be fixed
    If it is a hardware issue I hope Apple will replace my iPhone 5 because I was just waiting for one of the iOS updates to fix it I bought my phone in November 2012 its the iPhone 5
    Please help or advise if you can was this just a software or hardware issue I know Apple was aware of it but I was advised that iOS update would fix it but obviously not
    Is it safe to do a hard boot on my iPhone five by holding the power and home button at the same time for 10 or 20 seconds I saw someone said that fixed there's at least temporarily
    I'm typing this on my iPhone five right now why do the words go off to the left and right no matter if I hold the phone vertical or horizontal the words bleed off to left right so for me to proofread it I have to move my text left to right to proof read it
    Thank you

    The flash on a smartphone camera is tiny. It only lights up a very small area right in front of the camera. It won't light up the whole scene.
    Have you seen the size of the flash on a professional camera? Even they can't light a whole scene in the dark.
    Fact is, a smartphone camera is not capable of taking good photos in the dark, even with the flash.
    You'll need to buy and learn how to use a professional, dedicated SLR camera to be able to take good photos in the dark. It is not easy.

  • WHY DOES IT ACT LIKE I AM OPENING ITUNES UP FOR THE FIRST TIME

    WHY DOES IT ACT LIKE I AM OPENING ITUNES UP FOR THE FIRST TIME

    dewin1or wrote:
    I want to extend the length of the song by repeating the first 28 measures.
    split the region at the 28th measure
    http://www.bulletsandbones.com/GB/GBFAQ.html#split
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    then select only the first region and option-drag it to the end of the song

  • When I push play, why does it play back all tracks instead of whats in the arrangement view?

    Why does it play the track even when there aren't any files in the arrangement view?

    It sounds as though "something" has become corrupted. This can be the result of an add-on, or it might be that reinstalling Firefox will help. Here are some diagnostic suggestions:
    First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does that fix it? If not, try creating a new (blank) profile: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
    If the new profile works, then you either can work to track down the problem with your old profile, or move key settings like bookmarks from your damaged profile to the new profile, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

Maybe you are looking for

  • Hot to copy text from a Popup Windows in SAP CRM 7.0?

    Hi guys, we want to copy text from a POPUP Windows but you cannot highlighttext there. We've tried with "Popup to Decide List" and "Popup for Reuse components". Do you know if is possible to copy text from a POP-UP Windows in CRM WUI 7.0? We also hav

  • Menubar "Time Connected" behavior changed after recent updates

    Hi folks I have been using my AXBS (11n with USB) with an DSL connection. You can choose to display the time connected from the drop-down list from the Airport icon on the Menu bar. Before this upgrade (Utility 5.5.1 and firmware 7.5.2), the "time co

  • How can the info block be assigned with the view and assign view to users.

    Dear Friends, Anyone could plz tell me how can the info block be assigned with the view and assign view to users.  Also how can the info block in sale summary be assigned with a view and how to assign this view for user. Regards, Ashima

  • Session replication in oc4j load balancing not working ..

    Hi All, I have windows 2000 machine. I have installed 2 instances of oc4j running on ports 8888 and 8889. I started the loadbalancer.jar in the first instance, started the first oc4j instance and then started the second oc4j instance. I have a common

  • Bill in collections on a current account?

    I have had my account for probably 10 years now, and I just saw there was something on my credit report recently from Verizon Wireless -- some kind of bill in collections. We pay the bill, and the account is still current/active, so how can I have so