Why does new pages export a document to Word format as a complete mess?! It is impossible to work with such crap!

thats my question

As we can not see the "complete mess" maybe you should describe the problem to us?
Or were you just letting us know?
Peter

Similar Messages

  • Trouble Exporting a Document to Word format

    I just installed the update to Pages and now can't seem to export a Pages document to word.  The document has a lot of tracked changes in it and I am getting an error message of "an unknown error has occurred".  Any suggestions how to fix this?

    As we can not see the "complete mess" maybe you should describe the problem to us?
    Or were you just letting us know?
    Peter

  • Why does my pages app crash when I try to email a document?

    Why does my pages app crash when I try to email a document?

    Check for an update. Also if you're on 3G, try to doing it over WiFi to see if it works better because sometimes the network just can't handle it so the app crashes to protect itself.

  • Team Blog: Why does my page look different in BrowserLab?

    Duane O'Brien, engineer on the BrowserLab team has a new blog post on the BrowserLab Team blog that you might find interesting. It covers when/why you might see rendering differences between the BrowserLab browsers and your local browsers. Good info.
    http://blogs.adobe.com/browserlab/2011/07/11/why-does-my-page-look-different-in-browserlab /
    Bruce
    Bruce Bowman
    BrowserLab product manager
    BrowserLab Team Blog: http://blogs.adobe.com/browserlab
    Twitter: @brucebowman, @adobebrowserlab

    As Wyodor indicated IE is not the most advance, up-to-date browser out there.
    See Roddy’s tips for making iWeb pages more compatible with IE.
    OT

  • Why does my php export feature work in IE and not firefox?

    Why does my php export feature work in IE and not Firefox? I've written a web application which contains a SigmaGrid. The grid controls reload, add update delete, print and export to csv all work in IE8. The export feature does not work in Firefox.

    I'm not sure what's going on for you. I've had 4 other developers - two on Comcast and two on Fios review my work and they get the control and export action in the IE8 version but not the FF10 version.
    Thanks for looking into this for me, though. I appreciate the effort. '' The operation was a success doctor, but the patient died.''

  • Why does the page not move smothe when i scroll?

    Why does the page not move smothe when i scroll?
    Sometimes it even move slower then i Scroll?
    I use a Mac and i have tried to reinstall the program.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
    * Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    See:
    * [[Troubleshooting extensions and themes]]

  • Why does redirect page open in a frame?

    Why does redirect page open in a frame? I don't see the point. Can it be made to open in it's own window?

    We now support an option for having the redirect for an embedded form take over the entire window. This FAQ explains:
    http://forums.adobe.com/docs/DOC-1991
    Randy

  • HT4641 Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

    Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

    Hi @kots 
    I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • WHY WHEN I EXPORT A DOCUMENT TO WORD CAN´T EDIT?

    WHY WHEN I EXPORT A DOCUMENT TO WORD CAN´T EDIT?

    Hi Tami,
    I'm so sorry for your frustration! I'd like to assist.
    Is there a chance your PDF was originally a scanned file? As these can be tough because the converter doesn't have anything solid to grip onto.
    Let me know and we can try and troubleshoot together!
    Kind regards, Stacy

  • Why does quicktime only export audio

    Why does Quicktime only export audio when exporting .mov files? I used to do it all the time with this same version. Now it doesn't work. I see a lot of other posts asking the same question and no answers.

    Why does Quicktime only export audio when exporting .mov files? I used to do it all the time with this same version. Now it doesn't work. I see a lot of other posts asking the same question and no answers.
    MOV files are audio and/or video content wrapped in an MOV file container. The first step in solving your problem would be to determine what codec components were used to create the source files and then determine if they are still supported by you current system configutation and/or conversion work flow.

  • When welcome page comes up I click edit, why does the page disappear?

    When the welcome page is on my screen and I click on edit, why does the page disappear and nothing comes up?

    I'm a little confused, what welcmoe page are you talking about? Can you provide a screenshot?
    Julia

  • Why does new music downloaded on one device not show up in the library of the other device?, Why does new music downloaded on one device not show up in the library of the other device?

    Why does new music purchased on one device not show up in the library of the other?

    Hi Bev5638,
    Welcome to the Support Communities!
    The article below will explain how to set up Automatic Downloads for your computer and devices.
    iTunes Store: How to enable Automatic Downloads
    http://support.apple.com/kb/ht4539
    Cheers,
    - Judy

  • Why does the Page moves up and down slightly while loading?

    The page jumps (jerky) up and down while loading. The movement isn't great but is more than enough to lose your place while trying to read the part already loaded.'''bold text'''

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    You can also try to create a new profile.
    * [[Use the Profile Manager to create and remove Firefox profiles]]
    * '''[[Firefox no longer works with Windows 2000]]'''

  • Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when  it is not. How can I fix this issue?

    Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when  iall other programs are closed. How can I fix this issue?

    Thanks Jeff, I was not aware that a template could be multi-page.  (All the existing templates were 1 page)
    But it worked, saving me some steps.  When I was finished I renamed the document, and locked it.
    Then tried to save it but  could not because it was locked.  I closed it, went to my Spread Sheet Folder ,
    to find it, it was not there.  The Finder could not find it either.
    So I start over again.
    I opened up Numbers and it showed my personal Numbers template folder, it contained both my new 
    original 4 page template and the vanished saved document!
    I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again.  I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
    The secret is: Click on the document title in the menu bar, and it opens up  "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving.  Once done that, you can then lock the document in the same pull down menu, and then close it.
    I also found later that I can delete a template from its folder, by letting Numbers open the templates,
    clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
    and from there the selected template can then be thrown into the Trash from there.
    It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

  • Automator Workflow to export Numbers documents in PDF format

    Does anyone know of any automator workflow to export Numbers documents in PDF format? I tried this program: Convert to PDF 1.2
    http://www.apple.com/downloads/macosx/automator/converttopdf_mauriziominelli.htm l
    But it gives an error.

    Reading carefully is often useful.
    The description of the tool which you tried clearly states :
    *About Convert to PDF*
    *_Convert all of your text files to PDF_. This action uses the underlying cups printing system ability to convert files, it’s a simple front end to the command line tool cupsfilter.*
    As far as I know, but maybe you don't, *_a Numbers document isn't a text file._*
    I already posted a script exporting Numbers documents as PDF.
    Here is an enhanced version which apply only to Numbers '09 (or maybe higher) :
    --[SCRIPT save2Numbers&PDF.app]
    Enregistrer le script en tant que Script : save2Numbers&PDF.scpt
    déplacer le fichier créé dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
    Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
    aller au menu Scripts , choisir Numbers puis choisir save2Numbers&PDF
    Le script enregistre le document au format natif de Numbers
    et l'enregistre dans un fichier PDF.
    S'il existe déjà un PDF homonyme, il est renommé en lui ajoutant une chaîne
    construite sur sa date de modification.
    --=====
    L'aide du Finder explique:
    L'Utilitaire AppleScript permet d'activer le Menu des scripts :
    Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
    Cochez la case "Afficher le menu des scripts dans la barre de menus".
    +++++++
    Save the script
    as a Script: save2Numbers&PDF.scpt
    Move the newly created file into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
    Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
    go to the Scripts Menu, choose Numbers, then choose save2Numbers&PDF
    The script saves the document in the native Numbers format and saves it in a .pdf file
    If such a .pdf already exists, it is renamed with a stamp matching its modification date.
    --=====
    The Finder's Help explains:
    To make the Script menu appear:
    Open the AppleScript utility located in Applications/AppleScript.
    Select the "Show Script Menu in menu bar" checkbox
    --=====
    Yvan KOENIG (VALLAURIS, France)
    modifié 2010/08/17
    property closeIt : true
    (* true = closes the saved document
    false = doesn't close it *)
    property theApp : "Numbers"
    property theExt : "numbers"
    --=====
    on run
    tell application theApp
    activate
    set le_document to front document
    if modified of le_document then save le_document
    delay 0.2
    set thePath to path of document 1
    end tell -- theapp
    set {xPath, xExt} to my saveAs(thePath)
    if closeIt then tell application theApp to close document 1 saving no
    end run
    --=====
    on saveAs(p)
    local extension_export, type_export, nomde_loriginal, dossierde_loriginal, nomde_lexport, cheminde_lexport
    set {extension_export, type_export} to {"pdf", "LSDocumentTypePDF"}
    set {nomde_loriginal, dossierde_loriginal} to my quelNomEtDossier(p)
    if nomde_loriginal ends with theExt then
    • replace the original extension by the xExt one *)
    set nomde_lexport to (text 1 thru -(1 + (length of theExt)) of nomde_loriginal) & extension_export
    else
    • add the xExt extension name *)
    set nomde_lexport to nomde_loriginal & "." & extension_export
    end if
    set cheminde_lexport to dossierde_loriginal & nomde_lexport
    • CAUTION, When saving, Numbers doesn't take care of an existing document.
    It replaces it by the new one. *)
    tell application "System Events"
    if exists (file cheminde_lexport) then
    Playing safety, we rename the existing file by inserting a modificationdatetime stamp *)
    set name of file cheminde_lexport to (text 1 thru -(2 + (length of extension_export)) of nomde_lexport) & my horoDateur(modification date of file cheminde_lexport) & "." & extension_export
    end if
    end tell -- System Events
    • save as type_export document *)
    tell application "Numbers" to save document nomde_loriginal as type_export in cheminde_lexport
    return {cheminde_lexport, extension_export}
    end saveAs
    -- =====
    on quelNomEtDossier(f)
    local nom, dossier
    tell application "System Events" to tell file (f as Unicode text)
    set nom to name (* Unicode text *)
    set dossier to path of container (* Unicode HFS path *)
    end tell -- to System Events
    return {nom, dossier}
    end quelNomEtDossier
    --=====
    • Build a stamp from the modification date_time
    on horoDateur(datedemodification)
    local les_secondes
    set les_secondes to time of datedemodification
    return ("_" & year of datedemodification & text -2 thru -1 of ("0" & (month of datedemodification as integer)) & text -2 thru -1 of ("0" & day of datedemodification) & "_" & text -2 thru -1 of ("0" & les_secondes div 3600) & text -2 thru -1 of ("0" & (les_secondes mod 3600) div 60) & text -2 thru -1 of ("0" & les_secondes mod 60))
    (* Here, the stamp is "YYYYMMDDhhmmss" *)
    end horoDateur
    --=====
    --[/SCRIPT]
    Yvan KOENIG (VALLAURIS, France) mardi 17 août 2010 18:16:27

Maybe you are looking for

  • How to pass the parameter in "Data Template"

    Hi, Can any one please help me out to sort the problem, "Passing Parameter and checking condition for the parameters in the "data template". And also please tell me how to link the multiple query in "Data template", as per the user guide i have it sa

  • Alert About battery dumped using showfaults is not present in syslog

    Hello, My problem is the following: when I am connected on sc and with showfaults command I can see the warning concerning the battery threshold, but this warning do not appear in syslog under /var/log/. And also when using prtdiag -v command nothing

  • Hi everybody, JSP+servlets+.exe execution+package problem

    hi, i've read on java's forums that it is possible to execute an external class from a JSP and this (external class) can execute an .exe(Runtime a = Runtime.getRuntime()) i don't know if it was developed with JSP or servlet because they didn't put th

  • Won't wake up from sleep mode

    I have only had my iMac for a couple weeks and four times now it won't wake up from sleep mode. I have to use the on/off button for a response.

  • After kernel update to .37 changeg the profiles in konsole

    i want to fix em ... but when i am open again konsole or yakuake the default profile is shown ... i use a custom profile ....