Why does not my Pages app work?

I have got a problem with Pages. Since I have been using the IWork for many years, I am aware how to do it. Now I updated the apps and I can not open it when I turn on the ICloud. There is no problem with Keynote and numbers. Only the Pages.
When I try to open it, disappears.
Thanks

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Similar Messages

Safari says "i cannot open the page because the server cannot be found" I get this on Safari and Mail does not function. Apps work like a dream. All Windows OS are screaming. Any thoughts?

Safari says "i cannot open the page because the server cannot be found" I get this on Safari and Mail does not function. Apps work like a dream. All Windows OS are screaming. Any thoughts?

You can check this thread for the answer you are looking for.
https://discussions.apple.com/thread/3685247?start=0&tstart=0

Why does not my servo motor work?

Hello all,
I can work my servo motors, so I have two questions.
Firstly, I'm using PXI-7340 & UMI 7764 to control AC motor on servo motor (TAMAGAWA SEIKI co.),
But in MAX, motor doesn't work with servo type.And there is no signal between AnalogOutput and AnalogOutputGround.
Can I connect UMI to the motor correctly?
Now, I connect encorder signals with changing differential line driver (motor driver) to TTL (UMI) using quadruple differential line receiver.
Is it right?
If it is right, why does the motor work?
Secondarily, when I use stepper type in MAX, the motor work with open-loop. But when I use stepper type in MAX, the motor doesn't work with cloosed-loop.Why?
Polarities of encorders(A, B, Index) make matches my servo motors by setting in MAX.
Why?
Thanks,
megumi
Attachments:
TAMAGAWA SEIKI motor&driver.pdf ‏3063 KB

Thank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi

Why does not open(fileObj,rawOpt); work properly?

Hi!
I'm trying to open a RAW file without header, so I want to say to Photoshop what dimensions I want. This is my idea:
var filename = File.openDialog("RAW");
if (filename) {
var rawOpt = new CameraRAWOpenOptions();
rawOpt.settings = CameraRAWSettingsType.CAMERA;
var fileObj = new File(filename);
rawOpt.bitsPerChannel = BitsPerChannelType.EIGHT;
rawOpt.width=30;
rawOpt.height=1000;
rawOpt.channelNumber=3;
docRef = open(fileObj,rawOpt);
But my Photoshop CS2 fails telling me that docRef = open(fileObj,rawOpt); is not implented.
However, if I use open(fileObj) it works, but it shows me a dialog to insert dimensions and I don't like that.
Any idea/suggestion?
Thanks a lot for your time.
BTW. I inserted this question in the wrong forum before, so now I put it here. Sorry for any inconvenience.

Thank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi

Why does not my iPhone 5S work on LTE of Plus GSM network in Poland although my model supports LTE Band 3?

am My iPhone 5S does not support LTE of the Plus GSM network in Poland? It works in Band 3 and my model supports that band but it is not possible to use LTE although it works on my other Android phone. The network operator suggested contacting Apple.

Thank yo Tim, but actually I beg to disagree with you about that I chose to use the wrong carrier. But I have not given all details of the story:
When I was buying the iPhone at an Apple store in the US I explicitly asked whether LTE would work on my network in Poland,which uses LTE Band 3. She was very nice and checked something in the specifications and said that the model I would buy supports this band so that everything would be fine.
Unfortunately back in the country it turns out it does not work not and I expect Apple to take a stand on that. I have already filed a complaint on Apple helpline. I hope they will solve the problem...

Why does not USB flash card work?

MacBook Pro 13' (late 2011)
OS X Yosemite 10.10
My USB hub does not see any flash card, but it works when I use my iPhone.
What have I done: I tried to open my flash card. Then, I cleaned my flash card with Disk Utility and tried to connect to Mac again. I also tried to use different flash cards. But there was no effect.

Thank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi

Why does not my hdmi kabel work from my iMac to my receiver?

I have bought a new HDMI kabel, the last one worked fine. But i needed a longer one this time. And now I dont get picture nor sound on my TV??? Help!

Apparently an HDMI cable over 50 feet in length will begin to suffer signal degradation. Does this apply in your case?
Hope this helps

Why does Notes (internal ML app) create a saved note every time I edit the one I'm writing?

Hello Folks!
My problem with Notes is the following. I'll explain it through an example because I think that's the easiest way to make it clear.
Well, I open Notes and start to write down a new note; suppose I type "Ask Sarah about course book" then I notice I made a mistake: it's not Sarah, it's Loren, so I edit my previous note to have "Ask Loren about course book", but at the end my result is not having only one note, I have two! One with "Sarah" and another with "Loren"! Now, if you think about this in a more general way, you can understand what happens on my Notes: I've not actually found a rule Notes follows to create these new different notes. I only know that whenever I write down a note I end up with a huge number of them, which are nothing else than the previous version of the same note.
Anyone has ever heard of this bug?

When you use IMAP, as opposed to "On my Mac," Notes will create a folder called "Notes" on the mail server. It will then store notes in there. If you create subfolders in Notes (which you can do), those will be stored as subfolders of Notes on the server.
So in the case of Gmail, you should be able to log onto your Gmail web account and the notes should probably show up in "All my Mail" with a label of Notes (this is because Gmail's IMAP implementation is VERY nonstandard and it doesn't actually support folders; it uses labels instead). If you view the Notes label in Gmail's web interface you should see all your notes.
Because of Gmail's IMAP implementation you should be very careful not to remove the "Notes" label from any of your notes if you're in the web interface, or they will disappear from the Notes app on OS X itself.

Why does not drag and drop work?!

Hello,
I am trying to implent a drag and drop from a table to an icon representing a trash.
The drop handler fails in converting the selected rows to a list:
com.sun.el.MethodExpressionImpl@87d9c00d javax.el.ELException: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.List
Could you help me to understand why? Below are the details.
This is the af:table:
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{bindings.MyView1.collectionModel}"
rowSelection="multiple"
columnStretching="last"
horizontalGridVisible="false"
verticalGridVisible="false" fetchSize="-1"
autoHeightRows="6" width="190"
disableColumnReordering="true">
<af:column sortable="true" headerText="Entry" id="c1"
align="start">
<af:outputText value="#{row.Description}" id="ot1"/>
</af:column>
<af:dragSource actions="MOVE" defaultAction="MOVE"
discriminant="delete"/>
</af:table>
This is the drop area:
<af:image source="Images/empty_trash_32.png" id="i2">
<af:dropTarget dropListener="#{backingBeanScope.DropHandlerBean.dropHandler}"
actions="MOVE">
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="delete"/>
</af:dropTarget>
</af:image>
This is the failing listener listener (the failing point is bold):
public DnDAction dropHandler(DropEvent dropEvent) {
DnDAction dnda = DnDAction.NONE;
if (dropEvent.getProposedAction() == DnDAction.MOVE) { // delete
RichTable table = (RichTable)dropEvent.getDragComponent();
//determine the rows that are dragged over
Transferable t = dropEvent.getTransferable();
//when looking for data, use the same discriminator as defined
//on the drag source
DataFlavor<RowKeySet> df =
DataFlavor.getDataFlavor(RowKeySet.class, "delete");
RowKeySet rks = t.getData(df);
if (rks == null) {
return DnDAction.NONE;
Iterator iter = rks.iterator();
while (iter.hasNext()) {
//get next selected row key
System.out.println(rks.toArray().length); // the number of selected rows is ok
List key = (List)iter.next(); // here gives: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.List
//make row current so we can access it
table.setRowKey(key);
//the table model represents its row by the ADF binding class,
//which is JUCtrlHierNodeBinding
JUCtrlHierNodeBinding rowBinding =
(JUCtrlHierNodeBinding)table.getRowData();
Row row = (Row)rowBinding.getRow();
//delete row;
row.remove();
//activate animation
dnda = DnDAction.MOVE;
return dnda;
thanks.

I did try, I obtained this:
java.lang.NullPointerException
Why NullPointerException?
I don't know if this helps, but consider that the collection model comes from a ViewObject built on three EOs with many fields, although the table only shows one column.
This is the Iterator in my pageDef:
<table IterBinding="MyView1Iterator" id="MyView1">
<AttrNames>
<Item Value="Cod1"/>
<Item Value="Cod2"/>
<Item Value="Cod3"/>
<Item Value="Cod4"/>
<Item Value="Description"/>
<Item Value="Cod5"/>
</AttrNames>
</table>
Any idea?
I will see the Key content with the debugger.

Why does not photo e-mail work in Photoshop elements 12 and Windows 8.1?

I've tried to send photo e-mail with my new computer. We have used this function for many years with Elements 5 and Windows XP,

More info: First time I got a message to confirm my e.mail address returning an answere and a code, The problem is that I've got no e-mail. I have tried both my two e-post programs, Thunderbird and Outlook (within Windows8) and I hav tried them both to bi 'Standard program'.

Hello to you in the company Apple. I am having a problem in the Apple Store ID does not allow me to work on the Apple Store I hope that you will help. You have sent you yesterday and today I want to call the phone number for Mei you and explain to you why

Hello to you in the company Apple. I am having a problem in the Apple Store ID does not allow me to work on the Apple Store I hope that you will help. You have sent you yesterday and today I want to call the phone number for Mei you and explain to you why with many thanks

Sorry, but you can't reach Apple here. This is a user to user forum and Apple does not follow these discussions.
Try this link to contact Apple directly:
Apple - Support - iPhone - Contact Support
Did you already have a look at this page?
App Store Frequently Asked Questions (FAQ)

With regards to my mini ipad, it does not update my apps, what i get is a blank page with the icons below the page only, how to update?

With regard to my mini ipad, I'm unable to update my apps. What I get is just a blank page with the icons (features / top charts / genius etc) below.Tried rebooting but still get the same results.

From Demo:
If you are getting the blank app update screen, many people are having this problem over the last couple of days.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.
If the above does not work try:
I understand that your App Store does not show your app updates. Please follow the steps below to help resolve the issue.
1. Close All Apps on iPad: http://support.apple.com/kb/ht5137
2. Sign out of iTunes & App Stores: Settings > iTunes & App Stores > Tap AppleID > Sign out
3. Reset All Settings: Settings > General > Reset > Reset All Settings
4. Reboot iPad
5. Sign back into iTunes and App Stores: Settings > iTunes & App Stores > Sign In with AppleID
Thank you for being an iTunes store customer. Apple appreciates your business.

Why does my php export feature work in IE and not firefox?

Why does my php export feature work in IE and not Firefox? I've written a web application which contains a SigmaGrid. The grid controls reload, add update delete, print and export to csv all work in IE8. The export feature does not work in Firefox.

I'm not sure what's going on for you. I've had 4 other developers - two on Comcast and two on Fios review my work and they get the control and export action in the IE8 version but not the FF10 version.
Thanks for looking into this for me, though. I appreciate the effort. '' The operation was a success doctor, but the patient died.''

Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

%@ page import="..." % does not seem to be working correctly

Hi,
          I am running Weblogic 6.1 sp1 and I am having a problem with import page
          directive. <%@ page import="my.package.*" %> does not appear to be working
          correctly when I try to reference classes in imported packages (my.package,
          etc.) from the useBean tag.
          The following code works with Resin, but not Weblogic:
          <%@ page import="my.package.*" %>
          <jsp:useBean id="errorBean" class="ErrorBean" scope="request"/>
          If, I take out the page directive, and change the useBean tag to:
          <jsp:useBean id="errorBean" class="my.package.ErrorBean"
          scope="request"/>
          then the page compiles and runs just fine.
          Michael


Here's a snippet from Sun's j2ee tutorial
          (http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPBeans4.html):
          <jsp:useBean id="beanName"
          class="fully_qualified_classname" scope="scope"/>
          But I agree with you, the excerpt you posted seems to include the
          useBean tag, which is misleading.
          Nils
          Michael Hill wrote:
          >
          > I don't think this is the way it is "supposed" to be. Here is an excerpt
          > from the JSP Syntax reference on http://developer.java.sun.com
          > on the page directive:
          >
          > import= "{ package.class | package.* }, ..."
          > A comma-separated list of one or more packages that the JSP file should
          > import. The packages (and their classes) are available to scriptlets,
          > expressions, declarations, and tags within the JSP file. You must place the
          > import attribute before the tag that calls the imported class. If you want
          > to import more than one package, you can specify a comma-separated list
          > after import or you can use import more than once in a JSP file.
          >
          > ---
          >
          > It says the packages are available to tags within the JSP file as long as
          > you place the import before the tag that calls the imported class. In my
          > case, I am placing the import before the <jsp:useBean> tag.
          >
          > Michael
          >
          > "Nils Winkler" <[email protected]> wrote in message
          > news:[email protected]...
          > > I'm pretty sure that you have to specify the fully qualified class name
          > > in the useBean tag. import won't help you here.
          > >
          > > Nils
          > >
          > > Michael Hill wrote:
          > > >
          > > > Hi,
          > > >
          > > > I am running Weblogic 6.1 sp1 and I am having a problem with import page
          > > > directive. <%@ page import="my.package.*" %> does not appear to be
          > working
          > > > correctly when I try to reference classes in imported packages
          > (my.package,
          > > > etc.) from the useBean tag.
          > > >
          > > > The following code works with Resin, but not Weblogic:
          > > >
          > > > <%@ page import="my.package.*" %>
          > > > <jsp:useBean id="errorBean" class="ErrorBean" scope="request"/>
          > > >
          > > > If, I take out the page directive, and change the useBean tag to:
          > > >
          > > > <jsp:useBean id="errorBean" class="my.package.ErrorBean"
          > > > scope="request"/>
          > > >
          > > > then the page compiles and runs just fine.
          > > >
          > > > Michael
          > >
          > > --
          > > ============================
          > > [email protected]
          ============================
          [email protected]

Why does not my Pages app work?

Similar Messages

Maybe you are looking for