Why does not photo e-mail work in Photoshop elements 12 and Windows 8.1?
I've tried to send photo e-mail with my new computer. We have used this function for many years with Elements 5 and Windows XP,
More info: First time I got a message to confirm my e.mail address returning an answere and a code, The problem is that I've got no e-mail. I have tried both my two e-post programs, Thunderbird and Outlook (within Windows8) and I hav tried them both to bi 'Standard program'.
Similar Messages
-
Why does not my servo motor work?
Hello all,
I can work my servo motors, so I have two questions.
Firstly, I'm using PXI-7340 & UMI 7764 to control AC motor on servo motor (TAMAGAWA SEIKI co.),
But in MAX, motor doesn't work with servo type.And there is no signal between AnalogOutput and AnalogOutputGround.
Can I connect UMI to the motor correctly?
Now, I connect encorder signals with changing differential line driver (motor driver) to TTL (UMI) using quadruple differential line receiver.
Is it right?
If it is right, why does the motor work?
Secondarily, when I use stepper type in MAX, the motor work with open-loop. But when I use stepper type in MAX, the motor doesn't work with cloosed-loop.Why?
Polarities of encorders(A, B, Index) make matches my servo motors by setting in MAX.
Why?
Thanks,
megumi
Attachments:
TAMAGAWA SEIKI motor&driver.pdf 3063 KBThank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi -
Why does not open(fileObj,rawOpt); work properly?
Hi!
I'm trying to open a RAW file without header, so I want to say to Photoshop what dimensions I want. This is my idea:
var filename = File.openDialog("RAW");
if (filename) {
var rawOpt = new CameraRAWOpenOptions();
rawOpt.settings = CameraRAWSettingsType.CAMERA;
var fileObj = new File(filename);
rawOpt.bitsPerChannel = BitsPerChannelType.EIGHT;
rawOpt.width=30;
rawOpt.height=1000;
rawOpt.channelNumber=3;
docRef = open(fileObj,rawOpt);
But my Photoshop CS2 fails telling me that docRef = open(fileObj,rawOpt); is not implented.
However, if I use open(fileObj) it works, but it shows me a dialog to insert dimensions and I don't like that.
Any idea/suggestion?
Thanks a lot for your time.
BTW. I inserted this question in the wrong forum before, so now I put it here. Sorry for any inconvenience.Thank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi -
am My iPhone 5S does not support LTE of the Plus GSM network in Poland? It works in Band 3 and my model supports that band but it is not possible to use LTE although it works on my other Android phone. The network operator suggested contacting Apple.
Thank yo Tim, but actually I beg to disagree with you about that I chose to use the wrong carrier. But I have not given all details of the story:
When I was buying the iPhone at an Apple store in the US I explicitly asked whether LTE would work on my network in Poland,which uses LTE Band 3. She was very nice and checked something in the specifications and said that the model I would buy supports this band so that everything would be fine.
Unfortunately back in the country it turns out it does not work not and I expect Apple to take a stand on that. I have already filed a complaint on Apple helpline. I hope they will solve the problem... -
Why does not USB flash card work?
MacBook Pro 13' (late 2011)
OS X Yosemite 10.10
My USB hub does not see any flash card, but it works when I use my iPhone.
What have I done: I tried to open my flash card. Then, I cleaned my flash card with Disk Utility and tried to connect to Mac again. I also tried to use different flash cards. But there was no effect.Thank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi -
Why does my photo stream stop working
My photo stream stops working can anyone help
Have you looked here on the troubleshooting website?
http://support.apple.com/kb/TS3989 -
Why are my photos printed after work in photoshop coming our with faded color?
I am on a Mac with Maverick, using Photoshop CS6 and Lightroom 5. I am doing a portrait of 24 people and need to combine several photos to get an appealing final product. I move my photos from Lightroom and in Photoshop using mask layers have been combining the pictures. When I transfer them out as a Jpeg, and send them to a commercial printer they come out with a faded color look. I am at my whits end trying to figure out what I am doing wrong. Does anyone know what the solution is to this frustrating problem?
So gator, I am using a calibrator on my monitor and both printers Costco and Mpixpro are giving me the same results. If I dont do more than two layers in my work, I get fantastic results that I am totally pleased with. It is only when I involve multiple pictures and multiple layers. Are you saying to be in ProPhotoRGB unitl I create it into a Jpeg and then change it to a sRBG, for export to the printer. Do my settings look correct to you in LR and PS? Because, the more I here from the Forum, the more I think it is a setting deaper than my knowlege goes. Help please! I am attaching an example of my finished product in LR and it looks the Same in Photoshop as you can see. So I am including a view in my LR of the screen shot, a view in PS w the layers after the layers have been flattened, then a shot of saving it (But I have been saving it in "standard" not "optimized as in this picture) but you notice it is saying it is saving it as a ProPhotoRGB, and the last shot is the screenshot of it as a Jpeg in PS. Also I am including Info shots on the screen of the PS file and the Jpeg in hopes someone will see my problem and know the solution. When I do info checks, they show sRBG about 80% and ProPhotoRBG about 20% even though I have used the same steps? I have tried to capture a bunch of my work in screen shots that you might see the issue. Thanks so much for your time and help!
-
Does the Lens Profile Creator work with Photoshop Elements 8.0..?
Hello,
I am very new to the world of Photoshop, so please forgive if this is an obvious/stupid question...
I am using Photoshop Elements 8.0 and I have a couple of pictures that I need to remove the 'fish eye' lens distortion from around the edges...
The blurb for the Lens Profile Creator says that it is for use in the "Adobe Photoshop® family of products"...
Does this include Photoshop Elements 8.0 or do they really mean it is just for Photoshop CS5, Camera Raw and Photoshop Lightroom...
Any help will be appreciated...
Many Thanks
mc1903ukPSE does not have the user-interface to turn on lens-corrections, nor does the ACR 6.1 update for PSE contain the lens-profile database installer, so if PSE is the only member of the PS-family that you have installed then effectively you cannot apply lens profiles.
If a computer has the lens-profile database installed and lens-distortion-correction has been enabled in the XMP sidecar for a particular image, both requiring PS-CS5's ACR 6.1-updater or LR3 to be installed and one of those used to enable lens-corrections for the image, then PSE can use ACR 6.1 to apply a lens profile, because the version of the ACR 6.1 plug-in for PS and PSE is the same plug-in.
BTW, removing fish-eye distortion completely, which is what enabling lens-corrections does by default, will leave a rather poor looking image that has been completely rectilinearized but has severe stretching of the pixels at the edges, so only the center is useable. With my 8mm Sigma fisheye, I reduce the Distortion part of the correction down to 44 so the black corners are gone, but there is still some bulging of the image.
If you want to experiment with lens-corrections, you could install the 30-day trial of LR3. -
How do I get Photo Editor to work in Photoshop Elements 12?
My Photoshop Elements 12 (PSE-12) worked fine until I recently had to repair/recover my (only) PC (Win7prof, 64bit, 2 TB HDD, 8GB RAM). I didn’t then know about any de-activationsif in case that might be the cause. Now I have done all ‘Adobe’s ‘formalities’ (AdobeID, AdobeAccount, installed CreativeCloud) and tried to ‘sign-out’ in CreativeCloud to de-activate according to instructions in Help – and then re-installed the PSE-12. But only Organizer seems to be installed, not PhotoEditor, the module I really need.
How shall I get PhotoEditor to work again? Helo asap is much appreciated. Pertti Rönnbergreset your preferences -
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails:
uninstall pse 12.
clean http://www.adobe.com/support/contact/cscleanertool.html
then reinstall. -
Photoshop Elements and Windows Live Mail :(
Had Adobe come out with a patch yet to fix their oversight regarding WLM? Windows 7 had WLM and you can't get PE to send photos to WLM. It's very disappointing. I hate to abandon my favorite photo email software for something that works...... but looks like I'll have to.
ADOBE PEOPLE - PLEASE HELP.
signed...
Gale in upstate NY.I'll repost this problem. How do you get Photoshop Elements 8 to work with Windows Live Mail that comes with Windows 7? THANKS.
-
Why does not my hdmi kabel work from my iMac to my receiver?
I have bought a new HDMI kabel, the last one worked fine. But i needed a longer one this time. And now I dont get picture nor sound on my TV??? Help!
Apparently an HDMI cable over 50 feet in length will begin to suffer signal degradation. Does this apply in your case?
Hope this helps -
Why does not my Pages app work?
I have got a problem with Pages. Since I have been using the IWork for many years, I am aware how to do it. Now I updated the apps and I can not open it when I turn on the ICloud. There is no problem with Keynote and numbers. Only the Pages.
When I try to open it, disappears.
ThanksTry this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom -
Why does my apple ID password work everywhere except iTunes and the App Store?
I need help guys my App Store and iTunes are not accepting my apple I'd password, but it works online? Does anyone know what to do
It's not meant to be an answer, it's meant to be a suggestion.
You'll notice I said, "Try"...
You can use the email form here > Apple - Support - Mac App Store - Contact Support
Maybe Apple can help you directly. -
Camera raw does not update to 8.5 with CC 2014 and windows 7
Camera raw is 8.0 after the last update of CC2014?
Please follow the below mentioned steps to resolve the issue:
Quit and Relaunch CC app
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-connection-faq.html#id_10491
Open the Adobe Creative Cloud application.
Mac OS: Go to the Applications folder and open the Adobe Creative Cloud alias.
Windows 7: Go to Start > All Programs > Adobe Creative Cloud
Windows 8: Open the Adobe Creative Cloud application from the Start Screen.
Click the Apps tab in the Adobe Creative Cloud applications.
Click on All Apps, then Previous Version
Your installed CC Product would be listed, Click on Install Drop-down and then select the CC 2014 to install.
After Successful Installation, Update your Product
Let me know if you are still not able to Update ACR.
Regards,
Ashutosh -
Does Camera Raw 6.3 work with Photoshop Elements 8
It looks like I can't
update Camera Raw to 6.3. since I use PSE8..is that true? I only update PSE every two
editions, but have both a Canon 550D and a new Powershot S95. Any advice?Yes that's true, 6.3 won't work with pse8.
You can use the 6.3 dng converter to convert your camera raw files to
the dng format which pse8 can then open.
Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4924
Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4923
MTSTUNER
Maybe you are looking for
-
How do i use an external hard drive in conjunction with my itunes account?
I'm having so much trouble locating music from my itunes account that i previously transferred onto an external hard drive. I regularly get messages with each sync i try to do telling me that songs could not be located. Also when i try to play cert
-
Port forwarding for XBOX One on Airport 6.3.1
Hi there, firstly i'm going to have to say i'm not particularly technical whatsoever when it comes to computers but i'll try and be as precise as possible. I purchased an XBOX One console last week along with several games. They all work fine both of
-
Reading iMacG5 superdrive discs on g4 powerbook with OS9.2
Hello: I have burnt DVD's and CD-R's using both the Disc Utility and Roxio Toast Lite on the G5 Superdrive. They read in fine on the G5 but when I attempt to read them on my G4 powerbook ( which uses OS9.2 and does not have a built in burner ) the la
-
Hi, Material number is not updated in FI document when MIGO is posted with reference to PO as PO generated against a material. Please let me know. Additionally If the PO having more than 1 lines with different material numbers, when MIGO is carried t
-
Checking for files using infoview
Hi I am new to use Infoview in BO. In my project they are scheduling CR in infoview for a particular time. now new requirement is : On nightly basis files will be send for each region.once they are loaded message will be generated using script in uni